[PATCH 2/3] arm64: dts: broadcom: bcm2712: Add thermal monitor

[Peter Robinson]

Hi Andrea,

> > The thermal sensors on the bcm2712 (rpi5) are the same
> > infrastructure as on the bcm2711 (rpi4) so add those
> > details so we can get thermal monitoring on the device
> > as it can get quite hot.
> >
> > Signed-off-by: Peter Robinson <pbrobinson at gmail.com>
> > Cc: Florian Fainelli <florian.fainelli at broadcom.com>
> > Cc: Dave Stevenson <dave.stevenson at raspberrypi.com
> > ---
> >  arch/arm64/boot/dts/broadcom/bcm2712.dtsi | 32 +++++++++++++++++++++++
> >  1 file changed, 32 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
> > index ae1fc9d728c00..c73ed9e066662 100644
> > --- a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
> > +++ b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
> > @@ -508,6 +508,18 @@ hdmi1: hdmi at 7c706400 {
> >                       ddc = <&ddc1>;
> >                       status = "disabled";
> >               };
> > +
> > +             avs_monitor: avs-monitor at 7d542000 {
> > +                     compatible = "brcm,bcm2711-avs-monitor",
> > +                                             "syscon", "simple-mfd";
> > +                     reg = <0x7d542000 0xf00>;
> > +                     status = "okay";
> > +
> > +                     thermal: thermal {
> > +                             compatible = "brcm,bcm2711-thermal";
> > +                             #thermal-sensor-cells = <0>;
> > +                     };
> > +             };
> >       };
> >
> >       axi: axi {
> > @@ -724,4 +736,24 @@ hvs: hvs at 107c580000 {
> >               interrupt-names = "ch0-eof", "ch1-eof", "ch2-eof";
> >               status = "disabled";
> >       };
> > +
> > +     thermal-zones {
> > +             cpu_thermal: cpu-thermal {
> > +                     polling-delay-passive = <1000>;
> > +                     polling-delay = <1000>;
> > +                     coefficients = <(-550) 450000>;
> > +                     thermal-sensors = <&thermal>;
> > +
> > +                     thermal_trips: trips {
> > +                             cpu_crit: cpu-crit {
> > +                                     temperature     = <110000>;
> > +                                     hysteresis      = <0>;
> > +                                     type            = "critical";
> > +                             };
> > +                     };
> > +
> > +                     cooling_maps: cooling-maps {
> > +                     };
> > +             };
> > +     };
> >  };
> > --
> > 2.55.0
> >
>
> Doesn't seem to apply cleanly on v7.3-rc1, could you please rebase?

It should apply cleanly against Florian's next branch here:
https://github.com/Broadcom/stblinux/commits/devicetree-arm64/next