[PATCH v2 1/1] i3c: master: svc: skip address resend on repeat START

Frank Li Frank.Li at nxp.com
Mon Apr 28 22:42:34 PDT 2025


According to the I3C specification, address arbitration only happens during
the START. Repeated START do not initiate arbitration, and In-Band
Interrupts (IBIs) cannot occur at this stage.

Resending the address upon a NACK in a repeat START is therefore redundant
and unnecessary. Avoid redundant retries, improving efficiency and ensuring
protocol compliance.

Signed-off-by: Frank Li <Frank.Li at nxp.com>
---
change from v1 to v2
- change !!i  to i > 0
---
 drivers/i3c/master/svc-i3c-master.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/i3c/master/svc-i3c-master.c b/drivers/i3c/master/svc-i3c-master.c
index 85e16de208d3b..c5e4f7c0f47e2 100644
--- a/drivers/i3c/master/svc-i3c-master.c
+++ b/drivers/i3c/master/svc-i3c-master.c
@@ -1281,9 +1281,9 @@ static int svc_i3c_master_write(struct svc_i3c_master *master,
 static int svc_i3c_master_xfer(struct svc_i3c_master *master,
 			       bool rnw, unsigned int xfer_type, u8 addr,
 			       u8 *in, const u8 *out, unsigned int xfer_len,
-			       unsigned int *actual_len, bool continued)
+			       unsigned int *actual_len, bool continued, bool repeat_start)
 {
-	int retry = 2;
+	int retry = repeat_start ? 1 : 2;
 	u32 reg;
 	int ret;
 
@@ -1468,7 +1468,7 @@ static void svc_i3c_master_start_xfer_locked(struct svc_i3c_master *master)
 		ret = svc_i3c_master_xfer(master, cmd->rnw, xfer->type,
 					  cmd->addr, cmd->in, cmd->out,
 					  cmd->len, &cmd->actual_len,
-					  cmd->continued);
+					  cmd->continued, i > 0);
 		/* cmd->xfer is NULL if I2C or CCC transfer */
 		if (cmd->xfer)
 			cmd->xfer->actual_len = cmd->actual_len;
-- 
2.34.1




More information about the linux-i3c mailing list