Untraceable problem with Minicom
Ulf Samuelsson
ulf.samuelsson at atmel.com
Mon Jan 31 17:58:40 EST 2011
Shahnewaz Chowdhury skrev:
> Dear all,
>
> I am facing an untraceable problem with minicom. Allow me to provide proper
> details so that it will be easier to provide assistance.
>
> I am using a desktop PC with Ubuntu 10.10. It has only one serial port (ttyS0)
> and I have verified that using the command " dmesg | grep tty ".
>
> My development board is called HDP6410, which is a clone of the SMDK6410. The
> processor is S3C6410 with ARM 1176 JZ(F)-S core. After I start minicom, when I
> connect the board to the pc using a null-modem cable and power up the board I am
> supposed to see booting updates on minicom, followed by a prompt that would
> allow me to access the board. However, I do not see anything. I know that the
> serial port on the pc and the serial cable are fully functional because I do get
> all the booting updates and prompt when I use a custom serial communication
> software provided with the board. However, I want to use minicom because the
> custom software provides no means of transferring files.
>
> I added my username to the following groups : dialout, uucp and tty.
>
> I have also checked that ttyS0 has read/write permissions.
>
> My settings in minicom are as follows:
>
> Serial Device : /dev/ttyS0
> Lockfile Location : /var/lock
> Bps / Par / Bits : 115200 8N1
> hardware flow control : no
> software flow control : no
>
> I have tried running minicom both as normal user and root, but I still get no
> output on the console when I power up the board. I know for sure that the serial
> port on the board is working fine and it does send messages once I power up the
> board. Something is wrong on the PC side. For some reason when I run minicom,
> the connection is probably not established on the PC side.
>
> Am I missing any essential configurations / settings ?
>
> I would highly appreciated some guidance on this. I have been trying for a week
> now without any positive result. Please help.
>
> Sincerely,
> Shan
>
I would connect my host PC to another PC, and see if THAT works.
What does the modem init strings do you your board?
Are they cleared?
BR
Ulf Samuelsson
>
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> linux-arm mailing list
> linux-arm at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm
More information about the linux-arm
mailing list