[PATCH] ARM: fix typos in comments

[Hemanth Selam]

Fix typos in comments, reported by scripts/checkpatch.pl using the
misspelling list in scripts/spelling.txt.  Only touches comments, no code
changes.

Assisted-by: Cursor:claude-opus-5
Signed-off-by: Hemanth Selam <hemanth.selam at gmail.com>
---
 arch/arm/mach-imx/suspend-imx6.S           | 2 +-
 arch/arm/mach-omap2/omap4-common.c         | 2 +-
 arch/arm/mach-omap2/omap_hwmod.c           | 6 +++---
 arch/arm/mach-omap2/powerdomains7xx_data.c | 2 +-
 arch/arm/mach-tegra/pm.c                   | 2 +-
 5 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/mach-imx/suspend-imx6.S b/arch/arm/mach-imx/suspend-imx6.S
index 63ccc2d0e920..3f8670296358 100644
--- a/arch/arm/mach-imx/suspend-imx6.S
+++ b/arch/arm/mach-imx/suspend-imx6.S
@@ -234,7 +234,7 @@ set_mmdc_io_lpm_done:
 	 * mask all GPC interrupts before
 	 * enabling the RBC counters to
 	 * avoid the counter starting too
-	 * early if an interupt is already
+	 * early if an interrupt is already
 	 * pending.
 	 */
 	ldr	r11, [r0, #PM_INFO_MX6Q_GPC_V_OFFSET]
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 5d924b85b694..633451b6f548 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -96,7 +96,7 @@ static void omap4_mb(void)
  * interconnects.
  *
  * This situation can happen only when the idle is initiated by a Master
- * Request Disconnection (which is trigged by software when executing WFI
+ * Request Disconnection (which is triggered by software when executing WFI
  * on the CPU).
  *
  * The work-around for this errata needs all the initiators connected
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 03cd523dff87..0f4ba19804c6 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -646,7 +646,7 @@ static struct clockdomain *_get_clkdm(struct omap_hwmod *oh)
  * @oh: struct omap_hwmod *
  *
  * Prevent the hardware module @oh from entering idle while the
- * hardare module initiator @init_oh is active.  Useful when a module
+ * hardware module initiator @init_oh is active.  Useful when a module
  * will be accessed by a particular initiator (e.g., if a module will
  * be accessed by the IVA, there should be a sleepdep between the IVA
  * initiator and the module).  Only applies to modules in smart-idle
@@ -674,7 +674,7 @@ static int _add_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
  * _del_initiator_dep: allow @oh to smart-idle even if @init_oh is active
  * @oh: struct omap_hwmod *
  *
- * Allow the hardware module @oh to enter idle while the hardare
+ * Allow the hardware module @oh to enter idle while the hardware
  * module initiator @init_oh is active.  Useful when a module will not
  * be accessed by a particular initiator (e.g., if a module will not
  * be accessed by the IVA, there should be no sleepdep between the IVA
@@ -1706,7 +1706,7 @@ static int _ocp_softreset(struct omap_hwmod *oh)
 		return -EINVAL;
 	}
 
-	/* For some modules, all optionnal clocks need to be enabled as well */
+	/* For some modules, all optional clocks need to be enabled as well */
 	if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET)
 		_enable_optional_clocks(oh);
 
diff --git a/arch/arm/mach-omap2/powerdomains7xx_data.c b/arch/arm/mach-omap2/powerdomains7xx_data.c
index 921cb1b29cb4..df13451bd0f4 100644
--- a/arch/arm/mach-omap2/powerdomains7xx_data.c
+++ b/arch/arm/mach-omap2/powerdomains7xx_data.c
@@ -223,7 +223,7 @@ static struct powerdomain mpu_7xx_pwrdm = {
 	},
 };
 
-/* l3init_7xx_pwrdm: L3 initators pheripherals power domain  */
+/* l3init_7xx_pwrdm: L3 initiators pheripherals power domain  */
 static struct powerdomain l3init_7xx_pwrdm = {
 	.name		  = "l3init_pwrdm",
 	.prcm_offs	  = DRA7XX_PRM_L3INIT_INST,
diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c
index b21f51b8e19e..d7bc21bdb519 100644
--- a/arch/arm/mach-tegra/pm.c
+++ b/arch/arm/mach-tegra/pm.c
@@ -257,7 +257,7 @@ static int tegra_sleep_core(unsigned long v2p)
  * tegra_lp1_iram_hook
  *
  * Hooking the address of LP1 reset vector and SDRAM self-refresh code in
- * SDRAM. These codes not be copied to IRAM in this fuction. We need to
+ * SDRAM. These codes not be copied to IRAM in this function. We need to
  * copy these code to IRAM before LP0/LP1 suspend and restore the content
  * of IRAM after resume.
  */
-- 
2.48.1