[PATCH v3 1/2] dt-bindings: i3c: MIPI I3C Host Controller Interface

[Rob Herring]

On Mon, 02 Nov 2020 17:22:19 -0500, Nicolas Pitre wrote:
> From: Nicolas Pitre <npitre at baylibre.com>
> 
> The MIPI I3C HCI (Host Controller Interface) specification defines
> a common software driver interface to support compliant MIPI I3C
> host controller hardware implementations from multiple vendors.
> 
> All that is needed is an I/O area and an interrupt signal;. The hardware
> is self-advertising wrt its implementor and implemented capabilities so
> there is currently no details that the driver can't figure out on its own.
> 
> Signed-off-by: Nicolas Pitre <npitre at baylibre.com>
> ---
>  .../devicetree/bindings/i3c/mipi-i3c-hci.yaml | 45 +++++++++++++++++++
>  1 file changed, 45 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml
> 


My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml: 'additionalProperties' is a required property
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml: ignoring, error in schema: 
warning: no schema found in file: ./Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml


See https://patchwork.ozlabs.org/patch/1392544

The base for the patch is generally the last rc1. Any dependencies
should be noted.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.