[PATCH net-next 3/3] net: stmmac: Add UltraRISC DP1000 GMAC support

[Andrew Lunn]

> > This looks to be 90% identical to dwmac-sophgo.c.
> > 
> > Do you expect any further changes to this driver? Is everything
> > supported? Are there more clocks? A GPIO for WoL?
> > 
> > I'm just wondering if the common code should be pulled out, or even
> > dwmac-sophgo.c made generic so it can handle all plain boring devices
> > which have RGMII delays and not a lot else.
> > 
> 
> The probe boilerplate is indeed largely similar because both drivers
> use the common stmmac platform helpers. However, their platform-specific
> requirements differ: Sophgo requires additional TX clock handling and
> other configuration, while DP1000 requires fixed TX and RX delay
> handling. ACPI support under development is also intended to use the
> UltraRISC glue driver.

ACPI is going to be fun, since nobody does ACPI networking.

But how big is the change to the glue driver? I expect the change will
be minor, a call to devm_stmmac_probe_config_acpi(), in addition to
devm_stmmac_probe_config_dt(). Anything else?

One problem the stmmac driver has is cut/paste glue driver
development. The same code is repeated again and again. Russell King
spent a lot of time and effort trying to reduce the duplication. So we
should not be adding more duplicated code unless it is actually
required.

	Andrew