[PATCH v3 1/3] dt-bindings: i3c: Add support for Qualcomm I3C controller

[Mukesh Kumar Savaliya]

On 4/3/2025 7:16 PM, Mukesh Kumar Savaliya wrote:
> Add device tree bindings for the Qualcomm I3C controller. This includes
> the necessary documentation and properties required to describe the
> hardware in the device tree.
> 
> Signed-off-by: Mukesh Kumar Savaliya <quic_msavaliy at quicinc.com>
> ---
>   .../bindings/i3c/qcom,geni-i3c.yaml           | 63 +++++++++++++++++++
>   1 file changed, 63 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/i3c/qcom,geni-i3c.yaml
> 
> diff --git a/Documentation/devicetree/bindings/i3c/qcom,geni-i3c.yaml b/Documentation/devicetree/bindings/i3c/qcom,geni-i3c.yaml
> new file mode 100644
> index 000000000000..25f0d92204d9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i3c/qcom,geni-i3c.yaml
> @@ -0,0 +1,63 @@
> +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/i3c/qcom,geni-i3c.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Geni based QUP I3C Controller
> +
> +maintainers:
> +  - Mukesh Kumar Savaliya <quic_msavaliy at quicinc.com>
> +
> +description:
> +  I3C in master mode supports up to 12.5MHz, SDR mode data transfer in mixed
> +  bus mode (I2C and I3C target devices on same i3c bus). It also supports
> +  hotjoin, IBI mechanism.
> +
> +  I3C Controller nodes must be child of GENI based Qualcomm Universal
> +  Peripharal. Please refer GENI based QUP wrapper controller node bindings
> +  described in Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml.
> +
> +allOf:
> +  - $ref: i3c.yaml#
> +
> +properties:
> +  compatible:
> +    - qcom,geni-i3c
To be replaced by "const: qcom,geni-i3c", left this in local.
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    const: se
> +
> +  interrupts:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - interrupts
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/qcom,sm8550-gcc.h>
> +
> +    i3c at 884000 {
> +        compatible = "qcom,geni-i3c";
> +        reg = <0x00884000 0x4000>;
> +        clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
> +        clock-names = "se";
> +        interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
> +        #address-cells = <3>;
> +        #size-cells = <0>;
> +    };
> +...