Adopt the DMA implementation from atari_NCR5380.c. This means that atari_scsi and sun3_scsi can make use of the NCR5380.c core driver and the atari_NCR5380.c driver fork can be made redundant. Signed-off-by: Finn Thain Reviewed-by: Hannes Reinecke Tested-by: Michael Schmitz --- drivers/scsi/NCR5380.c | 170 +++++++++++++++++++++++++++++++++++--------- drivers/scsi/arm/cumana_1.c | 3 drivers/scsi/arm/oak.c | 3 drivers/scsi/dmx3191d.c | 1 drivers/scsi/dtc.c | 2 drivers/scsi/dtc.h | 1 drivers/scsi/g_NCR5380.c | 2 drivers/scsi/g_NCR5380.h | 1 drivers/scsi/mac_scsi.c | 3 drivers/scsi/pas16.c | 2 drivers/scsi/pas16.h | 1 drivers/scsi/t128.c | 2 drivers/scsi/t128.h | 1 13 files changed, 152 insertions(+), 40 deletions(-) Index: linux/drivers/scsi/NCR5380.c =================================================================== --- linux.orig/drivers/scsi/NCR5380.c 2016-03-21 13:31:25.000000000 +1100 +++ linux/drivers/scsi/NCR5380.c 2016-03-21 13:31:27.000000000 +1100 @@ -31,9 +31,6 @@ /* * Further development / testing that should be done : - * 1. Cleanup the NCR5380_transfer_dma function and DMA operation complete - * code so that everything does the same thing that's done at the - * end of a pseudo-DMA read operation. * * 4. Test SCSI-II tagged queueing (I have no devices which support * tagged queueing) @@ -117,6 +114,8 @@ * * PSEUDO_DMA - if defined, PSEUDO DMA is used during the data transfer phases. * + * REAL_DMA - if defined, REAL DMA is used during the data transfer phases. + * * These macros MUST be defined : * * NCR5380_read(register) - read from the specified register @@ -801,6 +800,72 @@ static void NCR5380_main(struct work_str } while (!done); } +/* + * NCR5380_dma_complete - finish DMA transfer + * @instance: the scsi host instance + * + * Called by the interrupt handler when DMA finishes or a phase + * mismatch occurs (which would end the DMA transfer). + */ + +static void NCR5380_dma_complete(struct Scsi_Host *instance) +{ + struct NCR5380_hostdata *hostdata = shost_priv(instance); + int transferred; + unsigned char **data; + int *count; + int saved_data = 0, overrun = 0; + unsigned char p; + + if (hostdata->read_overruns) { + p = hostdata->connected->SCp.phase; + if (p & SR_IO) { + udelay(10); + if ((NCR5380_read(BUS_AND_STATUS_REG) & + (BASR_PHASE_MATCH | BASR_ACK)) == + (BASR_PHASE_MATCH | BASR_ACK)) { + saved_data = NCR5380_read(INPUT_DATA_REG); + overrun = 1; + dsprintk(NDEBUG_DMA, instance, "read overrun handled\n"); + } + } + } + + NCR5380_write(MODE_REG, MR_BASE); + NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); + NCR5380_read(RESET_PARITY_INTERRUPT_REG); + + transferred = hostdata->dma_len - NCR5380_dma_residual(instance); + hostdata->dma_len = 0; + + data = (unsigned char **)&hostdata->connected->SCp.ptr; + count = &hostdata->connected->SCp.this_residual; + *data += transferred; + *count -= transferred; + + if (hostdata->read_overruns) { + int cnt, toPIO; + + if ((NCR5380_read(STATUS_REG) & PHASE_MASK) == p && (p & SR_IO)) { + cnt = toPIO = hostdata->read_overruns; + if (overrun) { + dsprintk(NDEBUG_DMA, instance, + "Got an input overrun, using saved byte\n"); + *(*data)++ = saved_data; + (*count)--; + cnt--; + toPIO--; + } + if (toPIO > 0) { + dsprintk(NDEBUG_DMA, instance, + "Doing %d byte PIO to 0x%p\n", cnt, *data); + NCR5380_transfer_pio(instance, &p, &cnt, data); + *count -= toPIO - cnt; + } + } + } +} + #ifndef DONT_USE_INTR /** @@ -855,7 +920,22 @@ static irqreturn_t NCR5380_intr(int irq, dsprintk(NDEBUG_INTR, instance, "IRQ %d, BASR 0x%02x, SR 0x%02x, MR 0x%02x\n", irq, basr, sr, mr); - if ((NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_mask) && + if ((mr & MR_DMA_MODE) || (mr & MR_MONITOR_BSY)) { + /* Probably End of DMA, Phase Mismatch or Loss of BSY. + * We ack IRQ after clearing Mode Register. Workarounds + * for End of DMA errata