[PATCH v6 02/12] i3c: master: Use unified device property interface

[Adrian Hunter]

On 21/07/2026 07:07, Akhil R wrote:
> Replace all OF-specific functions with unified device property functions
> as a prerequisite to support both ACPI and device tree.
> 
> Reviewed-by: Frank Li <Frank.Li at nxp.com>
> Signed-off-by: Akhil R <akhilrajeev at nvidia.com>
> ---
>  drivers/i3c/master.c       | 77 +++++++++++++++++++++-----------------
>  include/linux/i3c/master.h |  5 ++-
>  2 files changed, 46 insertions(+), 36 deletions(-)
> 
> diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c
> index f1be38a640ca..4b3d9628bc39 100644
> --- a/drivers/i3c/master.c
> +++ b/drivers/i3c/master.c
> @@ -13,10 +13,12 @@
>  #include <linux/dma-mapping.h>
>  #include <linux/err.h>
>  #include <linux/export.h>
> +#include <linux/i2c.h>
>  #include <linux/kernel.h>
>  #include <linux/list.h>
>  #include <linux/of.h>
>  #include <linux/pm_runtime.h>
> +#include <linux/property.h>
>  #include <linux/slab.h>
>  #include <linux/spinlock.h>
>  #include <linux/workqueue.h>
> @@ -491,7 +493,7 @@ static void i3c_bus_cleanup(struct i3c_bus *i3cbus)
>  	mutex_unlock(&i3c_core_lock);
>  }
>  
> -static int i3c_bus_init(struct i3c_bus *i3cbus, struct device_node *np)
> +static int i3c_bus_init(struct i3c_bus *i3cbus, struct fwnode_handle *fwnode)
>  {
>  	int ret, start, end, id = -1;
>  
> @@ -501,8 +503,8 @@ static int i3c_bus_init(struct i3c_bus *i3cbus, struct device_node *np)
>  	i3c_bus_init_addrslots(i3cbus);
>  	i3cbus->mode = I3C_BUS_MODE_PURE;
>  
> -	if (np)
> -		id = of_alias_get_id(np, "i3c");
> +	if (fwnode && is_of_node(fwnode))
> +		id = of_alias_get_id(to_of_node(fwnode), "i3c");
>  
>  	mutex_lock(&i3c_core_lock);
>  	if (id >= 0) {
> @@ -837,7 +839,7 @@ static void i3c_masterdev_release(struct device *dev)
>  	WARN_ON(!list_empty(&bus->devs.i2c) || !list_empty(&bus->devs.i3c));
>  	i3c_bus_cleanup(bus);
>  
> -	of_node_put(dev->of_node);
> +	fwnode_handle_put(dev->fwnode);
>  }
>  
>  static const struct device_type i3c_masterdev_type = {
> @@ -1044,7 +1046,7 @@ static void i3c_device_release(struct device *dev)
>  
>  	WARN_ON(i3cdev->desc);
>  
> -	of_node_put(i3cdev->dev.of_node);
> +	fwnode_handle_put(dev->fwnode);
>  	kfree(i3cdev);
>  }
>  
> @@ -1928,7 +1930,7 @@ i3c_master_register_new_i3c_devs(struct i3c_master_controller *master)
>  			     desc->info.pid);
>  
>  		if (desc->boardinfo)
> -			desc->dev->dev.of_node = desc->boardinfo->of_node;
> +			device_set_node(&desc->dev->dev, desc->boardinfo->fwnode);

i3c_device_release() "puts" the node so there should be a "get" here.
Should probably fix that before switching to device properties.

Also seems like the of_node_get() for boardinfo for both i3c and i2c
has no balancing put.  Again, it would be good to get that sorted out
before switching to device properties.