[PATCH v2 04/17] i3c: renesas: Reconfigure the DATBAS register on re-attach

Claudiu Beznea claudiu.beznea at kernel.org
Tue Jun 2 06:28:11 PDT 2026


From: Claudiu Beznea <claudiu.beznea.uj at bp.renesas.com>

During re-attach, the device may change its position in the i3c->addrs[]
array. As a result, it may use a different Device Address Table Basic
Register (DATBAS), which needs to be reconfigured.

Reconfigure the DATBAS register on re-attach. Along with it update
software caches.

Fixes: d028219a9f14 ("i3c: master: Add basic driver for the Renesas I3C controller")
Cc: stable at vger.kernel.org
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj at bp.renesas.com>
---

Changes in v2:
- dropped the "if (pos < 0)" check in renesas_i3c_reattach_i3c_dev() to allow
  re-attaching in case of a full bus; along with it the condition to update
  the DATBAS register and software caches was updated to
  if (data->index != pos && pos >= 0)
- adjusted the patch title

 drivers/i3c/master/renesas-i3c.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/i3c/master/renesas-i3c.c b/drivers/i3c/master/renesas-i3c.c
index 4c86e7257804..76a4831098c9 100644
--- a/drivers/i3c/master/renesas-i3c.c
+++ b/drivers/i3c/master/renesas-i3c.c
@@ -892,10 +892,26 @@ static int renesas_i3c_reattach_i3c_dev(struct i3c_dev_desc *dev,
 	struct i3c_master_controller *m = i3c_dev_get_master(dev);
 	struct renesas_i3c *i3c = to_renesas_i3c(m);
 	struct renesas_i3c_i2c_dev_data *data = i3c_dev_get_master_data(dev);
+	int pos;
+
+	pos = renesas_i3c_get_free_pos(i3c);
+
+	if (data->index != pos && pos >= 0) {
+		renesas_writel(i3c->regs, DATBAS(data->index), 0);
+		i3c->addrs[data->index] = 0;
+		i3c->free_pos |= BIT(data->index);
+
+		data->index = pos;
+		i3c->free_pos &= ~BIT(data->index);
+	}
 
 	i3c->addrs[data->index] = dev->info.dyn_addr ? dev->info.dyn_addr :
 							dev->info.static_addr;
 
+	renesas_writel(i3c->regs, DATBAS(data->index),
+		       DATBAS_DVSTAD(dev->info.static_addr) |
+		       datbas_dvdyad_with_parity(i3c->addrs[data->index]));
+
 	return 0;
 }
 
-- 
2.43.0




More information about the linux-i3c mailing list