[PATCH v3 0/5] pinctrl: mediatek: add pinctrl/GPIO/EINT driver for mt2701
Biao Huang
biao.huang at mediatek.com
Sun Dec 27 23:09:01 PST 2015
Change in v3:
1. convert to arch_initcall.
2. set direction to input when do input-enable/disable and input-schmitt-enable/disable properties.
Change in v2:
1. add special pinmux setting for some pins.
2. fix mt2701 direction control issue.
3. resort dt-bindings.
Biao Huang (4):
dt-bindings: mediatek: Modify pinctrl bindings for mt2701
pinctrl: dt bindings: Add pinfunc header file for mt2701
pinctrl: mediatek: Add Pinctrl/GPIO/EINT driver for mt2701
arm: dts: Add pinctrl/GPIO/EINT node for mt2701
Erin Lo (1):
ARM: mediatek: Add MT2701 config options for mediatek SoCs.
.../devicetree/bindings/pinctrl/pinctrl-mt65xx.txt | 9 +-
arch/arm/boot/dts/mt2701-pinfunc.h | 735 +++++++
arch/arm/boot/dts/mt2701.dtsi | 19 +
arch/arm/mach-mediatek/Kconfig | 4 +
drivers/pinctrl/mediatek/Kconfig | 6 +
drivers/pinctrl/mediatek/Makefile | 1 +
drivers/pinctrl/mediatek/pinctrl-mt2701.c | 586 +++++
drivers/pinctrl/mediatek/pinctrl-mtk-common.c | 16 +
drivers/pinctrl/mediatek/pinctrl-mtk-common.h | 12 +-
drivers/pinctrl/mediatek/pinctrl-mtk-mt2701.h | 2323 ++++++++++++++++++++
10 files changed, 3706 insertions(+), 5 deletions(-)
create mode 100644 arch/arm/boot/dts/mt2701-pinfunc.h
create mode 100644 drivers/pinctrl/mediatek/pinctrl-mt2701.c
create mode 100644 drivers/pinctrl/mediatek/pinctrl-mtk-mt2701.h
--
1.7.9.5
More information about the Linux-mediatek
mailing list