[PATCH v6 0/6] Introduce initial AMD I3C HCI driver support

[Alexandre Belloni]

On Thu, 29 Aug 2024 14:47:07 +0530, Shyam Sundar S K wrote:
> The AMD SoC includes an I3C IP block as part of the Fusion Controller Hub
> (FCH). This series introduces the initial driver support to enable the I3C
> IP block on AMD's latest processors.
> 
> Currently, the code is closely tied to dt-bindings. This initial set aims
> to decouple some of these bindings by adding the MIPI ID, allowing the
> current driver to support ACPI-enabled x86 systems.
> 
> [...]

Applied, thanks!

[1/6] i3c: mipi-i3c-hci: Add AMDI5017 ACPI ID to the I3C Support List
      https://git.kernel.org/abelloni/c/8d2e56ef83ce
[2/6] i3c: mipi-i3c-hci: Read HC_CONTROL_PIO_MODE only after i3c hci v1.1
      https://git.kernel.org/abelloni/c/039b23609ff2
[3/6] i3c: mipi-i3c-hci: Add a quirk to set PIO mode
      https://git.kernel.org/abelloni/c/014089329953
[4/6] i3c: mipi-i3c-hci: Relocate helper macros to HCI header file
      https://git.kernel.org/abelloni/c/216201b3d7df
[5/6] i3c: mipi-i3c-hci: Add a quirk to set timing parameters
      https://git.kernel.org/abelloni/c/46d4daa517e9
[6/6] i3c: mipi-i3c-hci: Add a quirk to set Response buffer threshold
      https://git.kernel.org/abelloni/c/ced86959d28c

Best regards,

-- 
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com