[PATCH RFC 3/7] dt-bindings: i3c: renesas,i3c: Add binding for Renesas I3C controller
Wolfram Sang
wsa+renesas at sang-engineering.com
Wed Jun 11 02:39:27 PDT 2025
From: Tommaso Merciai <tommaso.merciai.xr at bp.renesas.com>
Available in RZ/G3S and G3E SoCs. The G3S has 17 interrupts, the G3E 16
with the "HDR exit" interrupt missing. This interrupt is put to the end
of the list, so we can handle the difference using "minItems" instead of
defining a separate interrupt list per SoC.
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr at bp.renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas at sang-engineering.com>
---
Tommaso also did a version with two interrupt lists and using 'oneOf'. I
prefer this version but maybe the other one is preferred upstream?
.../devicetree/bindings/i3c/renesas,i3c.yaml | 186 ++++++++++++++++++
1 file changed, 186 insertions(+)
create mode 100644 Documentation/devicetree/bindings/i3c/renesas,i3c.yaml
diff --git a/Documentation/devicetree/bindings/i3c/renesas,i3c.yaml b/Documentation/devicetree/bindings/i3c/renesas,i3c.yaml
new file mode 100644
index 000000000000..e6e6c57bb56c
--- /dev/null
+++ b/Documentation/devicetree/bindings/i3c/renesas,i3c.yaml
@@ -0,0 +1,186 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i3c/renesas,i3c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas I3C Bus Interface
+
+maintainers:
+ - Wolfram Sang <wsa+renesas at sang-engineering.com>
+ - Tommaso Merciai <tommaso.merciai.xr at bp.renesas.com>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - renesas,r9a08g045-i3c # RZ/G3S
+ - renesas,r9a09g047-i3c # RZ/G3E
+ - const: renesas,i3c
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ items:
+ - description: Non-recoverable internal error interrupt
+ - description: Normal transfer error interrupt
+ - description: Normal transfer abort interrupt
+ - description: Normal response status buffer full interrupt
+ - description: Normal command buffer empty interrupt
+ - description: Normal IBI status buffer full interrupt
+ - description: Normal Rx data buffer full interrupt
+ - description: Normal Tx data buffer empty interrupt
+ - description: Normal receive status buffer full interrupt
+ - description: START condition detection interrupt
+ - description: STOP condition detection interrupt
+ - description: Transmit end interrupt
+ - description: NACK detection interrupt
+ - description: Arbitration lost interrupt
+ - description: Timeout detection interrupt
+ - description: Wake-up condition detection interrupt
+ - description: HDR Exit Pattern detection interrupt
+ minItems: 16
+
+ interrupt-names:
+ items:
+ - const: ierr
+ - const: terr
+ - const: abort
+ - const: resp
+ - const: cmd
+ - const: ibi
+ - const: rx
+ - const: tx
+ - const: rcv
+ - const: st
+ - const: sp
+ - const: tend
+ - const: nack
+ - const: al
+ - const: tmo
+ - const: wu
+ - const: exit
+ minItems: 16
+
+ clocks:
+ oneOf:
+ - items:
+ - description: APB bus clock
+ - description: transfer clock
+ - items:
+ - description: APB bus clock
+ - description: SFRs clock
+ - description: transfer clock
+
+ clock-names:
+ oneOf:
+ - items:
+ - const: pclk
+ - const: tclk
+ - items:
+ - const: pclk
+ - const: pclkrw
+ - const: tclk
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ items:
+ - description: Reset signal
+ - description: APB interface reset signal/SCAN reset signal
+
+ reset-names:
+ items:
+ - const: presetn
+ - const: tresetn
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - clock-names
+ - clocks
+ - power-domains
+ - resets
+ - reset-names
+
+allOf:
+ - $ref: i3c.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: renesas,r9a08g045-i3c
+ then:
+ properties:
+ clocks:
+ maxItems: 2
+ clock-names:
+ maxItems: 2
+ interrupts:
+ minItems: 17
+ interrupt-names:
+ minItems: 17
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: renesas,r9a09g047-i3c
+ then:
+ properties:
+ clocks:
+ minItems: 3
+ clock-names:
+ minItems: 3
+ interrupts:
+ maxItems: 16
+ interrupt-names:
+ maxItems: 16
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r9a08g045-cpg.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ i3c at 1005b000 {
+ compatible = "renesas,r9a08g045-i3c", "renesas,i3c";
+ reg = <0x1005b000 0x1000>;
+ clocks = <&cpg CPG_MOD R9A08G045_I3C_PCLK>,
+ <&cpg CPG_MOD R9A08G045_I3C_TCLK>;
+ clock-names = "pclk", "tclk";
+ interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 294 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ierr", "terr", "abort", "resp",
+ "cmd", "ibi", "rx", "tx", "rcv",
+ "st", "sp", "tend", "nack",
+ "al", "tmo", "wu", "exit";
+ resets = <&cpg R9A08G045_I3C_PRESETN>,
+ <&cpg R9A08G045_I3C_TRESETN>;
+ reset-names = "presetn", "tresetn";
+ power-domains = <&cpg>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ };
+...
--
2.47.2
More information about the linux-i3c
mailing list