Starting kernel ... Uncompressing Linux... done, booting the kernel. Booting Linux on physical CPU 0x0 Linux version 3.14.52+ (ilya@ilya-pc) (gcc version 4.7.2 (Sourcery CodeBench Lite 2012.09-64) ) #8 SMP PREEMPT Mon Feb 15 14:55:08 IST 2016 CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: CompuLab SBC-iMX7 bootconsole [earlycon0] enabled cma: CMA: reserved 320 MiB at ac000000 Memory policy: Data cache writealloc PERCPU: Embedded 8 pages/cpu @ab735000 s8320 r8192 d16256 u32768 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096 Kernel command line: console=ttymxc0,115200 earlyprintk=ttymxc0,115200 root=/dev/nfs ip=dhcp nfsroot=192.168.11.24:/home/ilya/work/rootfs/sid-minbase,v3,tcp rw rootwait PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 700996K/1048576K available (6617K kernel code, 353K rwdata, 2280K rodata, 384K init, 421K bss, 347580K reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) vmalloc : 0xc0800000 - 0xff000000 (1000 MB) lowmem : 0x80000000 - 0xc0000000 (1024 MB) pkmap : 0x7fe00000 - 0x80000000 ( 2 MB) modules : 0x7f000000 - 0x7fe00000 ( 14 MB) .text : 0x80008000 - 0x808b8880 (8899 kB) .init : 0x808b9000 - 0x80919080 ( 385 kB) .data : 0x8091a000 - 0x80972680 ( 354 kB) .bss : 0x8097268c - 0x809dbc00 ( 422 kB) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Preemptible hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS:16 nr_irqs:16 16 Switching to timer-based delay loop sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655765682ns Architected cp15 timer(s) running at 8.00MHz (phys). sched_clock: 56 bits at 8MHz, resolution 125ns, wraps every 2147483648000ns Ignoring duplicate/late registration of read_current_timer delay Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) CPU: Testing write buffer coherency: ok /cpus/cpu@0 missing clock-frequency property /cpus/cpu@1 missing clock-frequency property CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x80647850 - 0x806478a8 Switching to timer-based delay loop Calibrating delay loop (skipped) already calibrated this CPU6.00 BogoMIPS (lpj=30000) sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655765682ns Architected cp15 timer(s) running at 8.00MHz (phys). 2147483648000ns Current pid: 1 comm: swapper/0 / Idle pid: 0 comm: swapper/0 Ignoring duplicate/late registra Booting Linux on physical CPU 0x0 Linux version 3.14.52+ (ilya@ilya-pc) (gcc version 4.7.2 (Sourcery CodeBench Lite 2012.09-64) ) #8 SMP PREEMPT Mon Feb 15 14:55:08 IST 2016 CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: CompuLab SBC-iMX7 bootconsole [earlycon0] enabled cma: CMA: reserved 320 MiB at ac000000 Memory policy: Data cache writealloc CPU1: failed to come online Brought up 1 CPUs SMP: Total of 1 processors activated (6.00 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 pinctrl core: initialized pinctrl subsystem regulator-dummy: no parameters NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor ladder cpuidle: using governor menu Use WDOG1 as reset source syscon 30340000.iomuxc-gpr: regmap [mem 0x30340000-0x3034ffff] registered syscon 30350000.ocotp-ctrl: regmap [mem 0x30350000-0x3035ffff] registered syscon 30360000.anatop: regmap [mem 0x30360000-0x3036ffff] registered vdd1p0d: 800 <--> 1200 mV at 1000 mV vdd1p2: 1100 <--> 1300 mV syscon 30390000.src: regmap [mem 0x30390000-0x3039ffff] registered DDR type is DDR3! failed to find ocotp node failed to find ocotp node hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. hw-breakpoint: maximum watchpoint size is 8 bytes. imx7d-pinctrl 302c0000.iomuxc-lpsr: initialized IMX pinctrl driver imx7d-pinctrl 30330000.iomuxc: initialized IMX pinctrl driver MU is ready for cross core communication! bio: create slab at 0 mxs-dma 33000000.dma-apbh: initialized usb_otg1_vbus: 5000 mV fec1_phy_nreset: 3300 mV platform regulator.15: Driver reg-fixed-voltage requests probe deferral tsc2046-reg: 3300 mV platform regulator.17: Driver reg-fixed-voltage requests probe deferral platform lcd_nstby_3v3.18: Driver reg-fixed-voltage requests probe deferral SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb usbphy_nop1.10 supply vcc not found, using dummy