[PATCH 1/1] i3c: master: Fix missing 'ret' assignment in set_speed()

[Frank Li]

Fix a probe failure in the i3c master driver that occurs when no i3c
devices are connected to the bus.

The issue arises in `i3c_master_bus_init()` where the `ret` value is not
updated after calling `master->ops->set_speed()`. If no devices are
present, `ret` remains set to `I3C_ERROR_M2`, causing the code to
incorrectly proceed to `err_bus_cleanup`.

Cc: stable at vger.kernel.org
Fixes: aef79e189ba2 ("i3c: master: support to adjust first broadcast address speed")
Signed-off-by: Frank Li <Frank.Li at nxp.com>
---
 drivers/i3c/master.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c
index 42310c9a00c2d..53ab814b676ff 100644
--- a/drivers/i3c/master.c
+++ b/drivers/i3c/master.c
@@ -1919,7 +1919,7 @@ static int i3c_master_bus_init(struct i3c_master_controller *master)
 		goto err_bus_cleanup;
 
 	if (master->ops->set_speed) {
-		master->ops->set_speed(master, I3C_OPEN_DRAIN_NORMAL_SPEED);
+		ret = master->ops->set_speed(master, I3C_OPEN_DRAIN_NORMAL_SPEED);
 		if (ret)
 			goto err_bus_cleanup;
 	}
-- 
2.34.1