2.6.33-rc3 regression: leds_alix2: can't allocate I/O for GPIO
Arnd Hannemann
hannemann at nets.rwth-aachen.de
Thu Jan 7 05:26:37 EST 2010
Hi,
with 2.6.33-rc3 the LEDs are not working anymore on my Geode embedded board:
If I remember correctly this was working fine with 2.6.32, but certainly with 2.6.31
relevant dmesg output of 2.6.33-rc3:
[ 0.709643] cs5535_gpio: base=0x6100 mask=0xb003c66 major=253
[ 2.207947] leds_alix2: system is recognized as "PC Engines ALIX.2 v0.99h"
[ 2.228678] leds_alix2: can't allocate I/O for GPIO
For reference dmesg of 2.6.31.3:
[ 0.611953] cs5535_gpio: base=0x6100 mask=0xb003c66 major=253
[ 2.379114] leds_alix2: system is recognized as "PC Engines ALIX.2"
[ 2.399097] Registered led device: alix:1
[ 2.411404] Registered led device: alix:2
[ 2.423720] Registered led device: alix:3
Best regards,
Arnd
More information about the Linux-geode
mailing list