regulator usbphy_nop2.11 supply vcc not found, using dummy regulator i2c i2c-1: IMX I2C adapter registered i2c i2c-3: IMX I2C adapter registered Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PTP clock support registered MIPI CSI2 driver module loaded Advanced Linux Sound Architecture Driver Initialized. Switched to clocksource arch_sys_counter cfg80211: Calling CRDA to update world regulatory domain NET: Registered protocol family 2 TCP established hash table entries: 8192 (order: 3, 32768 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP: reno registered UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. imx rpmsg driver is registered. Bus freq driver module loaded futex hash table entries: 512 (order: 3, 32768 bytes) VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. fuse init (API version 7.22) msgmni has been set to 2009 io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) backlight.20 supply power not found, using dummy regulator MIPI DSI driver module loaded 30730000.lcdif supply lcd not found, using dummy regulator mxsfb 30730000.lcdif: failed to find mxc display driver Console: switching to colour frame buffer device 100x30 mxsfb 30730000.lcdif: initialized imx-sdma 30bd0000.sdma: no event needs to be remapped imx-sdma 30bd0000.sdma: loaded firmware 4.1 imx-sdma 30bd0000.sdma: initialized pfuze100-regulator 1-0008: Full layer: 1, Metal layer: 1 pfuze100-regulator 1-0008: FAB: 0, FIN: 0 pfuze100-regulator 1-0008: pfuze3000 found. SW1A: 700 <--> 3300 mV at 1100 mV SW1B: 700 <--> 1475 mV at 1000 mV SW2: 1500 <--> 1850 mV at 1800 mV SW3: 900 <--> 1650 mV at 1350 mV SWBST: 5000 <--> 5150 mV at 5000 mV VSNVS: 1000 <--> 3000 mV at 3000 mV VREFDDR: 750 mV VLDO1: 1800 <--> 3300 mV at 1800 mV VLDO2: 800 <--> 1550 mV at 1500 mV VCCSD: 2850 <--> 3300 mV at 3300 mV V33: 2850 <--> 3300 mV at 3300 mV VLDO3: 1800 <--> 3300 mV at 3300 mV VLDO4: 1800 <--> 3300 mV at 3300 mV Serial: IMX driver 30860000.serial: ttymxc0 at MMIO 0x30860000 (irq = 58, base_baud = 1500000) is a IMX console [ttymxc0] enabled bootconsole [earlycon0] disabled serial: Freescale lpuart driver imx sema4 driver is registered. [drm] Initialized drm 1.1.0 20060810 [drm] Initialized vivante 1.0.0 20120216 on minor 0 brd: module loaded loop: module loaded at24 1-0050: 1024 byte 24c08 EEPROM, writable, 16 bytes/write m25p80 spi0.1: m25px16 (2048 Kbytes) 3 ofpart partitions found on MTD device spi0.1 Creating 3 MTD partitions on "spi0.1": 0x000000000000-0x0000000c0000 : "uboot" 0x0000000c0000-0x000000100000 : "uboot environment" 0x000000100000-0x000000200000 : "splash" spi_imx 30820000.ecspi: probed 30be0000.ethernet supply phy not found, using dummy regulator pps pps0: new PPS source ptp0 libphy: fec_enet_mii_bus: probed fec 30be0000.ethernet eth0: registered PHC device 0 30bf0000.ethernet supply phy not found, using dummy regulator pps pps1: new PPS source ptp1 fec 30bf0000.ethernet (unregistered net_device): Invalid MAC address: 00:00:00:00:00:00 fec 30bf0000.ethernet (unregistered net_device): Using random MAC address: c2:a3:b7:db:4d:b0 fec 30bf0000.ethernet eth1: registered PHC device 1 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-mxc: Freescale On-Chip EHCI Host driver usbcore: registered new interface driver usb-storage 30b10200.usbmisc supply vbus-wakeup not found, using dummy regulator 30b20200.usbmisc supply vbus-wakeup not found, using dummy regulator 30b30200.usbmisc supply vbus-wakeup not found, using dummy regulator 30b20000.usb supply vbus not found, using dummy regulator ci_hdrc ci_hdrc.1: EHCI Host Controller ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected imx_usb 30b30000.usb: Can't register ci_hdrc platform device, err=-517 platform 30b30000.usb: Driver imx_usb requests probe deferral mousedev: PS/2 mouse device common for all mice input: 30370000.snvs-pwrkey as /devices/soc.3/30000000.aips-bus/30370000.snvs-pwrkey/input/input0 snvs_pwrkey 30370000.snvs-pwrkey: i.MX snvs powerkey probed rtc-em3027 1-0056: rtc core: registered rtc-em3027 as rtc0 snvs_rtc 30370034.snvs-rtc-lp: rtc core: registered 30370034.snvs-rtc-l as rtc1 i2c /dev entries driver IR NEC protocol handler