[PATCH v3 2/2] regulator: mt6311: Add support for mt6311 regulator
Javier Martinez Canillas
javier at dowhile0.org
Thu Jul 23 02:07:56 PDT 2015
Hello Henry,
Driver looks mostly good for me now but I just found some things I
missed in the last revision.
On Thu, Jul 23, 2015 at 5:39 AM, Henry Chen <henryc.chen at mediatek.com> wrote:
> Add regulator support for mt6311.
> It has 2 regulaotrs - Buck and LDO, provide the related buck/ldo voltage
> data to the driver, and creates the regulator_desc table. Supported
> operations for Buck are enabled/disabled and voltage change, only
> enabled/disabled for LDO.
>
> Signed-off-by: Henry Chen <henryc.chen at mediatek.com>
> ---
> drivers/regulator/Kconfig | 9 ++
> drivers/regulator/Makefile | 1 +
> drivers/regulator/mt6311-regulator.c | 183 +++++++++++++++++++++++++++++++++++
> drivers/regulator/mt6311-regulator.h | 65 +++++++++++++
> include/linux/regulator/mt6311.h | 29 ++++++
> 5 files changed, 287 insertions(+)
> create mode 100644 drivers/regulator/mt6311-regulator.c
> create mode 100644 drivers/regulator/mt6311-regulator.h
> create mode 100644 include/linux/regulator/mt6311.h
>
> diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
> index bef3bde..aab09ac 100644
> --- a/drivers/regulator/Kconfig
> +++ b/drivers/regulator/Kconfig
> @@ -451,6 +451,15 @@ config REGULATOR_MC13892
> Say y here to support the regulators found on the Freescale MC13892
> PMIC.
>
> +config REGULATOR_MT6311
> + tristate "MediaTek MT6311 PMIC"
> + depends on I2C
> + help
> + Say y here to select this option to enable the power regulator of
> + MediaTek MT6311 PMIC.
> + This driver supports the control of different power rails of device
> + through regulator interface.
> +
> config REGULATOR_MT6397
> tristate "MediaTek MT6397 PMIC"
> depends on MFD_MT6397
> diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
> index 91bf762..45e790f 100644
> --- a/drivers/regulator/Makefile
> +++ b/drivers/regulator/Makefile
> @@ -60,6 +60,7 @@ obj-$(CONFIG_REGULATOR_MAX77843) += max77843.o
> obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
> obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
> obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
> +obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o
> obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o
> obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
> obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o
> diff --git a/drivers/regulator/mt6311-regulator.c b/drivers/regulator/mt6311-regulator.c
> new file mode 100644
> index 0000000..3c926a2
> --- /dev/null
> +++ b/drivers/regulator/mt6311-regulator.c
> @@ -0,0 +1,183 @@
> +/*
> + * Copyright (c) 2015 MediaTek Inc.
> + * Author: Henry Chen <henryc.chen at mediatek.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/err.h>
> +#include <linux/gpio.h>
> +#include <linux/i2c.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/module.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/driver.h>
> +#include <linux/regulator/machine.h>
> +#include <linux/regulator/of_regulator.h>
> +#include <linux/regulator/mt6311.h>
> +#include <linux/slab.h>
> +#include "mt6311-regulator.h"
> +
> +static const struct regmap_config mt6311_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = MT6311_FQMTR_CON4,
> +};
> +
> +/* Default limits measured in millivolts and milliamps */
> +#define MT6311_MIN_UV 600000
> +#define MT6311_MAX_UV 1400000
> +#define MT6311_STEP_UV 6250
> +
> +static const struct regulator_linear_range buck_volt_range[] = {
> + REGULATOR_LINEAR_RANGE(MT6311_MIN_UV, 0, 0x7f, MT6311_STEP_UV),
> +};
> +
> +static struct regulator_ops mt6311_buck_ops = {
> + .list_voltage = regulator_list_voltage_linear_range,
> + .map_voltage = regulator_map_voltage_linear_range,
