[PATCH 0/4] Add Microchip I3C controller
Conor Dooley
conor at kernel.org
Tue Sep 9 12:46:51 PDT 2025
On Tue, Sep 09, 2025 at 04:43:29PM +0530, Durai Manickam KR wrote:
> Add support for microchip SAMA7D65 I3C HCI master only IP. This
> hardware is an instance of the MIPI I3C HCI Controller implementing
> version 1.0 specification. This driver adds platform-specific
> support for SAMA7D65 SoC.
>
> I3C in master mode supports up to 12.5MHz, SDR mode data transfer in
> mixed bus mode (I2C and I3C target devices on same i3c bus). It also
> supports IBI mechanism.
>
> Features tested and supported :
> Standard CCC commands.
> I3C SDR mode private transfers in PIO mode.
> I2C transfers in PIO mode.
> Pure bus mode and mixed bus mode.
>
> Testing done:
> With this patch we are able to fully configure the lsm6dso I3C slave
> device. Unlike I2C, I hope there is no linux utility to check the
> various transactions supported in the host controller. These features
> will be added later on this driver after testing (probably with I3C
> analyser KIT).
>
> Durai Manickam KR (4):
> clk: at91: sama7d65: add peripheral clock for I3C
> i3c: master: add Microchip SAMA7D65 I3C HCI master driver
> ARM: configs: at91: sama7: Add SAMA7D65 I3C HCI master
> ARM: dts: microchip: add I3C controller
>
> arch/arm/boot/dts/microchip/sama7d65.dtsi | 12 +
> arch/arm/configs/sama7_defconfig | 2 +
> drivers/clk/at91/sama7d65.c | 5 +-
> drivers/i3c/master/Kconfig | 14 +
> drivers/i3c/master/Makefile | 1 +
> drivers/i3c/master/sama7d65-i3c-hci-master.c | 2705 ++++++++++++++++++
> 6 files changed, 2737 insertions(+), 2 deletions(-)
> create mode 100644 drivers/i3c/master/sama7d65-i3c-hci-master.c
Where is your dt-binding?
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-i3c/attachments/20250909/a803ebc5/attachment-0001.sig>
More information about the linux-i3c
mailing list