[PATCH v9 6/6] iio: magnetometer: Add mmc5633 sensor

[Frank Li]

On Mon, Nov 03, 2025 at 10:13:58AM +0200, Andy Shevchenko wrote:
> On Fri, Oct 31, 2025 at 12:39:18PM -0400, Frank Li wrote:
> > Add mmc5633 sensor basic support.
> > - Support read 20 bits X/Y/Z magnetic.
> > - Support I3C HDR mode to send start measurememt command.
> > - Support I3C HDR mode to read all sensors data by one command.
>
> ...
>
> > - 1 -> ARRAY_SIZE()
>
> Maybe I missed the answer, but why are the arrays to begin with?
>

I3C/I2C transfer API required pass down one array. Keep the same coding
style with existed one, like

source/drivers/base/regmap/regmap-i3c.c


> ...
>
> > +#define MMC5633_REG_YOUT_H	0x03
> > +#define MMC5633_REG_ZOUT_L	0x04
> > +#define MMC5633_REG_ZOUT_H	0x05
> > +#define MMC5633_REG_XOUT_2	0x06
> > +#define MMC5633_REG_YOUT_2	0x07
> > +#define MMC5633_REG_ZOUT_2	0x08
> > +#define MMC5633_REG_TOUT	0x09
>
> Are those _L, _H, _2 come from the datasheet

I will align datasheet, which use 0, 1, 2.

>
>
> > +	ret = regmap_attach_dev(dev, regmap, &mmc5633_regmap_config);
> > +	if (ret)
> > +		return ret;
>
> Why?

I double check code, it should already called in __regmap_init(). It should
be reduntant.

Frank
>
> ...
>
> > +	ret = regmap_attach_dev(dev, regmap, &mmc5633_regmap_config);
> > +	if (ret)
> > +		return ret;
>
>
> Ditto.
>
> --
> With Best Regards,
> Andy Shevchenko
>
>