[ 0.000000] Linux version 2.6.33-rc2-00332-g244c196-dirty (mcuelenaere@wim2160) (gcc version 4.3.3 (GCC) ) #41 PREEMPT Sat Jan 16 02:17:53 CET 2010 [ 0.000000] CPU: ARMv6-compatible processor [410fb766] revision 6 (ARMv7), cr=00c5387f [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] Machine: SmartQ 7 [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] On node 0 totalpages: 32768 [ 0.000000] free_area_init_node: node 0, pgdat c0483bac, node_mem_map c04fc000 [ 0.000000] Normal zone: 256 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 32512 pages, LIFO batch:7 [ 0.000000] CPU S3C6410 (id 0x36410101) [ 0.000000] s3c6410_init_clocks: initialising clocks [ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics [ 0.000000] s3c6400_setup_clocks: registering clocks [ 0.000000] s3c6400_setup_clocks: clkdiv0 = 01043310 [ 0.000000] s3c6400_setup_clocks: xtal is 12000000 [ 0.000000] S3C64XX: PLL settings, A=666000000, M=532000000, E=96000000 [ 0.000000] S3C64XX: HCLK2=266000000, HCLK=133000000, PCLK=66500000 [ 0.000000] mout_apll: source is fout_apll (1), rate is 666000000 [ 0.000000] mout_epll: source is epll (1), rate is 96000000 [ 0.000000] mout_mpll: source is mpll (1), rate is 532000000 [ 0.000000] mmc_bus: source is mout_epll (0), rate is 32000000 [ 0.000000] mmc_bus: source is mout_epll (0), rate is 32000000 [ 0.000000] mmc_bus: source is mout_epll (0), rate is 32000000 [ 0.000000] usb-bus-host: source is mout_epll (1), rate is 48000000 [ 0.000000] s3c64xx_clk_doutmpll_get_rate: parent is 532000000 [ 0.000000] uclk1: source is dout_mpll (1), rate is 66500000 [ 0.000000] spi-bus: source is mout_epll (0), rate is 48000000 [ 0.000000] spi-bus: source is mout_epll (0), rate is 48000000 [ 0.000000] audio-bus: source is mout_epll (0), rate is 48000000 [ 0.000000] audio-bus: source is mout_epll (0), rate is 48000000 [ 0.000000] irda-bus: source is mout_epll (0), rate is 48000000 [ 0.000000] camera: source is hclk2 (0), rate is 266000000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: loglevel=6 rootwait console=ttySAC0,115200n8 ignore_loglevel root=/dev/mmcblk1p1 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 128MB = 128MB total [ 0.000000] Memory: 124672KB available (4220K code, 704K data, 140K init, 0K highmem) [ 0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:246 [ 0.000000] s3c64xx_init_irq: initialising interrupts [ 0.000000] VIC @f4000000: id 0x00041192, vendor 0x41 [ 0.000000] VIC @f4010000: id 0x00041192, vendor 0x41 [ 0.000000] timer tcon=00000000, tcnt 1b0f0, tcfg 00000201,00010000, usec 00001719 [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [ttySAC0] enabled [ 0.010000] Calibrating delay loop... 665.19 BogoMIPS (lpj=3325952) [ 0.240000] Mount-cache hash table entries: 512 [ 0.240000] CPU: Testing write buffer coherency: ok [ 0.250000] regulator: core version 0.5 [ 0.250000] NET: Registered protocol family 16 [ 0.370000] s3c64xx_dma_init: Registering DMA channels [ 0.370000] s3c64xx_dma_init1: registering DMA 0 (c8808100) [ 0.370000] s3c64xx_dma_init1: registering DMA 1 (c8808120) [ 0.380000] s3c64xx_dma_init1: registering DMA 2 (c8808140) [ 0.380000] s3c64xx_dma_init1: