[PATCH v8 3/7] dt-bindings: i3c: Add NXP P3H2x4x i3c-hub support

[Rob Herring]

On Mon, Mar 23, 2026 at 11:57:33AM +0530, Lakshay Piplani wrote:
> From: Aman Kumar Pandey <aman.kumarpandey at nxp.com>
> 
> Add bindings for the NXP P3H2x4x (P3H2440/P3H2441/P3H2840/P3H2841)
> multiport I3C hub family. These devices connect to a host via
> I3C/I2C/SMBus and allow communication with multiple downstream
> peripherals.
> 
> Signed-off-by: Aman Kumar Pandey <aman.kumarpandey at nxp.com>
> Signed-off-by: Vikash Bansal <vikash.bansal at nxp.com>

All these patches need your S-o-b tag. 

> 
> ---
> Changes in v8:
>  - Add compatible in i3c example
> 
> Changes in v7:
>  - Fix schema validation issues
>  - Adjust required properties
>  - Add I2C example
> 
> Changes in v6:
>  - Use a vendor prefix for the attributes
> 
> Changes in v5:
>  - Removed SW properties: cp0-ldo-microvolt,cp1-ldo-microvolt,
>    tp0145-ldo-microvolt, tp2367-ldo-microvolt
>  - Changed supply entries and its descriptions
> 
> Changes in v4:
>  - Fixed DT binding check warning
>  - Removed SW properties: ibi-enable, local-dev, and always-enable
> 
> Changes in v3:
>  - Added MFD (Multi-Function Device) support for I3C hub and on-die regulator
>  - Added Regulator supply node
> 
> Changes in v2:
>  - Fixed DT binding check warning
>  - Revised logic for parsing DTS nodes
> ---
> ---
>  .../devicetree/bindings/i3c/nxp,p3h2840.yaml  | 304 ++++++++++++++++++
>  MAINTAINERS                                   |   8 +
>  2 files changed, 312 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/i3c/nxp,p3h2840.yaml
> 
> diff --git a/Documentation/devicetree/bindings/i3c/nxp,p3h2840.yaml b/Documentation/devicetree/bindings/i3c/nxp,p3h2840.yaml
> new file mode 100644
> index 000000000000..f588fd8318a0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i3c/nxp,p3h2840.yaml
> @@ -0,0 +1,304 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright 2025 NXP
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/i3c/nxp,p3h2840.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP P3H2X4X I3C HUB
> +
> +maintainers:
> +  - Aman Kumar Pandey <aman.kumarpandey at nxp.com>
> +  - Vikash Bansal <vikash.bansal at nxp.com>
> +
> +description: |
> +  P3H2x4x (P3H2440/P3H2441/P3H2840/P3H2841) is a family of multiport I3C
> +  hub devices that connect to:-
> +  1. A host CPU via I3C/I2C/SMBus bus on upstream side and connect to multiple
> +     peripheral devices on the downstream  side.
> +  2. Have two Controller Ports which can support either
> +     I2C/SMBus or I3C buses and connect to a CPU, BMC or SOC.
> +  3. P3H2840/ P3H2841 are 8 port I3C hub with eight I3C/I2C Target Port.
> +  4. P3H2440/ P3H2441 are 4 port I3C hub with four I3C/I2C Target Port.
> +     Target ports can be configured as I2C/SMBus, I3C or GPIO and connect to
> +     peripherals.
> +
> +properties:
> +  compatible:
> +    const: nxp,p3h2840
> +
> +  reg:
> +    maxItems: 1
> +
> +  '#address-cells':
> +    const: 1
> +
> +  '#size-cells':
> +    const: 0
> +
> +  assigned-address:
> +    maximum: 0x7f
> +
> +  nxp,tp0145-pullup-ohms:
> +    description:
> +      Selects the pull up resistance for target Port 0/1/4/5, in ohms.
> +    enum: [250, 500, 1000, 2000]
> +    default: 500
> +
> +  nxp,tp2367-pullup-ohms:
> +    description:
> +      Selects the pull up resistance for target Port 2/3/6/7, in ohms.
> +    enum: [250, 500, 1000, 2000]
> +    default: 500
> +
> +  nxp,cp0-io-strength-ohms:
> +    description:
> +      Selects the IO drive strength for controller Port 0, in ohms.
> +    enum: [20, 30, 40, 50]
> +    default: 20
> +
> +  nxp,cp1-io-strength-ohms:
> +    description:
> +      Selects the IO drive strength for controller Port 1, in ohms.
> +    enum: [20, 30, 40, 50]
> +    default: 20
> +
> +  nxp,tp0145-io-strength-ohms:
> +    description:
> +      Selects the IO drive strength for target port 0/1/4/5, in ohms.
> +    enum: [20, 30, 40, 50]
> +    default: 20
> +
> +  nxp,tp2367-io-strength-ohms:
> +    description:
> +      Selects the IO drive strength for target port 2/3/6/7, in ohms.
> +    enum: [20, 30, 40, 50]
> +    default: 20
> +
> +  vcc1-supply:
> +    description: Controller port 0 power supply.
> +
> +  vcc2-supply:
> +    description: Controller port 1 power supply.
> +
> +  vcc3-supply:
> +    description: Target port 0/1/4/5 power supply.
> +
> +  vcc4-supply:
> +    description: Target port 2/3/6/7 power supply.
> +
> +  regulators:
> +    type: object
> +    additionalProperties: false
> +
> +    properties:
> +      ldo-cp0:
> +        type: object
> +        $ref: /schemas/regulator/regulator.yaml#
> +        unevaluatedProperties: false
> +
> +      ldo-cp1:
> +        type: object
> +        $ref: /schemas/regulator/regulator.yaml#
> +        unevaluatedProperties: false
> +
> +      ldo-tpg0:
> +        type: object
> +        $ref: /schemas/regulator/regulator.yaml#
> +        unevaluatedProperties: false
> +
> +      ldo-tpg1:
> +        type: object
> +        $ref: /schemas/regulator/regulator.yaml#
> +        unevaluatedProperties: false
> +
> +required:
> +  - reg
> +
> +patternProperties:
> +  "^i3c@[0-7]$":
> +    type: object
> +    unevaluatedProperties: false

This is a child I3C bus, right? You don't support any devices on the 
bus. You need a $ref to i3c.yaml.

> +
> +    properties:
> +      reg:
> +        description:
> +          The I3C HUB Target Port number.
> +        maximum: 7
> +

> +      '#address-cells':
> +        const: 3
> +
> +      '#size-cells':
> +        const: 0

Then these 2 can be dropped.

> +
> +      nxp,pullup-enable:
> +        type: boolean
> +        description:
> +          Enables the on-die pull-up for Target Port.
> +
> +    required:
> +      - reg
> +      - "#address-cells"
> +      - "#size-cells"

And these 2.

> +
> +  "^(i2c|smbus)@[0-7]$":
> +    type: object
> +    unevaluatedProperties: false

Likewise, you need a reference to i2c-controller.yaml.

Rob