[RESEND PATCH 1/6] Document: bindings: DT: Add SMP enable method for MT6580 SoC platform

[Yingjoe Chen]

On Mon, 2015-06-29 at 11:03 +0800, Yingjoe Chen wrote:
> On Fri, 2015-06-19 at 02:01 +0800, Scott Shu wrote:
> > For MT6580 SoC platform, the secondary cores are in powered off state
> > as default, so compared with MT65xx series SoC, one new enable method
> > is needed. This method using the SPM (System Power Manager) inside
> > the SCYSYS to control the CPU power.
> > ---
> >  Documentation/devicetree/bindings/arm/cpus.txt | 1 +
> >  1 file changed, 1 insertion(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
> > index ac2903d..fb80b2e 100644
> > --- a/Documentation/devicetree/bindings/arm/cpus.txt
> > +++ b/Documentation/devicetree/bindings/arm/cpus.txt
> > @@ -194,6 +194,7 @@ nodes to be present and contain the properties described below.
> >  			    "marvell,armada-380-smp"
> >  			    "marvell,armada-390-smp"
> >  			    "marvell,armada-xp-smp"
> > +			    "mediatek,mt6580-smp"
> >  			    "mediatek,mt65xx-smp"
> >  			    "mediatek,mt81xx-tz-smp"
> >  			    "qcom,gcc-msm8660"
> 
> Hi
> 
> It seems we have 3 different kinds of cpu enable method now, and
> mt65xx-smp doesn't cover all mt65xx series. So maybe it make sense to
> change naming before it got merged.
> 
> Short summary for these methods:
> 
> mt65xx-smp:    	For mt65xx socs which wakeup all cores at boot.
> 		Tested on mt6589 by Matthias.
> mt6580-smp:     Only first core is alive at boot, so need to wakeup
> 		other cores using SPM. AFAIK only for mt6580 now.
> mt81xx-tz-smp:  For soc which wakeup all cores at boot, and have
> 		trustzone firmware. Suitable for mt8127, mt8135.


Hi Matthias, Arnd,

Any suggestion on the naming? Is it ok if I just rename mt65xx-smp to
mt6589-smp since that's the only one we tested?

Joe.C