need to happen in DMA Mode. + */ + + dsprintk(NDEBUG_INTR, instance, "interrupt in DMA mode\n"); + + if (hostdata->connected) { + NCR5380_dma_complete(instance); + queue_work(hostdata->work_q, &hostdata->main_task); + } else { + NCR5380_write(MODE_REG, MR_BASE); + NCR5380_read(RESET_PARITY_INTERRUPT_REG); + } + } else if ((NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_mask) && (sr & (SR_SEL | SR_IO | SR_BSY | SR_RST)) == (SR_SEL | SR_IO)) { /* Probably reselected */ NCR5380_write(SELECT_ENABLE_REG, 0); @@ -1431,28 +1511,38 @@ static int NCR5380_transfer_dma(struct S register unsigned char p = *phase; register unsigned char *d = *data; unsigned char tmp; - int result; + int result = 0; if ((tmp = (NCR5380_read(STATUS_REG) & PHASE_MASK)) != p) { *phase = tmp; return -1; } - NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p)); + hostdata->connected->SCp.phase = p; - /* - * Note : on my sample board, watch-dog timeouts occurred when interrupts - * were not disabled for the duration of a single DMA transfer, from - * before the setting of DMA mode to after transfer of the last byte. - */ + if (p & SR_IO) { + if (hostdata->read_overruns) + c -= hostdata->read_overruns; + else if (hostdata->flags & FLAG_DMA_FIXUP) + --c; + } - if (hostdata->flags & FLAG_DMA_FIXUP) - NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY); - else - NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY | - MR_ENABLE_EOP_INTR); + dsprintk(NDEBUG_DMA, instance, "initializing DMA %s: length %d, address %p\n", + (p & SR_IO) ? "receive" : "send", c, d); - dprintk(NDEBUG_DMA, "scsi%d : mode reg = 0x%X\n", instance->host_no, NCR5380_read(MODE_REG)); + NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p)); + NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY | + MR_ENABLE_EOP_INTR); + + if (!(hostdata->flags & FLAG_LATE_DMA_SETUP)) { + /* On the Medusa, it is a must to initialize the DMA before + * starting the NCR. This is also the cleaner way for the TT. + */ + if (p & SR_IO) + result = NCR5380_dma_recv_setup(instance, d, c); + else + result = NCR5380_dma_send_setup(instance, d, c); + } /* * On the PAS16 at least I/O recovery delays are not needed here. @@ -1470,6 +1560,29 @@ static int NCR5380_transfer_dma(struct S NCR5380_io_delay(1); } + if (hostdata->flags & FLAG_LATE_DMA_SETUP) { + /* On the Falcon, the DMA setup must be done after the last + * NCR access, else the DMA setup gets trashed! + */ + if (p & SR_IO) + result = NCR5380_dma_recv_setup(instance, d, c); + else + result = NCR5380_dma_send_setup(instance, d, c); + } + + /* On failure, NCR5380_dma_xxxx_setup() returns a negative int. */ + if (result < 0) + return result; + + /* For real DMA, result is the byte count. DMA interrupt is expected. */ + if (result > 0) { + hostdata->dma_len = result; + return 0; + } + + /* The result is zero iff pseudo DMA send/receive was completed. */ + hostdata->dma_len = c; + /* * A note regarding the DMA errata workarounds for early NMOS silicon. * @@ -1504,10 +1617,8 @@ static int NCR5380_transfer_dma(struct S * request. */ - if (p & SR_IO) { - result = NCR5380_dma_recv_setup(instance, d, - hostdata->flags & FLAG_DMA_FIXUP ? c - 1 : c); - if (!result && (hostdata->flags & FLAG_DMA_FIXUP)) { + if (hostdata->flags & FLAG_DMA_FIXUP) { + if (p & SR_IO) { /* * The workaround was to transfer fewer bytes than we * intended to with the pseudo-DMA read function, wait for @@ -1533,11 +1644,8 @@ static int NCR5380_transfer_dma(struct S result = -1; shost_printk(KERN_ERR, instance, "PDMA read: !REQ timeout\n"); } - d[c - 1] = NCR5380_read(INPUT_DATA_REG); - } - } else { - result = NCR5380_dma_send_setup(instance, d, c); - if (!result && (hostdata->flags & FLAG_DMA_FIXUP)) { + d[*count - 1] = NCR5380_read(INPUT_DATA_REG); + } else { /* * Wait for the last byte to be sent. If REQ is being asserted for * the