[PATCH 1/2] dt-bindings: i3c: Add binding for AMD I3C master controller

[Frank Li]

On Thu, Jul 03, 2025 at 04:44:27PM +0530, Manikanta Guntupalli wrote:

Subject needn't binding twice.

dt-bindings: i3c: Add AMD I3C master controller support

> Add device tree binding documentation for the AMD I3C master controller.
>
> The controller is represented by the compatible string "xlnx,axi-i3c-1.0".
> The binding specifies required properties including register space, clock,
> resets, interrupts and number of i3c target devices, and provides
> an example usage.
>
> Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli at amd.com>
> ---
>  .../devicetree/bindings/i3c/xlnx,axi-i3c.yaml | 61 +++++++++++++++++++
>  1 file changed, 61 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/i3c/xlnx,axi-i3c.yaml
>
> diff --git a/Documentation/devicetree/bindings/i3c/xlnx,axi-i3c.yaml b/Documentation/devicetree/bindings/i3c/xlnx,axi-i3c.yaml
> new file mode 100644
> index 000000000000..d4ad3721096f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i3c/xlnx,axi-i3c.yaml
> @@ -0,0 +1,61 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/i3c/xlnx,axi-i3c.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: AMD I3C master
> +
> +maintainers:
> +  - Manikanta Guntupalli <manikanta.guntupalli at amd.com>
> +
> +description:
> +  The AXI-I3C IP is an I3C Controller with an AXI4-Lite interface, compatible
> +  with the MIPI I3C Specification v1.1.1. The design includes bidirectional I/O
> +  buffers that implement open collector drivers for the SDA and SCL signals.
> +  External pull-up resistors are required to properly hold the bus at a Logic-1
> +  level when the drivers are released.
> +
> +allOf:
> +  - $ref: i3c.yaml#

I perfer put allOf after required, incase need add if-else branch later.

> +
> +properties:
> +  compatible:
> +    const: xlnx,axi-i3c-1.0
> +
> +  resets:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  xlnx,num-targets:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      Number of i3c target devices connected on the bus.
> +    minimum: 1
> +    maximum: 32
> +    default: 1

why need this property? i3c is self probe or children nodes in dts.

Frank

> +
> +required:
> +  - reg
> +  - clocks
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    i3c at 80000000 {
> +        compatible = "xlnx,axi-i3c-1.0";
> +        reg = <0x80000000 0x10000>;
> +        clocks = <&zynqmp_clk 71>;
> +        #address-cells = <3>;
> +        #size-cells = <0>;
> +    };
> +...
> --
> 2.34.1
>