[PATCH 2/2] regulator: MT6311: Add support for MT6311 regulator

[Mark Brown]

On Mon, Jul 20, 2015 at 03:36:33PM +0800, Henry Chen wrote:

> @@ -460,6 +460,15 @@ config REGULATOR_MT6397
>  	  This driver supports the control of different power rails of device
>  	  through regulator interface.
>  
> +config REGULATOR_MT6311
> +	tristate "MediaTek MT6311 PMIC"

Please keep these files sorted, MT6311 should be before MT6397.

> +static struct mt6311_pdata *mt6311_parse_regulators_dt(
> +		struct device *dev)
> +{
> +	struct mt6311_pdata *pdata;
> +	struct device_node *node;
> +	int i, num, n;
> +
> +	node = of_get_child_by_name(dev->of_node, "regulators");
> +	if (!node) {
> +		dev_err(dev, "regulators node not found\n");
> +		return ERR_PTR(-ENODEV);
> +	}
> +
> +	num = of_regulator_match(dev, node, mt6311_matches,
> +				 ARRAY_SIZE(mt6311_matches));

Please convert this to use the modern method of specifying the regulator
DT bindings by providing of_match and regulators_node in the
regulator_desc so the core does the mapping for yand regulators_node in
the regulator_desc so the core does the mapping for yand regulators_node
in the regulator_desc so the core does the mapping for yand
regulators_node in the regulator_desc so the core does the mapping for
you and you can delete the DT handling code.

Otherwise this driver looks good.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 473 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-mediatek/attachments/20150720/2dd86787/attachment.sig>