byte we're interested, we'll ACK it and it will go false. @@ -1550,11 +1658,8 @@ static int NCR5380_transfer_dma(struct S } } } - NCR5380_write(MODE_REG, MR_BASE); - NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE); - NCR5380_read(RESET_PARITY_INTERRUPT_REG); - *data = d + c; - *count = 0; + + NCR5380_dma_complete(instance); return result; } @@ -1667,8 +1772,7 @@ static void NCR5380_information_transfer do_abort(instance); cmd->result = DID_ERROR << 16; /* XXX - need to source or sink data here, as appropriate */ - } else - cmd->SCp.this_residual -= transfersize - len; + } } else { /* Break up transfer into 3 ms chunks, * presuming 6 accesses per handshake. Index: linux/drivers/scsi/arm/cumana_1.c =================================================================== --- linux.orig/drivers/scsi/arm/cumana_1.c 2016-03-21 13:31:25.000000000 +1100 +++ linux/drivers/scsi/arm/cumana_1.c 2016-03-21 13:31:27.000000000 +1100 @@ -20,6 +20,7 @@ #define NCR5380_dma_xfer_len(instance, cmd, phase) (cmd->transfersize) #define NCR5380_dma_recv_setup cumanascsi_pread #define NCR5380_dma_send_setup cumanascsi_pwrite +#define NCR5380_dma_residual(instance) (0) #define NCR5380_intr cumanascsi_intr #define NCR5380_queue_command cumanascsi_queue_command @@ -245,7 +246,7 @@ static int cumanascsi1_probe(struct expa host->irq = ec->irq; - ret = NCR5380_init(host, FLAG_DMA_FIXUP); + ret = NCR5380_init(host, FLAG_DMA_FIXUP | FLAG_LATE_DMA_SETUP); if (ret) goto out_unmap; Index: linux/drivers/scsi/arm/oak.c =================================================================== --- linux.orig/drivers/scsi/arm/oak.c 2016-03-21 13:31:25.000000000 +1100 +++ linux/drivers/scsi/arm/oak.c 2016-03-21 13:31:27.000000000 +1100 @@ -26,6 +26,7 @@ #define NCR5380_dma_xfer_len(instance, cmd, phase) (0) #define NCR5380_dma_recv_setup oakscsi_pread #define NCR5380_dma_send_setup oakscsi_pwrite +#define NCR5380_dma_residual(instance) (0) #define NCR5380_queue_command oakscsi_queue_command #define NCR5380_info oakscsi_info @@ -144,7 +145,7 @@ static int oakscsi_probe(struct expansio host->irq = NO_IRQ; host->n_io_port = 255; - ret = NCR5380_init(host, FLAG_DMA_FIXUP); + ret = NCR5380_init(host, FLAG_DMA_FIXUP | FLAG_LATE_DMA_SETUP); if (ret) goto out_unmap; Index: linux/drivers/scsi/dmx3191d.c =================================================================== --- linux.orig/drivers/scsi/dmx3191d.c 2016-03-21 13:31:21.000000000 +1100 +++ linux/drivers/scsi/dmx3191d.c 2016-03-21 13:31:27.000000000 +1100 @@ -42,6 +42,7 @@ #define NCR5380_dma_xfer_len(instance, cmd, phase) (0) #define NCR5380_dma_recv_setup(instance, dst, len) (0) #define NCR5380_dma_send_setup(instance, src, len) (0) +#define NCR5380_dma_residual(instance) (0) #define NCR5380_implementation_fields /* none */ Index: linux/drivers/scsi/dtc.h =================================================================== --- linux.orig/drivers/scsi/dtc.h 2016-03-21 13:31:21.000000000 +1100 +++ linux/drivers/scsi/dtc.h 2016-03-21 13:31:27.000000000 +1100 @@ -23,6 +23,7 @@ dtc_dma_xfer_len(cmd) #define NCR5380_dma_recv_setup dtc_pread #define NCR5380_dma_send_setup dtc_pwrite +#define NCR5380_dma_residual(instance) (0) #define NCR5380_intr dtc_intr #define NCR5380_queue_command dtc_queue_command Index: linux/drivers/scsi/g_NCR5380.h =================================================================== --- linux.orig/drivers/scsi/g_NCR5380.h 2016-03-21 13:31:21.000000000 +1100 +++ linux/drivers/scsi/g_NCR5380.h 2016-03-21 13:31:27.000000000 +1100 @@ -64,6 +64,7 @@ generic_NCR5380_dma_xfer_len(instance, cmd) #define NCR5380_dma_recv_setup generic_NCR5380_pread #define NCR5380_dma_send_setup generic_NCR5380_pwrite +#define NCR5380_dma_residual(instance) (0) #define NCR5380_intr generic_NCR5380_intr #define NCR5380_queue_command generic_NCR5380_queue_command Index: