[PATCH 4/4] clk: meson: t7: don't mark sys_ampipe_nand as critical

[Lucas Tanure]

sys_ampipe_nand clocks the pipeline stage inserted in the bus path
between the SD/eMMC controllers and the NIC_MATRIX fabric. It does have
identifiable consumers - the three MMC controllers - so marking it
critical was the wrong tool: the clock should be referenced from the
consumer nodes and claimed by the mmc driver instead.

Drop the CLK_IS_CRITICAL flag and update the comment accordingly.
sys_am2axi0..2 remain critical as they clock the AXI DMA bus itself and
have no single identifiable consumer.

This depends on the MMC controllers actually referencing the clock:
the dt-bindings, mmc driver and t7 DTS changes adding the "pipeline"
clock must land before this one, otherwise the boot hangs and memory
corruption this clock caused are reintroduced.

Fixes: 43e1705ecab9 ("clk: meson: t7: keep the memory fabric clocks running")
Assisted-by: Claude Fable 5 <noreply at anthropic.com>
Signed-off-by: Lucas Tanure <tanure at linux.com>
---
 drivers/clk/meson/t7-peripherals.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/meson/t7-peripherals.c b/drivers/clk/meson/t7-peripherals.c
index 55d09e78593b..2f429ea86796 100644
--- a/drivers/clk/meson/t7-peripherals.c
+++ b/drivers/clk/meson/t7-peripherals.c
@@ -945,13 +945,13 @@ static T7_SYS_PCLK(sys_aucpu,		SYS_CLK_EN0_REG0, 14,	0);
 static T7_SYS_PCLK(sys_cec,		SYS_CLK_EN0_REG0, 16,	0);
 static T7_SYS_PCLK(sys_gdc,		SYS_CLK_EN0_REG0, 17,	0);
 static T7_SYS_PCLK(sys_deswarp,		SYS_CLK_EN0_REG0, 18,	0);
+static T7_SYS_PCLK(sys_ampipe_nand,	SYS_CLK_EN0_REG0, 19,	0);
+static T7_SYS_PCLK(sys_ampipe_eth,	SYS_CLK_EN0_REG0, 20,	0);
 /*
- * NOTE: sys_ampipe_nand and sys_am2axi0..2 provide the clock to the AXI bus
- * used for DMA between the peripherals and the DRAM. After the clocks are
- * disabled, a device that starts a transfer cannot complete it.
+ * NOTE: sys_am2axi0..2 provide the clock to the AXI bus used for DMA between
+ * the peripherals and the DRAM. After the clocks are disabled, a device that
+ * starts a transfer cannot complete it.
  */
-static T7_SYS_PCLK(sys_ampipe_nand,	SYS_CLK_EN0_REG0, 19,	CLK_IS_CRITICAL);
-static T7_SYS_PCLK(sys_ampipe_eth,	SYS_CLK_EN0_REG0, 20,	0);
 static T7_SYS_PCLK(sys_am2axi0,		SYS_CLK_EN0_REG0, 21,	CLK_IS_CRITICAL);
 static T7_SYS_PCLK(sys_am2axi1,		SYS_CLK_EN0_REG0, 22,	CLK_IS_CRITICAL);
 static T7_SYS_PCLK(sys_am2axi2,		SYS_CLK_EN0_REG0, 23,	CLK_IS_CRITICAL);
-- 
2.55.0