> + .set_voltage_sel = regulator_set_voltage_sel_regmap,
> + .get_voltage_sel = regulator_get_voltage_sel_regmap,
> + .set_voltage_time_sel = regulator_set_voltage_time_sel,
> + .enable = regulator_enable_regmap,
> + .disable = regulator_disable_regmap,
> + .is_enabled = regulator_is_enabled_regmap,
> +};
> +
> +static struct regulator_ops mt6311_ldo_ops = {
> + .enable = regulator_enable_regmap,
> + .disable = regulator_disable_regmap,
> + .is_enabled = regulator_is_enabled_regmap,
> +};
> +
> +#define MT6311_BUCK(_id) \
> +{\
> + .name = #_id,\
> + .ops = &mt6311_buck_ops,\
> + .of_match = of_match_ptr(#_id),\
> + .regulators_node = of_match_ptr("regulators"),\
> + .type = REGULATOR_VOLTAGE,\
> + .id = MT6311_ID_##_id,\
> + .n_voltages = (MT6311_MAX_UV - MT6311_MIN_UV) / MT6311_STEP_UV + 1,\
> + .min_uV = MT6311_MIN_UV,\
> + .uV_step = MT6311_STEP_UV,\
> + .owner = THIS_MODULE,\
> + .linear_ranges = buck_volt_range, \
> + .n_linear_ranges = ARRAY_SIZE(buck_volt_range), \
> + .enable_reg = MT6311_VDVFS11_CON9,\
> + .enable_mask = MT6311_PMIC_VDVFS11_EN_MASK,\
> + .vsel_reg = MT6311_VDVFS11_CON12,\
> + .vsel_mask = MT6311_PMIC_VDVFS11_VOSEL_MASK,\
> +}
> +
> +#define MT6311_LDO(_id) \
> +{\
> + .name = #_id,\
> + .ops = &mt6311_ldo_ops,\
> + .of_match = of_match_ptr(#_id),\
> + .regulators_node = of_match_ptr("regulators"),\
> + .type = REGULATOR_VOLTAGE,\
> + .id = MT6311_ID_##_id,\
> + .owner = THIS_MODULE,\
> + .enable_reg = MT6311_LDO_CON3,\
> + .enable_mask = MT6311_PMIC_RG_VBIASN_EN_MASK,\
> +}
> +
> +static struct regulator_desc mt6311_regulators[] = {
> + MT6311_BUCK(VDVFS),
> + MT6311_LDO(VBIASN),
> +};
> +
> +/*
> + * I2C driver interface functions
> + */
> +static int mt6311_i2c_probe(struct i2c_client *i2c,
> + const struct i2c_device_id *id)
> +{
> + struct regulator_config config = { };
> + struct regulator_dev *rdev;
> + struct regmap *regmap;
> + int error, i, ret;
> + unsigned int data;
> +
> + regmap = devm_regmap_init_i2c(i2c, &mt6311_regmap_config);
> + if (IS_ERR(regmap)) {
> + error = PTR_ERR(regmap);
> + dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
> + error);
> + return error;
> + }
> +
> + ret = regmap_read(regmap, MT6311_SWCID, &data);
> + if (ret < 0) {
> + dev_err(&i2c->dev, "Failed to read DEVICE_ID reg: %d\n", ret);
> + return ret;
> + }
> +
> + switch (data) {
> + case MT6311_E1_CID_CODE:
> + case MT6311_E2_CID_CODE:
> + case MT6311_E3_CID_CODE:
> + break;
> + default:
> + dev_err(&i2c->dev, "Unsupported device id = 0x%x.\n", data);
> + return -ENODEV;
> + }
> +
> + for (i = 0; i < MT6311_MAX_REGULATORS; i++) {
> + config.dev = &i2c->dev;
> + config.regmap = regmap;
> +
> + rdev = devm_regulator_register(&i2c->dev,
> + &mt6311_regulators[i], &config);
> + if (IS_ERR(rdev)) {
> + dev_err(&i2c->dev,
> + "Failed to register MT6311 regulator\n");
> + return PTR_ERR(rdev);
> + }
> + }
> +
> + if (ret < 0)
> + dev_err(&i2c->dev, "Failed to initialize regulator: %d\n", ret);
> +
I don't think this is necessary, you are already adding logs for all
the error conditions.
> + return ret;
> +}
> +
> +static const struct i2c_device_id mt6311_i2c_id[] = {
> + {"mt6311", 0},
> + {},
> +};
> +MODULE_DEVICE_TABLE(i2c, mt6311_i2c_id);
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id mt6311_dt_ids[] = {
> + { .compatible = "mediatek,mt6311-regulator",
> + .data = &mt6311_i2c_id[0] },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, mt6311_dt_ids);
> +#endif
> +
> +static struct i2c_driver mt6311_regulator_driver = {
> + .driver = {
> + .name = "mt6311",
> + .owner = THIS_MODULE,
> + .of_match_table = of_match_ptr(mt6311_dt_ids),
of_match_ptr() is NULL when CONFIG_OF is not defined so you don't need
the additional #ifdef
CONFIG_OF around mt6311_dt_ids.
