[PATCH 0/4] arm64: dts: freescale: Add Verdin iMX8M Plus overlays

[Ernest Van Hoecke]

This series adds device tree overlays for the Toradex Verdin iMX8M Plus
SoM. The overlays cover audio configuration, a display adapter, and DSI
displays.

The series adds support for:
- NAU8822 Bridge Tied Load configuration on the Verdin Development Board
- DSI-to-HDMI adapter based on the Lontium LT8912B bridge
- Toradex Capacitive Touch Display 7" and 10.1" DSI variants

The Makefile entries build the standalone overlays as DTBOs and add
ready-to-use composed DTBs for selected carrier board and accessory
combinations.

Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke at toradex.com>
---
Ernest Van Hoecke (4):
      arm64: dts: freescale: imx8mp-verdin: Add NAU8822 Bridge Tied Load
      arm64: dts: freescale: imx8mp-verdin: Add DSI to HDMI adapter overlay
      arm64: dts: freescale: imx8mp-verdin: Add Toradex Capacitive Touch Display 10.1" DSI
      arm64: dts: freescale: imx8mp-verdin: Add Toradex Capacitive Touch Display 7" DSI

 arch/arm64/boot/dts/freescale/Makefile             |  28 +++++
 .../freescale/imx8mp-verdin-dev-nau8822-btl.dtso   |  14 +++
 .../dts/freescale/imx8mp-verdin-dsi-to-hdmi.dtso   | 102 ++++++++++++++++
 .../imx8mp-verdin-panel-cap-touch-10inch-dsi.dtso  | 132 ++++++++++++++++++++
 .../imx8mp-verdin-panel-cap-touch-7inch-dsi.dtso   | 133 +++++++++++++++++++++
 5 files changed, 409 insertions(+)
---
base-commit: 26835cf70bbb6207214af55495ea8bed9ea96775
change-id: 20260903-verdin-imx8mp-non-camera-overlays-ready-c9640fdc2183

Best regards,
-- 
Ernest Van Hoecke <ernest.vanhoecke at toradex.com>