[Patch] staging: remove obsoleted CS5535/CS5536 GPIO driver
Andres Salomon
dilinger at queued.net
Thu Jun 16 12:21:21 EDT 2011
Looks good to me, thanks. FWIW, no one's complained about lack of
functionality in the new driver.
Acked-by: Andres Salomon <dilinger at queued.net>
On Thu, 16 Jun 2011
15:48:29 +0800 Américo Wang <xiyou.wangcong at gmail.com> wrote:
> It is scheduled to be removed.
>
> Cc: Andres Salomon <dilinger at queued.net>
> Signed-off-by: WANG Cong <xiyou.wangcong at gmail.com>
>
> ---
> Documentation/feature-removal-schedule.txt | 14 --
> drivers/staging/Kconfig | 2 -
> drivers/staging/cs5535_gpio/Kconfig | 11 --
> drivers/staging/cs5535_gpio/Makefile | 1 -
> drivers/staging/cs5535_gpio/TODO | 6 -
> drivers/staging/cs5535_gpio/cs5535_gpio.c | 260
> ---------------------------- 6 files changed, 0 insertions(+), 294
> deletions(-)
>
> diff --git a/Documentation/feature-removal-schedule.txt
> b/Documentation/feature-removal-schedule.txt index 72e2384..6257186
> 100644 --- a/Documentation/feature-removal-schedule.txt
> +++ b/Documentation/feature-removal-schedule.txt
> @@ -193,20 +193,6 @@ Why: /proc/<pid>/oom_adj allows userspace
> to influence the oom killer's
> ---------------------------
>
> -What: CS5535/CS5536 obsolete GPIO driver
> -When: June 2011
> -Files: drivers/staging/cs5535_gpio/*
> -Check: drivers/staging/cs5535_gpio/cs5535_gpio.c
> -Why: A newer driver replaces this; it is
> drivers/gpio/cs5535-gpio.c, and
> - integrates with the Linux GPIO subsystem. The old driver
> has been
> - moved to staging, and will be removed altogether around
> 2.6.40.
> - Please test the new driver, and ensure that the
> functionality you
> - need and any bugfixes from the old driver are available in
> the new
> - one.
> -Who: Andres Salomon <dilinger at queued.net>
> -
> ---------------------------
> -
> What: remove EXPORT_SYMBOL(kernel_thread)
> When: August 2006
> Files: arch/*/kernel/*_ksyms.c
> diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
> index 196284d..a85c11a 100644
> --- a/drivers/staging/Kconfig
> +++ b/drivers/staging/Kconfig
> @@ -100,8 +100,6 @@ source "drivers/staging/sep/Kconfig"
>
> source "drivers/staging/iio/Kconfig"
>
> -source "drivers/staging/cs5535_gpio/Kconfig"
> -
> source "drivers/staging/zram/Kconfig"
>
> source "drivers/staging/zcache/Kconfig"
> diff --git a/drivers/staging/cs5535_gpio/Kconfig
> b/drivers/staging/cs5535_gpio/Kconfig deleted file mode 100644
> index a1b3a8d..0000000
> --- a/drivers/staging/cs5535_gpio/Kconfig
> +++ /dev/null
> @@ -1,11 +0,0 @@
> -config CS5535_GPIO
> - tristate "AMD CS5535/CS5536 GPIO (Geode Companion Device)"
> - depends on X86_32
> - help
> - Note: this driver is DEPRECATED. Please use the
> cs5535-gpio module
> - in the GPIO section instead (CONFIG_GPIO_CS5535).
> -
> - Give userspace access to the GPIO pins on the AMD CS5535
> and
> - CS5536 Geode companion devices.
> -
> - If compiled as a module, it will be called cs5535_gpio.
> diff --git a/drivers/staging/cs5535_gpio/Makefile
> b/drivers/staging/cs5535_gpio/Makefile deleted file mode 100644
> index d67c4b8..0000000
> --- a/drivers/staging/cs5535_gpio/Makefile
> +++ /dev/null
> @@ -1 +0,0 @@
> -obj-$(CONFIG_CS5535_GPIO) += cs5535_gpio.o
> diff --git a/drivers/staging/cs5535_gpio/TODO
> b/drivers/staging/cs5535_gpio/TODO deleted file mode 100644
> index 98d1cd1..0000000
> --- a/drivers/staging/cs5535_gpio/TODO
> +++ /dev/null
> @@ -1,6 +0,0 @@
> -This is an obsolete driver for some the CS5535 and CS5536
> southbridge GPIOs. -It has been replaced by a driver that makes use
> of the Linux GPIO subsystem. -Please switch to that driver, and let
> dilinger at queued.net know if there's -anything missing from the new
> driver. -
> -This driver is scheduled for removal in 2.6.40.