initialized IR RC5(x) protocol handler initialized IR RC6 protocol handler initialized IR JVC protocol handler initialized IR Sony protocol handler initialized IR RC5 (streamzap) protocol handler initialized IR SANYO protocol handler initialized IR MCE Keyboard/mouse protocol handler initialized imx2-wdt 30280000.wdog: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=0) sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper sdhci-esdhc-imx 30b40000.usdhc: could not get ultra high speed state, work on normal mode mmc0: no vqmmc regulator found mmc0: no vmmc regulator found mmc0: SDHCI controller on 30b40000.usdhc [30b40000.usdhc] using ADMA sdhci-esdhc-imx 30b60000.usdhc: could not get ultra high speed state, work on normal mode mmc2: no vqmmc regulator found mmc2: no vmmc regulator found mmc0: new high speed SDHC card at address e624 mmc2: SDHCI controller on 30b60000.usdhc [30b60000.usdhc] using ADMA mmcblk0: mmc0:e624 SS08G 7.40 GiB usbcore: registered new interface driver usbhid usbhid: USB HID core driver mmcblk0: unknown partition table TCP: cubic registered NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 Key type dns_resolver registered usb 1-1: new high-speed USB device number 2 using ci_hdrc Registering SWP/SWPB emulation handler SWBST: disabling usb_otg1_vbus: disabling regulator-dummy: disabling imx mcc test is registered. fec2_phy_nreset: 3300 mV usb_host_nreset: 3300 mV lcd_nstby_3v3: no parameters ci_hdrc ci_hdrc.2: EHCI Host Controller ci_hdrc ci_hdrc.2: new USB bus registered, assigned bus number 2 mmc2: BKOPS_EN bit is not set mmc2: new high speed DDR MMC card at address 0001 mmcblk2: mmc2:0001 SEM04G 3.68 GiB mmcblk2boot0: mmc2:0001 SEM04G partition 1 2.00 MiB mmcblk2boot1: mmc2:0001 SEM04G partition 2 2.00 MiB mmcblk2rpmb: mmc2:0001 SEM04G partition 3 2.00 MiB mmcblk2: unknown partition table mmcblk2boot1: unknown partition table mmcblk2boot0: unknown partition table ci_hdrc ci_hdrc.2: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected Number of LUNs=8 Mass Storage Function, version: 2009/09/11 LUN: removable file: (no medium) usb-storage 1-1:1.0: USB Mass Storage device detected scsi0 : usb-storage 1-1:1.0 Number of LUNs=1 no file given for LUN0 g_mass_storage ci_hdrc.0: failed to start g_mass_storage: -22 rtc-em3027 1-0056: setting system clock to 2016-02-16 07:32:51 UTC (1455607971) fec 30be0000.ethernet eth0: Freescale FEC PHY driver [Atheros 8031 ethernet] (mii_bus:phy_addr=30be0000.etherne:00, irq=-1) IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready fec 30bf0000.ethernet eth1: Freescale FEC PHY driver [Atheros 8031 ethernet] (mii_bus:phy_addr=30be0000.etherne:01, irq=-1) usb 2-1: new high-speed USB device number 2 using ci_hdrc IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready hub 2-1:1.0: USB hub found hub 2-1:1.0: 3 ports detected scsi 0:0:0:0: Direct-Access SanDisk Cruzer Slice 1.14 PQ: 0 ANSI: 2 sd 0:0:0:0: [sda] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] No Caching mode page found sd 0:0:0:0: [sda] Assuming drive cache: write through sd 0:0:0:0: [sda] No Caching mode page found sd 0:0:0:0: [sda] Assuming drive cache: write through sda: unknown partition table sd 0:0:0:0: [sda] No Caching mode page found sd 0:0:0:0: [sda] Assuming drive cache: write through sd 0:0:0:0: [sda] Attached SCSI removable disk libphy: 30be0000.etherne:00 - Link is Up - 1000/Full IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Sending DHCP requests ., OK IP-Config: Got DHCP answer from 10.1.1.240, my address is 192.168.27.43 IP-Config: Complete: device=eth0, hwaddr=00:01:c0:1a:e9:13, ipaddr=192.168.27.43, mask=255.255.0.0, gw=192.168.0.110 host=192.168.27.43, domain=compulab.local, nis-domain=(none) bootserver=10.1.1.247, rootserver=192.168.11.24, rootpath= nameserver0=192.168.10.13, nameserver1=10.1.1.247 ALSA device list: No soundcards found. VFS: Mounted root (nfs filesystem) on device 0:13. devtmpfs: mounted Freeing unused kernel memory: 384K (808b9000 - 80919000) random: systemd urandom read with 58 bits of entropy available systemd[1]: systemd 228 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux stretch/sid!