This patch declares the i2c audio codec and initialise audio.
It's adding the alc5621 codec in the i2c board info and is calling
kirkwood_audio_init() to initialize kirkwood audio.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Index: sound-2.6/arch/arm/mach-kirkwood/t5325-setup.c
===================================================================
--- sound-2.6.orig/arch/arm/mach-kirkwood/t5325-setup.c	2010-10-13 20:27:11.000000000 +0200
+++ sound-2.6/arch/arm/mach-kirkwood/t5325-setup.c	2010-10-13 20:48:58.000000000 +0200
@@ -23,6 +23,7 @@
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
+#include <sound/alc5623.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
@@ -134,6 +135,7 @@
 	MPP33_GE1_TXCTL,
 	MPP39_AU_I2SBCLK,
 	MPP40_AU_I2SDO,
+	MPP43_AU_I2SDI,
 	MPP41_AU_I2SLRCLK,
 	MPP42_AU_I2SMCLK,
 	MPP45_GPIO,		/* Power button */
@@ -141,6 +143,18 @@
 	0
 };
 
+static struct alc5623_platform_data alc5621_data = {
+	.add_ctrl = 0x3700,
+	.jack_det_ctrl = 0x4810,
+};
+
+static struct i2c_board_info i2c_board_info[] __initdata = {
+	{
+		I2C_BOARD_INFO("alc5621", 0x1a),
+		.platform_data = &alc5621_data,
+	},
+};
+
 #define HP_T5325_GPIO_POWER_OFF		48
 
 static void hp_t5325_power_off(void)
@@ -166,6 +180,9 @@
 	kirkwood_ehci_init();
 	platform_device_register(&hp_t5325_button_device);
 
+	i2c_register_board_info(0, i2c_board_info, ARRAY_SIZE(i2c_board_info));
+	kirkwood_audio_init();
+
 	if (gpio_request(HP_T5325_GPIO_POWER_OFF, "power-off") == 0 &&
 	    gpio_direction_output(HP_T5325_GPIO_POWER_OFF, 0) == 0)
 		pm_power_off = hp_t5325_power_off;