Current code doesn't really enable the usb clocks so if they're disabled
when booting linux, the kernel/machine will hang as soon as someone is trying
to read a usb register

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Index: tst-usb/arch/arm/mach-mx5/clock-mx51-mx53.c
===================================================================
--- tst-usb.orig/arch/arm/mach-mx5/clock-mx51-mx53.c	2010-12-20 15:38:40.000000000 +0100
+++ tst-usb/arch/arm/mach-mx5/clock-mx51-mx53.c	2010-12-20 15:40:10.000000000 +0100
@@ -954,6 +954,41 @@
 	.parent = &pll2_sw_clk,
 	.get_rate = clk_usboh3_get_rate,
 	.set_parent = clk_usboh3_set_parent,
+	.enable = _clk_ccgr_enable,
+	.disable = _clk_ccgr_disable,
+	.enable_reg = MXC_CCM_CCGR2,
+	.enable_shift = MXC_CCM_CCGRx_CG14_OFFSET,
+};
+
+static struct clk usb_ahb_clk = {
+	.parent = &ipg_clk,
+	.enable = _clk_ccgr_enable,
+	.disable = _clk_ccgr_disable,
+	.enable_reg = MXC_CCM_CCGR2,
+	.enable_shift = MXC_CCM_CCGRx_CG13_OFFSET,
+};
+
+static int clk_usb_phy1_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 reg;
+
+	reg = __raw_readl(MXC_CCM_CSCMR1) & ~MXC_CCM_CSCMR1_USB_PHY_CLK_SEL;
+
+	if (parent == &pll3_sw_clk)
+		reg |= 1 << MXC_CCM_CSCMR1_USB_PHY_CLK_SEL_OFFSET;
+
+	__raw_writel(reg, MXC_CCM_CSCMR1);
+
+	return 0;
+}
+
+static struct clk usb_phy1_clk = {
+	.parent = &pll3_sw_clk,
+	.set_parent = clk_usb_phy1_set_parent,
+	.enable = _clk_ccgr_enable,
+	.enable_reg = MXC_CCM_CCGR2,
+	.enable_shift = MXC_CCM_CCGRx_CG0_OFFSET,
+	.disable = _clk_ccgr_disable,
 };
 
 /* eCSPI */
@@ -1094,9 +1129,12 @@
 	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
 	_REGISTER_CLOCK("imx-i2c.2", NULL, hsi2c_clk)
 	_REGISTER_CLOCK("mxc-ehci.0", "usb", usboh3_clk)
-	_REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", ahb_clk)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_ahb_clk)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb_phy1", usb_phy1_clk)
 	_REGISTER_CLOCK("mxc-ehci.1", "usb", usboh3_clk)
-	_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", ahb_clk)
+	_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_ahb_clk)
+	_REGISTER_CLOCK("mxc-ehci.2", "usb", usboh3_clk)
+	_REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_ahb_clk)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usboh3_clk)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", ahb_clk)
 	_REGISTER_CLOCK("imx-keypad.0", NULL, kpp_clk)
@@ -1170,6 +1208,9 @@
 	mx51_revision();
 	clk_disable(&iim_clk);
 
+	/* move usb_phy_clk to 24MHz */
+	clk_set_parent(&usb_phy1_clk, &osc_clk);
+
 	/* set the usboh3_clk parent to pll2_sw_clk */
 	clk_set_parent(&usboh3_clk, &pll2_sw_clk);
 
Index: tst-usb/drivers/usb/host/ehci-mxc.c
===================================================================
--- tst-usb.orig/drivers/usb/host/ehci-mxc.c	2010-12-20 15:38:43.000000000 +0100
+++ tst-usb/drivers/usb/host/ehci-mxc.c	2010-12-20 15:40:10.000000000 +0100
@@ -28,7 +28,7 @@
 #define ULPI_VIEWPORT_OFFSET	0x170
 
 struct ehci_mxc_priv {
-	struct clk *usbclk, *ahbclk;
+	struct clk *usbclk, *ahbclk, *phy1clk;
 	struct usb_hcd *hcd;
 };
 
@@ -168,17 +168,6 @@
 		goto err_ioremap;
 	}
 
-	/* call platform specific init function */
-	if (pdata->init) {
-		ret = pdata->init(pdev);
-		if (ret) {
-			dev_err(dev, "platform init failed\n");
-			goto err_init;
-		}
-		/* platforms need some time to settle changed IO settings */
-		mdelay(10);
-	}
-
 	/* enable clocks */
 	priv->usbclk = clk_get(dev, "usb");
 	if (IS_ERR(priv->usbclk)) {
@@ -196,6 +185,28 @@
 		clk_enable(priv->ahbclk);
 	}
 
+	/* "dr" device has its own clock */
+	if (pdev->id == 0) {
+		priv->phy1clk = clk_get(dev, "usb_phy1");
+		if (IS_ERR(priv->phy1clk)) {
+			ret = PTR_ERR(priv->phy1clk);
+			goto err_clk_phy;
+		}
+		clk_enable(priv->phy1clk);
+	}
+
+
+	/* call platform specific init function */
+	if (pdata->init) {
+		ret = pdata->init(pdev);
+		if (ret) {
+			dev_err(dev, "platform init failed\n");
+			goto err_init;
+		}
+		/* platforms need some time to settle changed IO settings */
+		mdelay(10);
+	}
+
 	/* setup specific usb hw */
 	ret = mxc_initialize_usb_hw(pdev->id, pdata->flags);
 	if (ret < 0)
@@ -233,6 +244,11 @@
 	if (pdata && pdata->exit)
 		pdata->exit(pdev);
 err_init:
+	if (priv->phy1clk) {
+		clk_disable(priv->phy1clk);
+		clk_put(priv->phy1clk);
+	}
+err_clk_phy:
 	if (priv->ahbclk) {
 		clk_disable(priv->ahbclk);
 		clk_put(priv->ahbclk);
@@ -276,6 +292,10 @@
 		clk_disable(priv->ahbclk);
 		clk_put(priv->ahbclk);
 	}
+	if (priv->phy1clk) {
+		clk_disable(priv->phy1clk);
+		clk_put(priv->phy1clk);
+	}
 
 	kfree(priv);