[PATCH v5 1/2] dt-bindings: mediatek: Add MT8173 cpufreq driver binding
Pi-Cheng Chen
pi-cheng.chen at linaro.org
Tue Jun 30 19:16:44 PDT 2015
This patch adds device tree binding document for MT8173 cpufreq driver.
Signed-off-by: Pi-Cheng Chen <pi-cheng.chen at linaro.org>
Reviewed-by: Michael Turquette <mturquette at baylibre.com>
---
.../devicetree/bindings/cpufreq/cpufreq-mt8173.txt | 145 +++++++++++++++++++++
1 file changed, 145 insertions(+)
create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-mt8173.txt
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mt8173.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-mt8173.txt
new file mode 100644
index 0000000..65701c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-mt8173.txt
@@ -0,0 +1,145 @@
+
+Mediatek MT8173 cpufreq driver
+------------------------------
+
+Mediatek MT8173 cpufreq driver for CPU frequency scaling.
+
+Required properties:
+- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock names.
+- clock-names: Should contain the following:
+ "cpu" - The multiplexer for clock input of CPU cluster.
+ "intermediate" - A parent of "cpu" clock which is used as "intermediate" clock
+ source (usually MAINPLL) when the original CPU PLL is under
+ transition and not stable yet.
+ Please refer to Documentation/devicetree/bindings/clk/clock-bindings.txt for
+ generic clock consumer properties.
+- operating-points: Please refer to Documentation/devicetree/bindings/power/opp.txt for
+ details.
+- proc-supply: Regulator for Vproc of CPU cluster.
+
+Optional properties:
+- sram-supply: Regulator for Vsram of CPU cluster. When present, the cpufreq driver
+ needs to do "voltage trace" to step by step scale up/down Vproc and
+ Vsram to fit SoC specific needs. When absent, the voltage scaling
+ flow is handled by hardware, hence no software "voltage trace" is
+ needed.
+- #cooling-cells:
+- cooling-min-level:
+- cooling-max-level:
+ Please refer to Documentation/devicetree/bindings/thermal/thermal.txt.
+
+Example:
+--------
+ cpu0: cpu at 0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x000>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ clocks = <&infracfg CLK_INFRA_CA53SEL>,
+ <&apmixedsys CLK_APMIXED_MAINPLL>;
+ clock-names = "cpu", "intermediate";
+ operating-points = <
+ 507000 859000
+ 702000 908000
+ 1001000 983000
+ 1105000 1009000
+ 1183000 1028000
+ 1404000 1083000
+ 1508000 1109000
+ 1573000 1125000
+ >;
+ #cooling-cells = <2>;
+ cooling-min-level = <0>;
+ cooling-max-level = <7>;
+ };
+
+ cpu1: cpu at 1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x001>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ clocks = <&infracfg CLK_INFRA_CA53SEL>,
+ <&apmixedsys CLK_APMIXED_MAINPLL>;
+ clock-names = "cpu", "intermediate";
+ operating-points = <
+ 507000 859000
+ 702000 908000
+ 1001000 983000
+ 1105000 1009000
+ 1183000 1028000
+ 1404000 1083000
+ 1508000 1109000
+ 1573000 1125000
+ >;
+ #cooling-cells = <2>;
+ cooling-min-level = <0>;
+ cooling-max-level = <7>;
+ };
+
+ cpu2: cpu at 100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x100>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ clocks = <&infracfg CLK_INFRA_CA57SEL>,
+ <&apmixedsys CLK_APMIXED_MAINPLL>;
+ clock-names = "cpu", "intermediate";
+ operating-points = <
+ 507000 828000
+ 702000 867000
+ 1001000 927000
+ 1209000 968000
+ 1404000 1007000
+ 1612000 1049000
+ 1807000 1089000
+ 1989000 1125000
+ >;
+ #cooling-cells = <2>;
+ cooling-min-level = <0>;
+ cooling-max-level = <7>;
+ };
+
+ cpu3: cpu at 101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57";
+ reg = <0x101>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ clocks = <&infracfg CLK_INFRA_CA57SEL>,
+ <&apmixedsys CLK_APMIXED_MAINPLL>;
+ clock-names = "cpu", "intermediate";
+ operating-points = <
+ 507000 828000
+ 702000 867000
+ 1001000 927000
+ 1209000 968000
+ 1404000 1007000
+ 1612000 1049000
+ 1807000 1089000
+ 1989000 1125000
+ >;
+ #cooling-cells = <2>;
+ cooling-min-level = <0>;
+ cooling-max-level = <7>;
+ };
+
+ &cpu0 {
+ proc-supply = <&mt6397_vpca15_reg>;
+ };
+
+ &cpu1 {
+ proc-supply = <&mt6397_vpca15_reg>;
+ };
+
+ &cpu2 {
+ proc-supply = <&da9211_vcpu_reg>;
+ sram-supply = <&mt6397_vsramca7_reg>;
+ };
+
+ &cpu3 {
+ proc-supply = <&da9211_vcpu_reg>;
+ sram-supply = <&mt6397_vsramca7_reg>;
+ };
--
1.9.1
More information about the Linux-mediatek
mailing list