[PATCH v3 1/2] dt-bindings: regulator: mt6311: Add document for mt6311 regulator

[Javier Martinez Canillas]

Hello Henry,

On Thu, Jul 23, 2015 at 5:39 AM, Henry Chen <henryc.chen at mediatek.com> wrote:
> This patch adds a list of supported regulator names to the devicetree
> binding documentation for Mediatek MT6311 PMIC.
>
> Signed-off-by: Henry Chen <henryc.chen at mediatek.com>
> ---
>  .../bindings/regulator/mt6311-regulator.txt        | 35 ++++++++++++++++++++++
>  1 file changed, 35 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/regulator/mt6311-regulator.txt
>
> diff --git a/Documentation/devicetree/bindings/regulator/mt6311-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6311-regulator.txt
> new file mode 100644
> index 0000000..9387d6d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/regulator/mt6311-regulator.txt
> @@ -0,0 +1,35 @@
> +Mediatek MT6311 Regulator Driver
> +
> +Required properties:
> +- compatible: "mediatek,mt6311-regulator"
> +- reg: I2C slave address, usually 0x6b.
> +- regulators: List of regulators provided by this controller. It is named
> +  to VDVFS and VBIASN.
> +  The definition for each of these nodes is defined using the standard binding
> +  for regulators at Documentation/devicetree/bindings/regulator/regulator.txt.
> +
> +The valid names for regulators are:
> +BUCK:
> +  VDVFS
> +LDO:
> +  VBIASN
> +
> +Example:

Sorry, I missed this in the previous revision but the ePAPR document
says "the name of a node should be somewhat generic, reflecting the
function of the device and not its precise programming model."

> +       pmic: mt6311 at 6B {

So this should be:

mt6311: pmic@

> +               compatible = "mediatek,mt6311-regulator";
> +               reg = <0x6B>;
> +
> +               regulators {
> +                       mt6311_vcpu_reg: VDVFS {
> +                               regulator-name = "VDVFS";
> +                               regulator-min-microvolt = < 600000>;
> +                               regulator-max-microvolt = <1400000>;
> +                               regulator-ramp-delay = <10000>;
> +                       };
> +                       mt6311_ldo_reg: VBIASN {
> +                               regulator-name = "VBIASN";
> +                               regulator-min-microvolt = <200000>;
> +                               regulator-max-microvolt = <800000>;
> +                       };
> +               };
> +       };
> --

Besides the comment above, it looks good to me.

Reviewed-by: Javier Martinez Canillas <javier at osg.samsung.com>

Best regards,
Javier