[PATCH v2 0/2] arm64: dts: qcom: Add RPi 7-inch DSI panel overlays for Monaco/Lemans EVK

[Bjorn Andersson]

On Mon, Sep 07, 2026 at 12:03:52PM +0530, Shashank Maurya wrote:
> Add device tree overlays to enable support for the Raspberry Pi 7-inch
> DSI touchscreen panel on Qualcomm Monaco and Lemans EVK platforms.
> 
> The overlays configure the panel on the primary DSI interface using
> a 2-lane DSI connection and instantiate the panel MCU on the
> corresponding touchscreen I2C bus for each platform. The changes
> allow the Raspberry Pi 7-inch display to be used as an external
> display option on both EVKs without affecting the default platform
> configuration.
> 
> ---
> To: Bjorn Andersson <andersson at kernel.org>
> To: Konrad Dybcio <konradybcio at kernel.org>
> To: Rob Herring <robh at kernel.org>
> To: Krzysztof Kozlowski <krzk+dt at kernel.org>
> To: Conor Dooley <conor+dt at kernel.org>
> To: Florian Fainelli <florian.fainelli at broadcom.com>
> To: Broadcom internal kernel review list <bcm-kernel-feedback-list at broadcom.com>
> Cc: linux-arm-msm at vger.kernel.org
> Cc: devicetree at vger.kernel.org
> Cc: linux-kernel at vger.kernel.org
> Cc: linux-rpi-kernel at lists.infradead.org
> Cc: linux-arm-kernel at lists.infradead.org
> 
> ---
> Shashank Maurya (2):
>       arm64: dts: qcom: monaco-evk: Add Raspberry Pi 7-inch DSI panel overlay
>       arm64: dts: qcom: lemans-evk: Add Raspberry Pi 7-inch DSI panel overlay
> 
>  arch/arm64/boot/dts/qcom/Makefile                  |  4 ++
>  .../dts/qcom/lemans-evk-raspberrypi-dsi-7inch.dtso | 83 ++++++++++++++++++++++
>  .../dts/qcom/monaco-evk-raspberrypi-dsi-7inch.dtso | 82 +++++++++++++++++++++
>  3 files changed, 169 insertions(+)
> ---
> base-commit: ed2647532a225739e86c7f236a2ce82764ec2772
> change-id: 20260907-rpi_dts_overlay-58088ffce047
> prerequisite-message-id: <20260907-rpi_reg-v2-0-0c59aa60d31f at oss.qualcomm.com>

The two dts patches in this series clearly relates to those two
regulator patches, which has received change requests.

I would have sent the 4 patches together in a series, but as you didn't
you sent this series with unmet dependencies.

All I can do now is reject this series as well. Please send v2 once the
driver changes has been merged and you have validated this again.

Regards,
Bjorn

> prerequisite-patch-id: 5212bf185b35c36ed8857a67f29e60386d59ac60
> prerequisite-patch-id: 056a90b913170106a6f8c1feb2366ee83c4375b9
> 
> Best regards,
> --  
> Shashank Maurya <shashank.maurya at oss.qualcomm.com>
>