[PATCH v13 2/7] dt-bindings: i3c: Add NXP P3H2x4x i3c-hub support

[sashiko-bot at kernel.org]

Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:
- [Medium] The device tree binding advertises GPIO capabilities in the hardware description but omits the required GPIO controller properties from the schema.
- [Medium] The binding schema fails to include compatible strings for all hardware variants claimed in the commit message.
--

commit 02eaa0b7ff6f65192cd318d6704be98b321762da
Author: Aman Kumar Pandey <aman.kumarpandey at nxp.com>

dt-bindings: i3c: Add NXP P3H2x4x i3c-hub support

Add bindings for the NXP P3H2x4x (P3H2440/P3H2441/P3H2840/P3H2841)
multiport I3C hub family.

> diff --git a/Documentation/devicetree/bindings/i3c/nxp,p3h2840.yaml b/Documentation/devicetree/bindings/i3c/nxp,p3h2840.yaml
> new file mode 100644
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i3c/nxp,p3h2840.yaml
[ ... ]
> +description: |
> +  P3H2x4x (P3H2440/P3H2441/P3H2840/P3H2841) is a family of multiport I3C
> +  hub devices that connect to:-
> +  1. A host CPU via I3C/I2C/SMBus bus on upstream side and connect to multiple
> +     peripheral devices on the downstream  side.
> +  2. Have two Controller Ports which can support either
> +     I2C/SMBus or I3C buses and connect to a CPU, BMC or SOC.
> +  3. P3H2840/ P3H2841 are 8 port I3C hub with eight I3C/I2C Target Port.
> +  4. P3H2440/ P3H2441 are 4 port I3C hub with four I3C/I2C Target Port.
> +     Target ports can be configured as I2C/SMBus, I3C or GPIO and connect to
> +     peripherals.

[Severity: Medium]
The description states that target ports can be configured as GPIO.
Since unevaluatedProperties is set to false, shouldn't this schema include the
standard GPIO provider properties (like gpio-controller and #gpio-cells)
so device trees can actually configure and utilize the advertised GPIO
capabilities without triggering validation errors?

> +
> +properties:
> +  compatible:
> +    const: nxp,p3h2840

[Severity: Medium]
The commit message and schema description indicate support for the P3H2x4x
family, including the P3H2440, P3H2441, and P3H2841. Does this compatible block
need to be expanded from a const constraint to an enum to allow strings for
those other variants?

Also, if the 4-port variants are added, would they require different schema
constraints, such as a maximum port reg of 3 rather than 7 for the
patternProperties?

[ ... ]

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260701065755.2067793-1-lakshay.piplani@nxp.com?part=2