[PATCH] i3c: dw: reduce do_daa time if there's no client

[Jisheng Zhang]

If there's no client, wait for completion will timeout, then there's no
need to add i3c dev at all. This can save boot time by ~6s if there's
no client connected to the i3c interface.

Signed-off-by: Jisheng Zhang <jszhang at kernel.org>
---
 drivers/i3c/master/dw-i3c-master.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/i3c/master/dw-i3c-master.c b/drivers/i3c/master/dw-i3c-master.c
index 0625587f1527..18ebf304029a 100644
--- a/drivers/i3c/master/dw-i3c-master.c
+++ b/drivers/i3c/master/dw-i3c-master.c
@@ -885,8 +885,10 @@ static int dw_i3c_master_daa(struct i3c_master_controller *m)
 		      COMMAND_PORT_ROC;
 
 	dw_i3c_master_enqueue_xfer(master, xfer);
-	if (!wait_for_completion_timeout(&xfer->comp, XFER_TIMEOUT))
+	if (!wait_for_completion_timeout(&xfer->comp, XFER_TIMEOUT)) {
 		dw_i3c_master_dequeue_xfer(master, xfer);
+		goto rpm_out;
+	}
 
 	newdevs = GENMASK(master->maxdevs - cmd->rx_len - 1, 0);
 	newdevs &= ~olddevs;
-- 
2.53.0