<br clear="all"><br>Hi,<br>
<br>
I am using S3C2440 ARM9 board and linux-2.6.30.4 kernel is
ported and i am using the IDE of the board for our project application,
the thing is i have used the address bus LADD1, LADDR2, LADDR3 and data
bus LDATA0-LDATA7. Now i need to write some 8-bit data(say 0xAA) to the
memory location 0x0800_0000 (nGCS1) and check that data(0xAA) is
available on the data bus. How to do this in linux?<br>
<br clear="all"><br>-- <br>Thanks & Regards,<br>SANDEEP G R, <br><br><br>