registering DMA 3 (c8808160) [ 0.390000] s3c64xx_dma_init1: registering DMA 4 (c8808180) [ 0.400000] s3c64xx_dma_init1: registering DMA 5 (c88081a0) [ 0.400000] s3c64xx_dma_init1: registering DMA 6 (c88081c0) [ 0.410000] s3c64xx_dma_init1: registering DMA 7 (c88081e0) [ 0.410000] PL080: IRQ 73, at c8808000 [ 0.420000] s3c64xx_dma_init1: registering DMA 8 (c880c100) [ 0.420000] s3c64xx_dma_init1: registering DMA 9 (c880c120) [ 0.430000] s3c64xx_dma_init1: registering DMA 10 (c880c140) [ 0.430000] s3c64xx_dma_init1: registering DMA 11 (c880c160) [ 0.440000] s3c64xx_dma_init1: registering DMA 12 (c880c180) [ 0.440000] s3c64xx_dma_init1: registering DMA 13 (c880c1a0) [ 0.450000] s3c64xx_dma_init1: registering DMA 14 (c880c1c0) [ 0.460000] s3c64xx_dma_init1: registering DMA 15 (c880c1e0) [ 0.460000] PL080: IRQ 74, at c880c000 [ 0.460000] S3C6410: Initialising architecture [ 0.470000] s3c24xx-pwm s3c24xx-pwm.1: tin at 33250000, tdiv at 33250000, tin=divclk, base 8 [ 0.480000] s3c-adc s3c64xx-adc: attached adc driver [ 0.530000] bio: create slab at 0 [ 0.530000] SCSI subsystem initialized [ 0.530000] usbcore: registered new interface driver usbfs [ 0.540000] usbcore: registered new interface driver hub [ 0.540000] usbcore: registered new device driver usb [ 0.560000] cfg80211: Calling CRDA to update world regulatory domain [ 0.580000] NET: Registered protocol family 2 [ 0.580000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.590000] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.590000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 0.600000] TCP: Hash tables configured (established 4096 bind 4096) [ 0.610000] TCP reno registered [ 0.610000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.620000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.620000] NET: Registered protocol family 1 [ 0.680000] DLM (built Jan 14 2010 00:10:00) installed [ 0.690000] msgmni has been set to 243 [ 0.690000] alg: No test for stdrng (krng) [ 0.690000] io scheduler noop registered [ 0.690000] io scheduler deadline registered [ 0.700000] io scheduler cfq registered (default) [ 0.730000] Console: switching to colour frame buffer device 100x30 [ 0.750000] s3c-fb s3c-fb: window 0: fb [ 1.650000] s3c6400-uart.0: s3c2410_serial0 at MMIO 0x7f005000 (irq = 16) is a S3C6400/10 [ 1.650000] s3c6400-uart.1: s3c2410_serial1 at MMIO 0x7f005400 (irq = 20) is a S3C6400/10 [ 1.660000] s3c6400-uart.2: s3c2410_serial2 at MMIO 0x7f005800 (irq = 24) is a S3C6400/10 [ 1.670000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.680000] s3c2410-ohci s3c2410-ohci: S3C24XX OHCI [ 1.680000] s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1 [ 1.690000] s3c2410-ohci s3c2410-ohci: irq 79, io mem 0x74300000 [ 1.750000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.750000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.760000] usb usb1: Product: S3C24XX OHCI [ 1.760000] usb usb1: Manufacturer: Linux 2.6.33-rc2-00332-g244c196-dirty ohci_hcd [ 1.770000] usb usb1: SerialNumber: s3c24xx [ 1.780000] hub 1-0:1.0: USB hub found [ 1.780000] hub 1-0:1.0: 2 ports detected [ 1.780000] Initializing USB Mass Storage