Re: 答复: [PATCH v2 2/5] mmc: mediatek: Add Mediatek MMC driver
Ulf Hansson
ulf.hansson at linaro.org
Wed Apr 8 03:38:56 PDT 2015
[...]
>> > +
>> > +struct mt_bdma_desc {
>> > + u32 first_u32;
>> > +#define BDMA_DESC_EOL (1 << 0)
>> > +#define BDMA_DESC_CHECKSUM (0xff << 8) /* bit8 ~ bit15 */
>> > +#define BDMA_DESC_BLKPAD (1 << 17)
>> > +#define BDMA_DESC_DWPAD (1 << 18)
>> > + u32 next;
>> > + u32 ptr;
>> > + u32 second_u32;
>> > +#define BDMA_DESC_BUFLEN (0xffff) /* bit0 ~ bit15 */
>> > +};
>> > +
>> > +struct msdc_dma {
>> > + struct scatterlist *sg; /* I/O scatter list */
>> > + struct mt_gpdma_desc *gpd; /* pointer to gpd
>> array */
>> > + struct mt_bdma_desc *bd; /* pointer to bd
>> array */
>> > + dma_addr_t gpd_addr; /* the physical address of gpd array */
>> > + dma_addr_t bd_addr; /* the physical address of bd array */
>> > +};
>>
>> This looks weird from DMA perspective. Can you elaborate on why you
>> can't use the dmaengine API?
>>
> The gpd and bd structure are determined by the MSDC hw, and, the DMA controller is a part of the MSDC hw, different with the chain dma implemented by the kernel.
Hmm. I haven't reviewed the DMA related parts in detail. I will do
that when you have sent the next version.
>> > +
>> > +struct msdc_host {
>> > + struct device *dev;
>> > + struct mmc_host *mmc; /* mmc structure */
>> > + int cmd_rsp;
>> > +
>> > + spinlock_t lock;
>> > + struct mmc_request *mrq;
>> > + struct mmc_command *cmd;
>> > + struct mmc_data *data;
>> > + int error;
>> > +
>> > + void __iomem *base; /* host base address */
>> > +
>> > + struct msdc_dma dma; /* dma channel */
>> > +
>> > + u32 timeout_ns; /* data timeout ns */
>> > + u32 timeout_clks; /* data timeout clks */
>> > +
>> > + struct pinctrl *pinctrl;
>> > + struct pinctrl_state *pins_default;
>> > + struct pinctrl_state *pins_uhs;
>> > + struct delayed_work req_timeout;
>> > + int irq; /* host interrupt */
>> > +
>> > + struct clk *src_clk; /* msdc source clock */
>> > + u32 mclk; /* mmc subsystem clock */
>> > + u32 hclk; /* host clock speed */
>> > + u32 sclk; /* SD/MS clock speed */
>> > + bool ddr;
>> > +};
>> > +
>> > +static void sdr_set_bits(void __iomem *reg, u32 bs)
>> > +{
>> > + u32 val = readl(reg);
>> > +
>> > + val |= bs;
>> > + writel(val, reg);
>> > +}
>> > +
>> > +static void sdr_clr_bits(void __iomem *reg, u32 bs)
>> > +{
>> > + u32 val = readl(reg);
>> > +
>> > + val &= ~(u32)bs;
>> > + writel(val, reg);
>> > +}
>> > +
>> > +static void sdr_set_field(void __iomem *reg, u32 field, u32 val)
>> > +{
>> > + unsigned int tv = readl(reg);
>> > +
>> > + tv &= ~field;
>> > + tv |= ((val) << (ffs((unsigned int)field) - 1));
>> > + writel(tv, reg);
>> > +}
>>
>> A common thought for all the three above functions:
>>
>> Have you considered using a cache variable for those registers that
>> often gets updated? In that way you would have to read the register
>> value every time when you want to write to it. It should improve
>> performance a bit.
>>
> These register can be modified by the MSDC hw, cannot cache it.
Is that true for all registers?
