[PATCH v2 0/2] i3c: add support for the Renesas controller

[Wolfram Sang]

Here is a basic driver for the I3C IP found in various Renesas SoCs like
RZ/G3S and G3E. Missing features to be added incrementally are IBI,
HotJoin and maybe target support. Other than that, this driver has been
tested with I3C pure busses (2 targets) and mixed busses (2 I3C +
various I2C targets). DAA and reading/writing to the temperature sensors
worked reliably at different speeds. Scoping the bus, the output from
the protocol analyzer seems reasonable, too. It was created by merging
two versions of it from two different BSPs. Then, improved according to
code analyzers, cleaned up with regard to coding style, and then
refactored to hopefully match I3C subsystem standards.

Changes since v1 are described in the individual patches. A branch with
enablement patches for RZ/G3S+G3E can be found here:

git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git renesas/g3s/i3c

Looking forward to comments,

   Wolfram


Tommaso Merciai (1):
  dt-bindings: i3c: renesas,i3c: Add binding for Renesas I3C controller

Wolfram Sang (1):
  i3c: master: Add basic driver for the Renesas I3C controller

 .../devicetree/bindings/i3c/renesas,i3c.yaml  |  179 +++
 MAINTAINERS                                   |    7 +
 drivers/i3c/master/Kconfig                    |   10 +
 drivers/i3c/master/Makefile                   |    1 +
 drivers/i3c/master/renesas-i3c.c              | 1425 +++++++++++++++++
 5 files changed, 1622 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i3c/renesas,i3c.yaml
 create mode 100644 drivers/i3c/master/renesas-i3c.c

-- 
2.47.2