[PATCH 3/4] arm64: dts: mediatek: Support SD/EMMC SDR104/HS200/HS400
Chaotian Jing
chaotian.jing at mediatek.com
Wed Aug 12 01:24:04 PDT 2015
Add 400Mhz source clock for EMMC HS400 mode
Support EMMC DDR50/HS200/HS400 of mt8173-evb
Support SD SDR25/SDR50/DDR50/SDR104 of mt8173-evb
Signed-off-by: Chaotian Jing <chaotian.jing at mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 10 ++++++++--
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 5 +++--
2 files changed, 11 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index 4be66ca..cd5317f 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -70,8 +70,11 @@
pinctrl-0 = <&mmc0_pins_default>;
pinctrl-1 = <&mmc0_pins_uhs>;
bus-width = <8>;
- max-frequency = <50000000>;
+ max-frequency = <200000000>;
cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
vmmc-supply = <&mt6397_vemc_3v3_reg>;
vqmmc-supply = <&mt6397_vio18_reg>;
non-removable;
@@ -83,9 +86,12 @@
pinctrl-0 = <&mmc1_pins_default>;
pinctrl-1 = <&mmc1_pins_uhs>;
bus-width = <4>;
- max-frequency = <50000000>;
+ max-frequency = <200000000>;
cap-sd-highspeed;
sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-ddr50;
+ sd-uhs-sdr104;
cd-gpios = <&pio 132 0>;
vmmc-supply = <&mt6397_vmch_reg>;
vqmmc-supply = <&mt6397_vmc_reg>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index d18ee42..495ed94 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -450,8 +450,9 @@
reg = <0 0x11230000 0 0x1000>;
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_LOW>;
clocks = <&pericfg CLK_PERI_MSDC30_0>,
- <&topckgen CLK_TOP_MSDC50_0_H_SEL>;
- clock-names = "source", "hclk";
+ <&topckgen CLK_TOP_MSDC50_0_H_SEL>,
+ <&topckgen CLK_TOP_MSDCPLL_D2>;
+ clock-names = "source", "hclk", "400Mhz_clk";
status = "disabled";
};
--
1.8.1.1.dirty
More information about the Linux-mediatek
mailing list