[PATCH 1/1] arm64: dts: ti: k3-j784s4-j742s2-evm-common: Set ACSPCIe refclk to MAIN_PLL2_HSDIV4 for pcie1
Jared McArthur
j-mcarthur at ti.com
Tue Sep 8 12:01:33 PDT 2026
On 9/6/26 23:54, Siddharth Vadapalli wrote:
> On 29/08/26 01:21, Jared McArthur wrote:
>> The ACSPCIe buffers provide the PCIe refclk for external
>> devices. The ACSPCIe reference clock is muxable between multiple
>> sources: SERDESx_REF_DER_OUT_CLK, MAIN_PLL2_HSDIV4_CLKOUT, and
>> SERDESx_REF_OUT_CLK [0]. On reset, the refclk is set to the
>> SERDESx_REF_DER_OUT_CLK. In the J742S2 and J784S4, "the SerDes PCIe
>> Reference Clock Output will be temporarily disabled when changing Data
>> Rates to or from 8.0 GT/s in Derived Refclk mode". Some external PCIe
>> devices cannot tolerate the reference clock being disabled and will
>> therefore fail to link.
>>
>> This advisory is described in more detail as: i2242 of the J784S4
>> Silicon Revision 1.0 (Rev. B) document [1].
>>
>> The refclk for devices connected to PCIe1 is provided by the ACSPCIe
>> buffers in the J742S2XH01EVM [2] and J784S4XEVM [3]. Work around
>> the advisory by setting the ACSPCIe reference clock source to
>> MAIN_PLL2_HSDIV4_CLKOUT. Use the TI SCI clock controller to assign the
>> clock's source [4].
>>
>> [0] https://www.ti.com/lit/zip/spruj52
>> [1] https://www.ti.com/lit/er/sprz536b/sprz536b.pdf
>> [2] https://www.ti.com/lit/zip/SPAC001
>> [3] https://www.ti.com/lit/zip/SPRR458
>> [4] https://software-dl.ti.com/tisci/esd/latest/5_soc_doc/j784s4/clocks.html
>>
>> Signed-off-by: Jared McArthur <j-mcarthur at ti.com>
>
> Since this seems to be a 'Fix', adding a 'Fixes tag' and copying 'stable at vger.kernel.org' will get the fix backported to all LTS kernels.
>
> Rest of the patch however looks good to me.
>
> Reviewed-by: Siddharth Vadapalli <s-vadapalli at ti.com>
>
> Regards,
> Siddharth.
>
Thank you for the comments. I have added a "Fixes" tag and your "reviewed-by" and sent a v2 with "stable at vger.kernel.org" cc'd.
>> ---
>> arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-common.dtsi | 2 ++
>> 1 file changed, 2 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-common.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-common.dtsi
>> index ff3a85cbc524a..7c085663c8880 100644
>> --- a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-common.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-common.dtsi
>> @@ -1206,6 +1206,8 @@ &pcie1_rc {
>> status = "okay";
>> clocks = <&k3_clks 333 0>, <&serdes0 CDNS_TORRENT_REFCLK_DRIVER>;
>> clock-names = "fck", "pcie_refclk";
>> + assigned-clocks = <&k3_clks 415 0>;
>> + assigned-clock-parents = <&k3_clks 415 2>;
>> num-lanes = <2>;
>> reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>;
>> phys = <&serdes0_pcie1_link>;
>
--
Best,
Jared McArthur
More information about the linux-arm-kernel
mailing list