linux/drivers/scsi/mac_scsi.c =================================================================== --- linux.orig/drivers/scsi/mac_scsi.c 2016-03-21 13:31:21.000000000 +1100 +++ linux/drivers/scsi/mac_scsi.c 2016-03-21 13:31:27.000000000 +1100 @@ -37,6 +37,7 @@ macscsi_dma_xfer_len(instance, cmd) #define NCR5380_dma_recv_setup macscsi_pread #define NCR5380_dma_send_setup macscsi_pwrite +#define NCR5380_dma_residual(instance) (0) #define NCR5380_intr macscsi_intr #define NCR5380_queue_command macscsi_queue_command @@ -386,7 +387,7 @@ static int __init mac_scsi_probe(struct #endif host_flags |= setup_toshiba_delay > 0 ? FLAG_TOSHIBA_DELAY : 0; - error = NCR5380_init(instance, host_flags); + error = NCR5380_init(instance, host_flags | FLAG_LATE_DMA_SETUP); if (error) goto fail_init; Index: linux/drivers/scsi/pas16.h =================================================================== --- linux.orig/drivers/scsi/pas16.h 2016-03-21 13:31:21.000000000 +1100 +++ linux/drivers/scsi/pas16.h 2016-03-21 13:31:27.000000000 +1100 @@ -105,6 +105,7 @@ #define NCR5380_dma_xfer_len(instance, cmd, phase) (cmd->transfersize) #define NCR5380_dma_recv_setup pas16_pread #define NCR5380_dma_send_setup pas16_pwrite +#define NCR5380_dma_residual(instance) (0) #define NCR5380_intr pas16_intr #define NCR5380_queue_command pas16_queue_command Index: linux/drivers/scsi/t128.h =================================================================== --- linux.orig/drivers/scsi/t128.h 2016-03-21 13:31:21.000000000 +1100 +++ linux/drivers/scsi/t128.h 2016-03-21 13:31:27.000000000 +1100 @@ -79,6 +79,7 @@ #define NCR5380_dma_xfer_len(instance, cmd, phase) (cmd->transfersize) #define NCR5380_dma_recv_setup t128_pread #define NCR5380_dma_send_setup t128_pwrite +#define NCR5380_dma_residual(instance) (0) #define NCR5380_intr t128_intr #define NCR5380_queue_command t128_queue_command Index: linux/drivers/scsi/dtc.c =================================================================== --- linux.orig/drivers/scsi/dtc.c 2016-03-21 13:31:21.000000000 +1100 +++ linux/drivers/scsi/dtc.c 2016-03-21 13:31:27.000000000 +1100 @@ -228,7 +228,7 @@ found: instance->base = addr; ((struct NCR5380_hostdata *)(instance)->hostdata)->base = base; - if (NCR5380_init(instance, 0)) + if (NCR5380_init(instance, FLAG_LATE_DMA_SETUP)) goto out_unregister; NCR5380_maybe_reset_bus(instance); Index: linux/drivers/scsi/g_NCR5380.c =================================================================== --- linux.orig/drivers/scsi/g_NCR5380.c 2016-03-21 13:31:21.000000000 +1100 +++ linux/drivers/scsi/g_NCR5380.c 2016-03-21 13:31:27.000000000 +1100 @@ -466,7 +466,7 @@ static int __init generic_NCR5380_detect } #endif - if (NCR5380_init(instance, flags)) + if (NCR5380_init(instance, flags | FLAG_LATE_DMA_SETUP)) goto out_unregister; switch (overrides[current_override].board) { Index: linux/drivers/scsi/pas16.c =================================================================== --- linux.orig/drivers/scsi/pas16.c 2016-03-21 13:31:21.000000000 +1100 +++ linux/drivers/scsi/pas16.c 2016-03-21 13:31:27.000000000 +1100 @@ -375,7 +375,7 @@ static int __init pas16_detect(struct sc instance->io_port = io_port; - if (NCR5380_init(instance, FLAG_DMA_FIXUP)) + if (NCR5380_init(instance, FLAG_DMA_FIXUP | FLAG_LATE_DMA_SETUP)) goto out_unregister; NCR5380_maybe_reset_bus(instance); Index: linux/drivers/scsi/t128.c =================================================================== --- linux.orig/drivers/scsi/t128.c 2016-03-21 13:31:21.000000000 +1100 +++ linux/drivers/scsi/t128.c 2016-03-21 13:31:27.000000000 +1100 @@ -208,7 +208,7 @@ found: instance->base = base; ((struct NCR5380_hostdata *)instance->hostdata)->base = p; - if (NCR5380_init(instance, FLAG_DMA_FIXUP)) + if (NCR5380_init(instance, FLAG_DMA_FIXUP | FLAG_LATE_DMA_SETUP)) goto out_unregister; NCR5380_maybe_reset_bus(instance);