[PATCH] i3c: Fix default I2C adapter timeout value

[Jarkko Nikula]

On 9/4/25 5:17 PM, Wolfram Sang wrote:
> On Thu, Sep 04, 2025 at 03:42:26PM +0300, Jarkko Nikula wrote:
>> Commit 3a379bbcea0a ("i3c: Add core I3C infrastructure") set the default
>> adapter timeout for I2C transfers as 1000 (ms). However that parameter
>> is defined in jiffies not in milliseconds.
>>
>> With mipi-i3c-hci driver this wasn't visible until commit c0a90eb55a69
>> ("i3c: mipi-i3c-hci: use adapter timeout value for I2C transfers").
>>
>> Fix this by setting the default timeout as HZ (CONFIG_HZ) not 1000.
>>
>> Fixes: 1b84691e7870 ("i3c: dw: use adapter timeout value for I2C transfers")
>> Fixes: be27ed672878 ("i3c: master: cdns: use adapter timeout value for I2C transfers")
>> Fixes: c0a90eb55a69 ("i3c: mipi-i3c-hci: use adapter timeout value for I2C transfers")
>> Fixes: a747e01adad2 ("i3c: master: svc: use adapter timeout value for I2C transfers")
>> Fixes: 3a379bbcea0a ("i3c: Add core I3C infrastructure")
>> Signed-off-by: Jarkko Nikula <jarkko.nikula at linux.intel.com>
> 
> Fixes: d028219a9f14 ("i3c: master: Add basic driver for the Renesas I3C controller")
> Reviewed-by: Wolfram Sang <wsa+renesas at sang-engineering.com>
> 
> Thank you!
> 
Ah, thanks! Somehow my eyes only saw the 1st call to the 
wait_for_completion_timeout() in renesas-i3c.c passing 
msecs_to_jiffies(1000) :-)

I didn't Cc stable since I don't think any of your patches cause any 
other issue than extra long wait in case of I2C transfer error on 
configurations where CONFIG_HZ is less than 1000 but now I'm unsure 
should it be Cc'ed?