[PATCH 3/4] arm64: dts: freescale: imx8mp-verdin: Add Toradex Capacitive Touch Display 10.1" DSI

Ernest Van Hoecke ernestvanhoecke at gmail.com
Mon Sep 7 04:41:32 PDT 2026 

From: Ernest Van Hoecke <ernest.vanhoecke at toradex.com>

Add a device tree overlay for the Toradex Capacitive Touch Display
10.1" on the Verdin DSI_1 interface. The display features an internal
Texas Instruments SN65DSI83 DSI-to-LVDS bridge driving a Riverdi
RVT101HVLNWC00 10.1" WXGA IPS TFT LCD panel. The touch input is
provided by an Ilitek ILI2132 capacitive touch controller.

The overlay is also combined with the Verdin iMX8M Plus Dahlia carrier
board device trees to provide ready-to-use DTBs in both WiFi and
non-WiFi SoM variants.

Link: https://developer.toradex.com/hardware/accessories/displays/capacitive-touch-display-101inch-dsi
Link: https://developer.toradex.com/hardware/accessories/add-ons/dsi-display-adapter
Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke at toradex.com>
---
 arch/arm64/boot/dts/freescale/Makefile             |   7 ++
 .../imx8mp-verdin-panel-cap-touch-10inch-dsi.dtso  | 132 +++++++++++++++++++++
 2 files changed, 139 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 715235b62912..14ea662bdcfd 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -731,6 +731,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw82xx-2x.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-dev-nau8822-btl.dtbo
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-dsi-to-hdmi.dtbo
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dahlia-dsi-to-hdmi.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dahlia-panel-cap-touch-10inch-dsi.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dev-dsi-to-hdmi.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dev.dtb
@@ -739,7 +740,9 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-mallow.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-yavia-dsi-to-hdmi.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-yavia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-zinnia.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-panel-cap-touch-10inch-dsi.dtbo
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dahlia-dsi-to-hdmi.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dahlia-panel-cap-touch-10inch-dsi.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dev-dsi-to-hdmi.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dev-nau8822-btl.dtb
@@ -751,9 +754,13 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-yavia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-zinnia.dtb
 