> diff --git a/drivers/staging/cs5535_gpio/cs5535_gpio.c
> b/drivers/staging/cs5535_gpio/cs5535_gpio.c deleted file mode 100644
> index b25f9d1..0000000
> --- a/drivers/staging/cs5535_gpio/cs5535_gpio.c
> +++ /dev/null
> @@ -1,260 +0,0 @@
> -/*
> - * AMD CS5535/CS5536 GPIO driver.
> - * Allows a user space process to play with the GPIO pins.
> - *
> - * Copyright (c) 2005 Ben Gardner <bgardner at wabtec.com>
> - *
> - * This program is free software; you can redistribute it and/or
> modify
> - * it under the smems of the GNU General Public License as published
> by
> - * the Free Software Foundation; version 2 of the License.
> - */
> -
> -#include <linux/fs.h>
> -#include <linux/module.h>
> -#include <linux/errno.h>
> -#include <linux/kernel.h>
> -#include <linux/init.h>
> -#include <linux/cdev.h>
> -#include <linux/ioport.h>
> -#include <linux/pci.h>
> -
> -#include <asm/uaccess.h>
> -#include <asm/io.h>
> -
> -
> -#define NAME "cs5535_gpio"
> -
> -MODULE_AUTHOR("Ben Gardner <bgardner at wabtec.com>");
> -MODULE_DESCRIPTION("AMD CS5535/CS5536 GPIO Pin Driver");
> -MODULE_LICENSE("GPL");
> -
> -static int major;
> -module_param(major, int, 0);
> -MODULE_PARM_DESC(major, "Major device number");
> -
> -static ulong mask;
> -module_param(mask, ulong, 0);
> -MODULE_PARM_DESC(mask, "GPIO channel mask");
> -
> -#define MSR_LBAR_GPIO 0x5140000C
> -
> -static u32 gpio_base;
> -
> -static struct pci_device_id divil_pci[] = {
> - { PCI_DEVICE(PCI_VENDOR_ID_NS,
> PCI_DEVICE_ID_NS_CS5535_ISA) },
> - { PCI_DEVICE(PCI_VENDOR_ID_AMD,
> PCI_DEVICE_ID_AMD_CS5536_ISA) },
> - { } /* NULL entry */
> -};
> -MODULE_DEVICE_TABLE(pci, divil_pci);
> -
> -static struct cdev cs5535_gpio_cdev;
> -
> -/* reserve 32 entries even though some aren't usable */
> -#define CS5535_GPIO_COUNT 32
> -
> -/* IO block size */
> -#define CS5535_GPIO_SIZE 256
> -
> -struct gpio_regmap {
> - u32 rd_offset;
> - u32 wr_offset;
> - char on;
> - char off;
> -};
> -static struct gpio_regmap rm[] =
> -{
> - { 0x30, 0x00, '1', '0' }, /* GPIOx_READ_BACK /
> GPIOx_OUT_VAL */
> - { 0x20, 0x20, 'I', 'i' }, /* GPIOx_IN_EN */
> - { 0x04, 0x04, 'O', 'o' }, /* GPIOx_OUT_EN */
> - { 0x08, 0x08, 't', 'T' }, /* GPIOx_OUT_OD_EN */
> - { 0x18, 0x18, 'P', 'p' }, /* GPIOx_OUT_PU_EN */
> - { 0x1c, 0x1c, 'D', 'd' }, /* GPIOx_OUT_PD_EN */
> -};
> -
> -
> -/**
> - * Gets the register offset for the GPIO bank.
> - * Low (0-15) starts at 0x00, high (16-31) starts at 0x80
> - */
> -static inline u32 cs5535_lowhigh_base(int reg)
> -{
> - return (reg & 0x10) << 3;
> -}
> -
> -static ssize_t cs5535_gpio_write(struct file *file, const char
> __user *data,
> - size_t len, loff_t *ppos)
> -{
> - u32 m = iminor(file->f_path.dentry->d_inode);
> - int i, j;
> - u32 base = gpio_base + cs5535_lowhigh_base(m);
> - u32 m0, m1;
> - char c;
> -
> - /**
> - * Creates the mask for atomic bit programming.
> - * The high 16 bits and the low 16 bits are used to set the
> mask.
> - * For example, GPIO 15 maps to 31,15: 0,1 => On; 1,0=> Off
> - */
> - m1 = 1 << (m & 0x0F);
> - m0 = m1 << 16;
> -
> - for (i = 0; i < len; ++i) {
> - if (get_user(c, data+i))
> - return -EFAULT;
> -
> - for (j = 0; j < ARRAY_SIZE(rm); j++) {
> - if (c == rm[j].on) {
> - outl(m1, base + rm[j].wr_offset);
> - /* If enabling output, turn off AUX
> 1 and AUX 2 */
> - if (c == 'O') {
> - outl(m0, base + 0x10);
> - outl(m0, base + 0x14);
> - }
> - break;
> - } else if (c == rm[j].off) {
> - outl(m0, base + rm[j].wr_offset);
> - break;
> - }
> - }
> - }
> - *ppos = 0;
> - return len;
> -}
> -
> -static ssize_t cs5535_gpio_read(struct file *file, char __user *buf,
> - size_t len, loff_t *ppos)
> -{
> - u32 m = iminor(file->f_path.dentry->d_inode);
> - u32 base = gpio_base + cs5535_lowhigh_base(m);
> - int rd_bit = 1 << (m & 0x0f);
> - int i;
> - char ch;
> - ssize_t count = 0;
> -
> - if (*ppos >= ARRAY_SIZE(rm))
> - return 0;
> -
> - for (i = *ppos; (i < (*ppos + len)) && (i < ARRAY_SIZE(rm));
> i++) {
> - ch = (inl(base + rm[i].rd_offset) & rd_bit) ?
