[PATCH V3 3/3] i3c: mipi-i3c-hci-pci: Add System Suspend support

[Adrian Hunter]

Assign the driver PM operations pointer, which is necessary for the PCI
subsystem to put the device into a low power state.  Refer to
pci_pm_suspend_noirq() which bails out if the pointer is NULL, before
it has the opportunity to call pci_prepare_to_sleep().

No other actions are necessary as the mipi-i3c-hci driver takes care of
controller state.

Signed-off-by: Adrian Hunter <adrian.hunter at intel.com>
Reviewed-by: Frank Li <Frank.Li at nxp.com>
---


Changes in V3:

	Add Frank's Rev'd-by

Changes in V2:

	None


 drivers/i3c/master/mipi-i3c-hci/mipi-i3c-hci-pci.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/i3c/master/mipi-i3c-hci/mipi-i3c-hci-pci.c b/drivers/i3c/master/mipi-i3c-hci/mipi-i3c-hci-pci.c
index 1b38771667e5..0f05a15c14c7 100644
--- a/drivers/i3c/master/mipi-i3c-hci/mipi-i3c-hci-pci.c
+++ b/drivers/i3c/master/mipi-i3c-hci/mipi-i3c-hci-pci.c
@@ -320,6 +320,10 @@ static void mipi_i3c_hci_pci_remove(struct pci_dev *pci)
 	mfd_remove_devices(&pci->dev);
 }
 
+/* PM ops must exist for PCI to put a device to a low power state */
+static const struct dev_pm_ops mipi_i3c_hci_pci_pm_ops = {
+};
+
 static const struct pci_device_id mipi_i3c_hci_pci_devices[] = {
 	/* Wildcat Lake-U */
 	{ PCI_VDEVICE(INTEL, 0x4d7c), (kernel_ulong_t)&intel_mi_1_info},
@@ -342,6 +346,9 @@ static struct pci_driver mipi_i3c_hci_pci_driver = {
 	.id_table = mipi_i3c_hci_pci_devices,
 	.probe = mipi_i3c_hci_pci_probe,
 	.remove = mipi_i3c_hci_pci_remove,
+	.driver = {
+		.pm = pm_ptr(&mipi_i3c_hci_pci_pm_ops)
+	},
 };
 
 module_pci_driver(mipi_i3c_hci_pci_driver);
-- 
2.51.0