[PATCH v3 3/4] arm64: dts: ti: k3-am62: Set MMC clock pins as OUTPUT

[Mendez, Judith]

Hi Nishanth,

On 9/4/2026 10:13 AM, Nishanth Menon wrote:
> On 17:54-20260805, Judith Mendez wrote:
>> MMC clock pins must be configured as OUTPUT-only per TRM [0] with
>> receiver disabled (RXACTIVE bit = 0). Change MMC CLK pins from
>> PIN_INPUT to PIN_OUTPUT to match documentation.
>>
>> [0] https://www.ti.com/lit/pdf/spruiv7 Rev. C: Table 12-246. MMCSDi I/O Signals
>>
>> Fixes: a0b8da04153e ("arm64: dts: ti: k3-am62*: Move eMMC pinmux to top level board file")
>> Fixes: 92d8c028aa92 ("arm64: dts: ti: Add k3-am62-pocketbeagle2")
>> Fixes: f5a731f0787f ("arm64: dts: ti: Add k3-am625-beagleplay")
>> Fixes: 2517e476b819 ("arm64: dts: ti: Add support for AM6254atl SiP SK")
>> Fixes: a841581451af ("arm64: dts: ti: Refractor AM625 SK dts")
> 
> This and previous patch, I see you have tried to squash patches that
> makes it harder to apply to various stable trees. Either split them up
> so that it can be applied to the appropriate stable trees OR use # to
> indicate the kernel to apply to -> see stable-rules.
Ok, I will see if I can split the patches. Thanks for your review.

~ Judith