 imx8mp-verdin-nonwifi-dahlia-dsi-to-hdmi-dtbs := imx8mp-verdin-nonwifi-dahlia.dtb imx8mp-verdin-dsi-to-hdmi.dtbo
+imx8mp-verdin-nonwifi-dahlia-panel-cap-touch-10inch-dsi-dtbs := imx8mp-verdin-nonwifi-dahlia.dtb \
+	imx8mp-verdin-panel-cap-touch-10inch-dsi.dtbo
 imx8mp-verdin-nonwifi-dev-dsi-to-hdmi-dtbs := imx8mp-verdin-nonwifi-dev.dtb imx8mp-verdin-dsi-to-hdmi.dtbo
 imx8mp-verdin-nonwifi-yavia-dsi-to-hdmi-dtbs := imx8mp-verdin-nonwifi-yavia.dtb imx8mp-verdin-dsi-to-hdmi.dtbo
 imx8mp-verdin-wifi-dahlia-dsi-to-hdmi-dtbs := imx8mp-verdin-wifi-dahlia.dtb imx8mp-verdin-dsi-to-hdmi.dtbo
+imx8mp-verdin-wifi-dahlia-panel-cap-touch-10inch-dsi-dtbs := imx8mp-verdin-wifi-dahlia.dtb \
+	imx8mp-verdin-panel-cap-touch-10inch-dsi.dtbo
 imx8mp-verdin-wifi-dev-dsi-to-hdmi-dtbs := imx8mp-verdin-wifi-dev.dtb imx8mp-verdin-dsi-to-hdmi.dtbo
 imx8mp-verdin-wifi-dev-nau8822-btl-dtbs := imx8mp-verdin-wifi-dev.dtb imx8mp-verdin-dev-nau8822-btl.dtbo
 imx8mp-verdin-wifi-yavia-dsi-to-hdmi-dtbs := imx8mp-verdin-wifi-yavia.dtb imx8mp-verdin-dsi-to-hdmi.dtbo
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-panel-cap-touch-10inch-dsi.dtso b/arch/arm64/boot/dts/freescale/imx8mp-verdin-panel-cap-touch-10inch-dsi.dtso
new file mode 100644
index 000000000000..a2cba3d5a0fc
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-panel-cap-touch-10inch-dsi.dtso
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Copyright (c) Toradex
+ *
+ * Toradex Capacitive Touch Display 10.1" on Verdin DSI_1.
+ * On Dahlia (X17) and Development Board (X48), DSI_1 is exposed via a
+ * Samtec LSS-130 connector and requires the Toradex DSI Display Adapter
+ * to convert to FFC/FPC connector.
+ *
+ * https://developer.toradex.com/hardware/accessories/displays/capacitive-touch-display-101inch-dsi
+ * https://www.toradex.com/accessories/capacitive-touch-display-10.1-inch-dsi
+ * https://developer.toradex.com/hardware/accessories/add-ons/dsi-display-adapter
+ * https://www.toradex.com/accessories/verdin-dsi-display-adapter
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&{/} {
+	panel-lvds-bridge {
+		compatible = "riverdi,rvt101hvlnwc00", "panel-lvds";
+		backlight = <&backlight>;
+		data-mapping = "vesa-24";
+		height-mm = <136>;
+		width-mm = <217>;
+
+		/*
+		 * Use a combined horizontal sync and back porch of 96 pixels. The
+		 * panel data sheet value of 88 pixels results in unstable display
+		 * output with the Verdin iMX8M Plus display pipeline.
+		 */
+		panel-timing {
+			clock-frequency = <69300000>;
+			de-active = <1>;
+			hactive = <1280>;
+			hback-porch = <64 64 64>;
+			hfront-porch = <72 72 72>;
+			hsync-active = <0>;
+			hsync-len = <32 32 32>;
+			pixelclk-active = <1>;
+			vactive = <800>;
+			vback-porch = <15 15 15>;
+			vfront-porch = <15 15 15>;
+			vsync-active = <0>;
+			vsync-len = <8 8 8>;
+		};
+
+		port {
+			panel_lvds_bridge_in: endpoint {
+				remote-endpoint = <&dsi_lvds_bridge_out>;
+			};
+		};
+	};
+};
+
+&backlight {
+	/* Verdin PWM_3_DSI (SODIMM 19) */
+	pwms = <&pwm3 0 6666667 0>;
+
+	status = "okay";
+};
+
+/* Verdin I2C_2_DSI */
+&i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+
+	bridge at 2c {
+		compatible = "ti,sn65dsi83";
+		reg = <0x2c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_10_dsi>;
+		/* Verdin GPIO_10_DSI (SODIMM 21) */
+		enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+		vcc-supply = <&reg_1p8v>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port at 0 {
+				reg = <0>;
+
+				dsi_lvds_bridge_in: endpoint {
+					data-lanes = <1 2 3 4>;
+					remote-endpoint = <&mipi_dsi_out>;
+				};
+			};
+
+			port at 2 {
+				reg = <2>;
+
+				dsi_lvds_bridge_out: endpoint {
+					remote-endpoint = <&panel_lvds_bridge_in>;
+				};
+			};
+		};
+	};
+
+	touchscreen at 41 {
+		compatible = "ilitek,ili2132";
+		reg = <0x41>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_9_dsi>,
+			    <&pinctrl_i2s_2_bclk_touch_reset>;
+		/* Verdin GPIO_9_DSI (SODIMM 17) - TOUCH_INT# */
+		/* Rising edge avoids spurious interrupts from the noisy falling edge. */
+		interrupt-parent = <&gpio4>;
+		interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+		/* Verdin I2S_2_BCLK (SODIMM 42) - TOUCH_RESET# */
+		reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&lcdif1 {
+	status = "okay";
+};
+
+&mipi_dsi {
+	samsung,esc-clock-frequency = <16000000>;
+
+	status = "okay";
+};
+
+&mipi_dsi_out {
+	remote-endpoint = <&dsi_lvds_bridge_in>;
+};

-- 
2.43.0

More information about the linux-arm-kernel mailing list