[PATCH] i3c, iio: fix i3c driver dependencies

[Arnd Bergmann]

From: Arnd Bergmann <arnd at arndb.de>

All combined i2c/i3c drivers appear to suffer from the same link
time problem when CONFIG_I3C is set to 'm':

arm-linux-gnueabi-ld: drivers/iio/magnetometer/mmc5633.o: in function `mmc5633_i3c_driver_init':
mmc5633.c:(.init.text+0x30): undefined reference to `i3c_driver_register_with_owner'

This was previously fixed several times by marking individual
drivers as 'depends on I2C; depends on I3C || !I3C', but this gets
tedious and is somewhat confusing.

Add a Kconfig symbol 'I3C_OR_I2C' to help replace those dependencies,
and use this in all the existing drivers that had already fixed it
as well as the new mmc5633 driver.

Fixes: 6e5f6bf2e3f0 ("iio: magnetometer: Add mmc5633 sensor")
Signed-off-by: Arnd Bergmann <arnd at arndb.de>
---
 drivers/hwmon/Kconfig            | 17 ++---------------
 drivers/i3c/Kconfig              | 12 ++++++++++++
 drivers/iio/magnetometer/Kconfig |  2 +-
 drivers/misc/amd-sbi/Kconfig     |  3 +--
 4 files changed, 16 insertions(+), 18 deletions(-)

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 41c381764c2b..1ddb3f73fdc0 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1493,8 +1493,7 @@ config SENSORS_LM73
 
 config SENSORS_LM75
 	tristate "National Semiconductor LM75 and compatibles"
-	depends on I2C
-	depends on I3C || !I3C
+	depends on I3C_OR_I2C
 	select REGMAP_I2C
 	select REGMAP_I3C if I3C
 	help
@@ -2381,19 +2380,7 @@ config SENSORS_TMP102
 
 config SENSORS_TMP103
 	tristate "Texas Instruments TMP103"
-	depends on I2C
-	select REGMAP_I2C
-	help
-	  If you say yes here you get support for Texas Instruments TMP103
-	  sensor chips.
-
-	  This driver can also be built as a module. If so, the module
-	  will be called tmp103.
-
-config SENSORS_TMP108
-	tristate "Texas Instruments TMP108"
-	depends on I2C
-	depends on I3C || !I3C
+	depends on I3C_OR_I2C
 	select REGMAP_I2C
 	select REGMAP_I3C if I3C
 	help
diff --git a/drivers/i3c/Kconfig b/drivers/i3c/Kconfig
index 30a441506f61..626c54b386d5 100644
--- a/drivers/i3c/Kconfig
+++ b/drivers/i3c/Kconfig
@@ -22,3 +22,15 @@ menuconfig I3C
 if I3C
 source "drivers/i3c/master/Kconfig"
 endif # I3C
+
+config I3C_OR_I2C
+	tristate
+	default m if I3C=m
+	default I2C
+	help
+	  Device drivers using module_i3c_i2c_driver() can use either
+	  i2c or i3c hosts, but cannot be built-in for the kernel when
+	  CONFIG_I3C=m.
+
+	  Add 'depends on I2C_OR_I3C' in Kconfig for those drivers to
+	  get the correct dependencies.
diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig
index 2b81b22c9550..448fef4e5716 100644
--- a/drivers/iio/magnetometer/Kconfig
+++ b/drivers/iio/magnetometer/Kconfig
@@ -143,7 +143,7 @@ config MMC5633
 	tristate "MEMSIC MMC5633 3-axis magnetic sensor"
 	select REGMAP_I2C if I2C
 	select REGMAP_I3C if I3C
-	depends on I2C || I3C
+	depends on I3C_OR_I2C
 	help
 	  Say yes here to build support for the MEMSIC MMC5633 3-axis
 	  magnetic sensor.
diff --git a/drivers/misc/amd-sbi/Kconfig b/drivers/misc/amd-sbi/Kconfig
index be022c71a90c..30e7fad7356c 100644
--- a/drivers/misc/amd-sbi/Kconfig
+++ b/drivers/misc/amd-sbi/Kconfig
@@ -1,10 +1,9 @@
 # SPDX-License-Identifier: GPL-2.0-only
 config AMD_SBRMI_I2C
 	tristate "AMD side band RMI support"
-	depends on I2C
+	depends on I3C_OR_I2C
 	depends on ARM || ARM64 || COMPILE_TEST
 	select REGMAP_I2C
-	depends on I3C || !I3C
 	select REGMAP_I3C if I3C
 	help
 	  Side band RMI over I2C/I3C support for AMD out of band management.
-- 
2.39.5