driver... [ 1.790000] usbcore: registered new interface driver usb-storage [ 1.790000] USB Mass Storage support registered. [ 1.800000] s3c-hsotg s3c-hsotg: regs c8820000, irq 90 [ 1.800000] s3c-hsotg s3c-hsotg: GRXFSIZ=0x00001800, GNPTXFSIZ=0x18001800 [ 1.810000] s3c-hsotg s3c-hsotg: DCFG=0x00200000, DCTL=0x00000000, DIEPMSK=0000000f [ 1.820000] s3c-hsotg s3c-hsotg: GAHBCFG=0x00000000, 0x44=0x00000000 [ 1.820000] s3c-hsotg s3c-hsotg: GRXFSIZ=0x00000800, GNPTXFSIZ=0x01c00800 [ 1.830000] s3c-hsotg s3c-hsotg: DPTx[1] FSize=768, StAddr=0x00001000 [ 1.840000] s3c-hsotg s3c-hsotg: DPTx[2] FSize=768, StAddr=0x00003300 [ 1.840000] s3c-hsotg s3c-hsotg: DPTx[3] FSize=768, StAddr=0x00003600 [ 1.850000] s3c-hsotg s3c-hsotg: DPTx[4] FSize=768, StAddr=0x00003900 [ 1.860000] s3c-hsotg s3c-hsotg: DPTx[5] FSize=768, StAddr=0x00003c00 [ 1.860000] s3c-hsotg s3c-hsotg: DPTx[6] FSize=768, StAddr=0x00003f00 [ 1.870000] s3c-hsotg s3c-hsotg: DPTx[7] FSize=768, StAddr=0x00004200 [ 1.870000] s3c-hsotg s3c-hsotg: DPTx[8] FSize=768, StAddr=0x00004500 [ 1.880000] s3c-hsotg s3c-hsotg: DPTx[9] FSize=768, StAddr=0x00004800 [ 1.890000] s3c-hsotg s3c-hsotg: DPTx[10] FSize=768, StAddr=0x00004b00 [ 1.890000] s3c-hsotg s3c-hsotg: DPTx[11] FSize=768, StAddr=0x00004e00 [ 1.900000] s3c-hsotg s3c-hsotg: DPTx[12] FSize=768, StAddr=0x00005100 [ 1.910000] s3c-hsotg s3c-hsotg: DPTx[13] FSize=768, StAddr=0x00005400 [ 1.910000] s3c-hsotg s3c-hsotg: DPTx[14] FSize=768, StAddr=0x00005700 [ 1.920000] s3c-hsotg s3c-hsotg: DPTx[15] FSize=768, StAddr=0x00005a00 [ 1.930000] s3c-hsotg s3c-hsotg: ep0-in: EPCTL=0x00008000, SIZ=0x00000000, DMA=0x00000000 [ 1.930000] s3c-hsotg s3c-hsotg: ep0-out: EPCTL=0x00008000, SIZ=0x00000000, DMA=0x00000000 [ 1.940000] s3c-hsotg s3c-hsotg: ep1-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 [ 1.950000] s3c-hsotg s3c-hsotg: ep1-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 [ 1.960000] s3c-hsotg s3c-hsotg: ep2-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 [ 1.970000] s3c-hsotg s3c-hsotg: ep2-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 [ 1.980000] s3c-hsotg s3c-hsotg: ep3-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 [ 1.980000] s3c-hsotg s3c-hsotg: ep3-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 [ 1.990000] s3c-hsotg s3c-hsotg: ep4-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 [ 2.000000] s3c-hsotg s3c-hsotg: ep4-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 [ 2.010000] s3c-hsotg s3c-hsotg: ep5-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 [ 2.020000] s3c-hsotg s3c-hsotg: ep5-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 [ 2.020000] s3c-hsotg s3c-hsotg: ep6-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 [ 2.030000] s3c-hsotg s3c-hsotg: ep6-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 [ 2.040000] s3c-hsotg s3c-hsotg: ep7-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 [ 2.050000] s3c-hsotg s3c-hsotg: ep7-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 [ 2.060000] s3c-hsotg s3c-hsotg: ep8-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 [ 2.070000] s3c-hsotg s3c-hsotg: ep8-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 [ 2.070000] s3c-hsotg s3c-hsotg: ep9-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 [ 2.080000] s3c-hsotg s3c-hsotg: ep9-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 [ 2.090000] s3c-hsotg s3c-hsotg: ep10-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 [ 2.100000] s3c-hsotg s3c-hsotg: ep10-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 [ 2.110000] s3c-hsotg s3c-hsotg: ep11-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 [ 2.110000] s3c-hsotg s3c-hsotg: ep11-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 [ 2.120000] s3c-hsotg s3c-hsotg: ep12-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 [ 2.130000] s3c-hsotg s3c-hsotg: ep12-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 [ 2.140000] s3c-hsotg s3c-hsotg: ep13-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 [ 2.150000] s3c-hsotg s3c-hsotg: ep13-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 [ 2.160000] s3c-hsotg s3c-hsotg: ep14-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 [ 2.160000] s3c-hsotg s3c-hsotg: ep14-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000 [ 2.170000] s3c-hsotg s3c-hsotg: DVBUSDIS=0x000017d7, DVBUSPULSE=000005b8 [ 2.180000] g_serial gadget: Gadget Serial v2.4 [ 2.180000] g_serial gadget: g_serial ready [ 2.190000] s3c-hsotg s3c-hsotg: EP0: DIEPCTL0=0x00008000, DOEPCTL0=0x00008000 [ 2.200000] s3c-hsotg s3c-hsotg: DCTL=0x00000002 [ 2.200000] s3c-hsotg s3c-hsotg: EP0: DIEPCTL0=0x00008000, DOEPCTL0=0x80008000 [ 2.210000] s3c-hsotg s3c-hsotg: S3C_GINTSTS_USBSusp [ 2.210000] s3c-hsotg s3c-hsotg: s3c_hsotg_irq: USBRst [ 2.220000] s3c-hsotg s3c-hsotg: GNPTXSTS=000801c0 [ 2.220000] s3c-hsotg s3c-hsotg: bound driver g_serial [ 2.230000] mice: PS/2 mouse device common for all mice [ 2.230000] input: gpio-keys as /devices/platform/gpio-keys.0/input/input0 [ 2.240000] i2c /dev entries driver [ 2.250000] i2c-gpio i2c-gpio.0: using pins 139 (SDA) and 138 (SCL) [ 2.250000] APM Battery Driver [ 2.250000] cpuidle: using governor ladder [ 2.260000] s3c-hsotg s3c-hsotg: new device is high-speed [ 2.260000] s3c-hsotg s3c-hsotg: S3C_GINTSTS_USBSusp [ 2.270000] sdhci: Secure Digital Host Controller Interface driver [ 2.270000] sdhci: Copyright(c) Pierre Ossman [ 2.280000] s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133000000 Hz) [ 2.280000] s3c-sdhci s3c-sdhci.1: clock source 1: hsmmc (133000000 Hz) [ 2.290000] s3c-sdhci s3c-sdhci.1: clock source 2: mmc_bus (32000000 Hz) [ 2.300000] Registered led device: mmc0:: [ 2.300000] mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using PIO [ 2.310000] s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133000000 Hz) [ 2.310000] s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133000000 Hz) [ 2.320000] s3c-sdhci s3c-sdhci.0: clock source 2: mmc_bus (32000000 Hz) [ 2.330000] Registered led device: mmc1:: [ 2.330000] mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using PIO [ 2.340000] s3c-sdhci s3c-sdhci.2: clock source 0: hsmmc (133000000 Hz) [ 2.350000] s3c-sdhci s3c-sdhci.2: clock source 1: hsmmc (133000000 Hz) [ 2.350000] s3c-sdhci s3c-sdhci.2: clock source 2: mmc_bus (32000000 Hz) [ 2.360000] mmc0: