[PATCH 09/13] thermal: Allow sensor ops to fail with -ENOSYS

[Sascha Hauer]

The thermal core uses the existence of the .get_temp, .get_trend and
.set_emul_temp to detect whether this operation exists and should be
used or whether it should be emulated in software. This makes problems
for of-thermal which has to modify the struct thermal_zone_device_ops
during runtime whenever a sensor is registered or unregistered.

Let the core test for -ENOSYS from these callbacks and treat it like
if the callbacks were not present.

This allows of-thermal to always set the sensor related callbacks and
to make struct thermal_zone_device_ops const again.

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
 drivers/thermal/thermal_core.c | 24 +++++++++++++++++-------
 1 file changed, 17 insertions(+), 7 deletions(-)

diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index 81ebc24..0f3d26c 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -413,13 +413,16 @@ static void handle_thermal_trip(struct thermal_zone_device *tz, int trip)
  */
 int thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp)
 {
-	int ret = -EINVAL;
+	int ret;
 	int count;
 	int crit_temp = INT_MAX;
 	enum thermal_trip_type type;
 
-	if (!tz || IS_ERR(tz) || !tz->ops->get_temp)
-		goto exit;
+	if (!tz || IS_ERR(tz))
+		return -EINVAL;
+
+	if (!tz->ops->get_temp)
+		return -ENOSYS;
 
 	mutex_lock(&tz->lock);
 
@@ -445,7 +448,7 @@ int thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp)
 	}
 
 	mutex_unlock(&tz->lock);
-exit:
+
 	return ret;
 }
 EXPORT_SYMBOL_GPL(thermal_zone_get_temp);
@@ -454,10 +457,11 @@ void thermal_zone_device_update(struct thermal_zone_device *tz)
 {
 	int temp, ret, count;
 
-	if (!tz->ops->get_temp)
+	ret = thermal_zone_get_temp(tz, &temp);
+
+	if (ret == -ENOSYS)
 		return;
 
-	ret = thermal_zone_get_temp(tz, &temp);
 	if (ret) {
 		if (ret != -EAGAIN)
 			dev_warn(&tz->device,
@@ -783,10 +787,16 @@ emul_temp_store(struct device *dev, struct device_attribute *attr,
 	if (kstrtoul(buf, 10, &temperature))
 		return -EINVAL;
 
-	if (!tz->ops->set_emul_temp) {
+	if (tz->ops->set_emul_temp)
+		ret = tz->ops->set_emul_temp(tz, temperature);
+	else
+		ret = -ENOSYS;
+
+	if (ret == -ENOSYS) {
 		mutex_lock(&tz->lock);
 		tz->emul_temperature = temperature;
 		mutex_unlock(&tz->lock);
+		ret = 0;
 	} else {
 		ret = tz->ops->set_emul_temp(tz, temperature);
 	}
-- 
2.1.4