> - rm[i].on : rm[i].off;
> -
> - if (put_user(ch, buf+count))
> - return -EFAULT;
> -
> - count++;
> - }
> -
> - /* add a line-feed if there is room */
> - if ((i == ARRAY_SIZE(rm)) && (count < len)) {
> - if (put_user('\n', buf + count))
> - return -EFAULT;
> - count++;
> - }
> -
> - *ppos += count;
> - return count;
> -}
> -
> -static int cs5535_gpio_open(struct inode *inode, struct file *file)
> -{
> - u32 m = iminor(inode);
> -
> - /* the mask says which pins are usable by this driver */
> - if ((mask & (1 << m)) == 0)
> - return -EINVAL;
> -
> - return nonseekable_open(inode, file);
> -}
> -
> -static const struct file_operations cs5535_gpio_fops = {
> - .owner = THIS_MODULE,
> - .write = cs5535_gpio_write,
> - .read = cs5535_gpio_read,
> - .open = cs5535_gpio_open,
> - .llseek = no_llseek,
> -};
> -
> -static int __init cs5535_gpio_init(void)
> -{
> - dev_t dev_id;
> - u32 low, hi;
> - int retval;
> -
> - if (pci_dev_present(divil_pci) == 0) {
> - printk(KERN_WARNING NAME ": DIVIL not found\n");
> - return -ENODEV;
> - }
> -
> - /* Grab the GPIO I/O range */
> - rdmsr(MSR_LBAR_GPIO, low, hi);
> -
> - /* Check the mask and whether GPIO is enabled (sanity check)
> */
> - if (hi != 0x0000f001) {
> - printk(KERN_WARNING NAME ": GPIO not enabled\n");
> - return -ENODEV;
> - }
> -
> - /* Mask off the IO base address */
> - gpio_base = low & 0x0000ff00;
> -
> - /**
> - * Some GPIO pins
> - * 31-29,23 : reserved (always mask out)
> - * 28 : Power Button
> - * 26 : PME#
> - * 22-16 : LPC
> - * 14,15 : SMBus
> - * 9,8 : UART1
> - * 7 : PCI INTB
> - * 3,4 : UART2/DDC
> - * 2 : IDE_IRQ0
> - * 0 : PCI INTA
> - *
> - * If a mask was not specified, be conservative and only
> allow:
> - * 1,2,5,6,10-13,24,25,27
> - */
> - if (mask != 0)
> - mask &= 0x1f7fffff;
> - else
> - mask = 0x0b003c66;
> -
> - if (!request_region(gpio_base, CS5535_GPIO_SIZE, NAME)) {
> - printk(KERN_ERR NAME ": can't allocate I/O for
> GPIO\n");
> - return -ENODEV;
> - }
> -
> - if (major) {
> - dev_id = MKDEV(major, 0);
> - retval = register_chrdev_region(dev_id,
> CS5535_GPIO_COUNT,
> - NAME);
> - } else {
> - retval = alloc_chrdev_region(&dev_id, 0,
> CS5535_GPIO_COUNT,
> - NAME);
> - major = MAJOR(dev_id);
> - }
> -
> - if (retval) {
> - release_region(gpio_base, CS5535_GPIO_SIZE);
> - return -1;
> - }
> -
> - printk(KERN_DEBUG NAME ": base=%#x mask=%#lx major=%d\n",
> - gpio_base, mask, major);
> -
> - cdev_init(&cs5535_gpio_cdev, &cs5535_gpio_fops);
> - cdev_add(&cs5535_gpio_cdev, dev_id, CS5535_GPIO_COUNT);
> -
> - return 0;
> -}
> -
> -static void __exit cs5535_gpio_cleanup(void)
> -{
> - dev_t dev_id = MKDEV(major, 0);
> -
> - cdev_del(&cs5535_gpio_cdev);
> - unregister_chrdev_region(dev_id, CS5535_GPIO_COUNT);
> - release_region(gpio_base, CS5535_GPIO_SIZE);
> -}
> -
> -module_init(cs5535_gpio_init);
> -module_exit(cs5535_gpio_cleanup);
More information about the Linux-geode
mailing list