Minimum clock frequency too high for identification mode [ 2.370000] s3c6410_setup_sdhci0_cfg_card: CTRL 2=c0004100, 3=80808080 [ 2.370000] Registered led device: mmc2:: [ 2.380000] mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using PIO [ 2.380000] Registered led device: red [ 2.390000] Registered led device: green [ 2.400000] Advanced Linux Sound Architecture Driver Version 1.0.21. [ 2.400000] ALSA device list: [ 2.400000] No soundcards found. [ 2.410000] TCP cubic registered [ 2.410000] NET: Registered protocol family 17 [ 2.410000] SCTP: Hash tables configured (established 4096 bind 8192) [ 2.420000] lib80211: common routines for IEEE802.11 drivers [ 2.420000] lib80211_crypt: registered algorithm 'NULL' [ 2.430000] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5 [ 2.440000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.440000] Waiting for root device /dev/mmcblk1p1... [ 2.490000] s3c6410_setup_sdhci0_cfg_card: CTRL 2=c0004100, 3=00008080 [ 2.490000] mmc0: new high speed SD card at address d555 [ 2.500000] blk_queue_max_sectors: set to minimum 8 [ 2.500000] mmcblk0: mmc0:d555 ST01G 979 MiB [ 2.510000] mmcblk0: p1 p2 p3 [ 2.540000] mmc1: Minimum clock frequency too high for identification mode [ 2.540000] s3c6410_setup_sdhci0_cfg_card: CTRL 2=c0004100, 3=80808080 [ 2.580000] s3c6410_setup_sdhci0_cfg_card: CTRL 2=c0004100, 3=00008080 [ 2.580000] mmc1: new high speed SD card at address 0002 [ 2.590000] blk_queue_max_sectors: set to minimum 8 [ 2.590000] s3c-hsotg s3c-hsotg: s3c_hsotg_irq: USBRst [ 2.600000] s3c-hsotg s3c-hsotg: GNPTXSTS=000801c0 [ 2.600000] mmcblk1: mmc1:0002 00000 1.90 GiB [ 2.610000] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 2.610000] mmcblk1: p1 p2 [ 2.640000] mmc2: Minimum clock frequency too high for identification mode [ 2.640000] s3c6410_setup_sdhci0_cfg_card: CTRL 2=c0004100, 3=80808080 [ 2.640000] s3c-hsotg s3c-hsotg: new device is full-speed [ 2.680000] EXT3-fs (mmcblk1p1): mounted filesystem with writeback data mode [ 2.680000] VFS: Mounted root (ext3 filesystem) readonly on device 179:9. [ 2.690000] Freeing init memory: 140K [ 2.690000] kjournald starting. Commit interval 5 seconds [ 2.700000] s3c-hsotg s3c-hsotg: s3c_hsotg_irq: USBRst [ 2.700000] s3c-hsotg s3c-hsotg: GNPTXSTS=010801c0 [ 2.720000] s3c6410_setup_sdhci0_cfg_card: CTRL 2=c0004100, 3=00008080 [ 2.720000] mmc2: new SDIO card at address 0001 [ 2.750000] s3c-hsotg s3c-hsotg: new device is full-speed [ 2.800000] s3c-hsotg s3c-hsotg: new address 2 [ 2.830000] s3c-hsotg s3c-hsotg: s3c_hsotg_rx_data: FIFO 8 bytes on ep0 but no req (DxEPCTl=0x00028000) [ 5.010000] hub 1-0:1.0: connect-debounce failed, port 2 disabled [ 7.440000] hub 1-0:1.0: connect-debounce failed, port 2 disabled [ 7.830000] s3c-hsotg s3c-hsotg: s3c_hsotg_rx_data: FIFO 8 bytes on ep0 but no req (DxEPCTl=0x00028000) [ 9.940000] hub 1-0:1.0: connect-debounce failed, port 2 disabled [ 12.440000] hub 1-0:1.0: connect-debounce failed, port 2 disabled [ 12.830000] s3c-hsotg s3c-hsotg: s3c_hsotg_rx_data: FIFO 8 bytes on ep0 but no req (DxEPCTl=0x00028000) [ 14.940000] hub 1-0:1.0: connect-debounce failed, port 2 disabled