> + },
> + .probe = mt6311_i2c_probe,
> + .id_table = mt6311_i2c_id,
> +};
> +
> +module_i2c_driver(mt6311_regulator_driver);
> +
> +MODULE_AUTHOR("Henry Chen <henryc.chen at mediatek.com>");
> +MODULE_DESCRIPTION("Regulator device driver for Mediatek MT6311");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/regulator/mt6311-regulator.h b/drivers/regulator/mt6311-regulator.h
> new file mode 100644
> index 0000000..5218db4
> --- /dev/null
> +++ b/drivers/regulator/mt6311-regulator.h
> @@ -0,0 +1,65 @@
> +/*
> + * Copyright (c) 2015 MediaTek Inc.
> + * Author: Henry Chen <henryc.chen at mediatek.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef __MT6311_REGULATOR_H__
> +#define __MT6311_REGULATOR_H__
> +
> +#define MT6311_SWCID 0x01
> +
> +#define MT6311_TOP_INT_CON 0x18
> +#define MT6311_TOP_INT_MON 0x19
> +
> +#define MT6311_VDVFS11_CON0 0x87
> +#define MT6311_VDVFS11_CON7 0x88
> +#define MT6311_VDVFS11_CON8 0x89
> +#define MT6311_VDVFS11_CON9 0x8A
> +#define MT6311_VDVFS11_CON10 0x8B
> +#define MT6311_VDVFS11_CON11 0x8C
> +#define MT6311_VDVFS11_CON12 0x8D
> +#define MT6311_VDVFS11_CON13 0x8E
> +#define MT6311_VDVFS11_CON14 0x8F
> +#define MT6311_VDVFS11_CON15 0x90
> +#define MT6311_VDVFS11_CON16 0x91
> +#define MT6311_VDVFS11_CON17 0x92
> +#define MT6311_VDVFS11_CON18 0x93
> +#define MT6311_VDVFS11_CON19 0x94
> +
> +#define MT6311_LDO_CON0 0xCC
> +#define MT6311_LDO_OCFB0 0xCD
> +#define MT6311_LDO_CON2 0xCE
> +#define MT6311_LDO_CON3 0xCF
> +#define MT6311_LDO_CON4 0xD0
> +#define MT6311_FQMTR_CON0 0xD1
> +#define MT6311_FQMTR_CON1 0xD2
> +#define MT6311_FQMTR_CON2 0xD3
> +#define MT6311_FQMTR_CON3 0xD4
> +#define MT6311_FQMTR_CON4 0xD5
> +
> +#define MT6311_PMIC_RG_INT_POL_MASK 0x1
> +#define MT6311_PMIC_RG_INT_EN_MASK 0x2
> +#define MT6311_PMIC_RG_BUCK_OC_INT_STATUS_MASK 0x10
> +
> +#define MT6311_PMIC_VDVFS11_EN_CTRL_MASK 0x1
> +#define MT6311_PMIC_VDVFS11_VOSEL_CTRL_MASK 0x2
> +#define MT6311_PMIC_VDVFS11_EN_SEL_MASK 0x3
> +#define MT6311_PMIC_VDVFS11_VOSEL_SEL_MASK 0xc
> +#define MT6311_PMIC_VDVFS11_EN_MASK 0x1
> +#define MT6311_PMIC_VDVFS11_VOSEL_MASK 0x7F
> +#define MT6311_PMIC_VDVFS11_VOSEL_ON_MASK 0x7F
> +#define MT6311_PMIC_VDVFS11_VOSEL_SLEEP_MASK 0x7F
> +#define MT6311_PMIC_NI_VDVFS11_VOSEL_MASK 0x7F
> +
> +#define MT6311_PMIC_RG_VBIASN_EN_MASK 0x1
> +
> +#endif
> diff --git a/include/linux/regulator/mt6311.h b/include/linux/regulator/mt6311.h
> new file mode 100644
> index 0000000..8473259
> --- /dev/null
> +++ b/include/linux/regulator/mt6311.h
> @@ -0,0 +1,29 @@
> +/*
> + * Copyright (c) 2015 MediaTek Inc.
> + * Author: Henry Chen <henryc.chen at mediatek.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef __LINUX_REGULATOR_MT6311_H
> +#define __LINUX_REGULATOR_MT6311_H
> +
> +#define MT6311_MAX_REGULATORS 2
> +
> +enum {
> + MT6311_ID_VDVFS = 0,
> + MT6311_ID_VBIASN,
> +};
> +
> +#define MT6311_E1_CID_CODE 0x10
> +#define MT6311_E2_CID_CODE 0x20
> +#define MT6311_E3_CID_CODE 0x30
> +
> +#endif /* __LINUX_REGULATOR_MT6311_H */
> --
Besides those comments, it looks good to me now.
Reviewed-by: Javier Martinez Canillas <javier at osg.samsung.com>
Best regards,
Javier
More information about the Linux-mediatek
mailing list