[PATCH v5 2/6] dt-bindings: i3c: mipi-hci: Include the bus binding

[Miquel Raynal]

Update a little bit the content to match the bus binding, including:
- the node title should have been named after the description done
  in the historical i3c.txt file, ie: i3c-master@<address>
- child nodes should be accepted even though the drivers do not currently
  support it
- #address-cells and #size-cells are also mandatory and have specific
  values

Cc: Nicolas Pitre <nico at fluxnic.net>
Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
---
 Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml b/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml
index 07a7b10163a3..04da001fc6ec 100644
--- a/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml
+++ b/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml
@@ -9,6 +9,9 @@ title: MIPI I3C HCI Device Tree Bindings
 maintainers:
   - Nicolas Pitre <npitre at baylibre.com>
 
+allOf:
+  - $ref: /schemas/i3c/i3c.yaml#
+
 description: |
   MIPI I3C Host Controller Interface
 
@@ -36,12 +39,14 @@ required:
   - reg
   - interrupts
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
-    i3c at a0000000 {
+    i3c-master at a0000000 {
       compatible = "mipi-i3c-hci";
       reg = <0xa0000000 0x2000>;
       interrupts = <89>;
+      #address-cells = <3>;
+      #size-cells = <0>;
     };
-- 
2.20.1