Anyway, let's leave this as is.
>> > +
>> > +static void sdr_get_field(void __iomem *reg, u32 field, u32 *val)
>> > +{
>> > + unsigned int tv = readl(reg);
>> > +
>> > + *val = ((tv & field) >> (ffs((unsigned int)field) - 1));
>> > +}
>> > +
>> > +static void msdc_reset_hw(struct msdc_host *host)
>> > +{
>> > + u32 val;
>> > +
>> > + sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_RST);
>> > + while (readl(host->base + MSDC_CFG) & MSDC_CFG_RST)
>> > + cpu_relax();
>> > +
>> > + sdr_set_bits(host->base + MSDC_FIFOCS, MSDC_FIFOCS_CLR);
>> > + while (readl(host->base + MSDC_FIFOCS) & MSDC_FIFOCS_CLR)
>> > + cpu_relax();
>> > +
>> > + val = readl(host->base + MSDC_INT);
>> > + writel(val, host->base + MSDC_INT);
>> > +}
>> > +
>> > +static void msdc_cmd_next(struct msdc_host *host,
>> > + struct mmc_request *mrq, struct mmc_command *cmd);
>>
>> Please investigate whether you can move around the code to prevent
>> this static declaration of the function.
>>
> It is hard to do it, because the first cmd may be CMD23, and do the next is send the mrq->cmd, so, there is a loop here, at least on method need do static declaration,
Okay.
[...]
>> > +/* clock control primitives */
>> > +static void msdc_set_timeout(struct msdc_host *host, u32 ns, u32 clks)
>> > +{
>> > + u32 timeout, clk_ns;
>> > + u32 mode = 0;
>> > +
>> > + host->timeout_ns = ns;
>> > + host->timeout_clks = clks;
>> > + if (host->sclk == 0) {
>> > + timeout = 0;
>> > + } else {
>> > + clk_ns = 1000000000UL / host->sclk;
>> > + timeout = (ns + clk_ns - 1) / clk_ns + clks;
>> > + /* in 1048576 sclk cycle unit */
>> > + timeout = (timeout + (1 << 20) - 1) >> 20;
>> > + sdr_get_field(host->base + MSDC_CFG,
>> MSDC_CFG_CKMOD, &mode);
>> > + /*DDR mode will double the clk cycles for data timeout */
>>
>> How do you know you will be using DDR at this point? Don't you need to
>> check for that?
>>
> The MSDC_CFG_CKMODE can show current mode(DDR or SDR).
Ah, thanks. Got it.
[...]
>> > +static void msdc_request_done(struct msdc_host *host, struct
>> mmc_request *mrq)
>> > +{
>> > + unsigned long flags;
>> > +
>> > + spin_lock_irqsave(&host->lock, flags);
>> > + cancel_delayed_work(&host->req_timeout);
>>
>> This looks racy.
>>
>> Don't you need a cancel_delayed_work_sync() from somewhere, to be sure
>> that work isn't preemted after the "host->mrq" has been reset here? Or
>> maybe there is another way!? Of course that can't be done with the
>> spin_locks held, but I asume you get my point.
> Yes, I get your point, actually, we set a 5s timeout for each request, and, if the work already pending(means that some error happens), we do not wait it,
> And the work will set the event to timeout and return,
> So, maybe a good solution is that need check the return value of the cancel_delayed_work(), if it is pending, directly return, and do not set the host->mrq to 0 to avoid the race condition,
That should work.
[...]
>>
>> "ocr_avail" should be fetched from the vmmc regulator, when you invoke
>> mmc_regulator_get_supply() above.
> Yes, I also want to remove it, but, Not all devices use regulator, our SDIO device which connected on MSDC3, it's power is controlled by gpio.
> This because the regulator of the PMU is not enough.
So could you perhaps use a "gpio regulator" for this GPIO pin? There
is already support to easily describe such in DT.
Or it is a "reset GPIO" you are talking about?
[...]
Kind regards
Uffe
More information about the Linux-mediatek
mailing list