[PATCH v4 1/3] pinctrl: imx: answer OUTPUT_ENABLE/INPUT_ENABLE queries from the pad register
Mehmet Fide
mehmet.fide at gmail.com
Thu Sep 3 00:31:41 PDT 2026
From: Mehmet Fide <mehmet.fide at screeningeagle.com>
The mmio pinconf get callback ignores which parameter was requested and
returns the raw conf register, so a generic query through
pinctrl_gpio_get_config() gets register bits back instead of the packed
parameter it asked for.
Decode the requested parameter and answer PIN_CONFIG_OUTPUT_ENABLE and
PIN_CONFIG_INPUT_ENABLE on SoCs that declare where those bits live in
the pad register; Vybrid has OBE at bit 1 and IBE at bit 0. The answer
is 0 with the bit value as the argument, which is what the
pinctrl_gpio_get_config() users (gpio-by-pinctrl, and gpio-mmio in the
next patch) expect. Other parameters and the SCU based SoCs, whose
firmware call returns the raw pad value as well, get -ENOTSUPP; a pin
the device tree never configured gets -EINVAL, as the raw helper already
does, so a caller can tell "no answer for this pin" from "this
controller never answers".
The only in-tree user of the raw register was the debugfs group dump,
which called the callback with an uninitialized config; it now reads
the register through its own helper, like the single pin dump already
did.
The set callback is not touched: the fsl,pins binding hands it the raw
pad register value and that stays the only thing it accepts. Nothing
in-tree sends generic parameters to it on these SoCs; making it
understand them is a separate change.
This gives gpio-mmio a way to read back the line direction on chips
whose direction lives in the pin controller.
Suggested-by: Bartosz Golaszewski <brgl at kernel.org>
Signed-off-by: Mehmet Fide <mehmet.fide at screeningeagle.com>
---
drivers/pinctrl/freescale/pinctrl-imx.c | 54 +++++++++++++++++++++--
drivers/pinctrl/freescale/pinctrl-imx.h | 4 ++
drivers/pinctrl/freescale/pinctrl-vf610.c | 2 +
3 files changed, 56 insertions(+), 4 deletions(-)
diff --git a/drivers/pinctrl/freescale/pinctrl-imx.c b/drivers/pinctrl/freescale/pinctrl-imx.c
index 9a45b376d36f..f08ef52bf4f8 100644
--- a/drivers/pinctrl/freescale/pinctrl-imx.c
+++ b/drivers/pinctrl/freescale/pinctrl-imx.c
@@ -21,6 +21,7 @@
#include <linux/pinctrl/machine.h>
#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinconf-generic.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/pinctrl/pinmux.h>
@@ -291,8 +292,8 @@ struct pinmux_ops imx_pmx_ops = {
.set_mux = imx_pmx_set,
};
-static int imx_pinconf_get_mmio(struct pinctrl_dev *pctldev, unsigned pin_id,
- unsigned long *config)
+static int imx_pinconf_get_raw_mmio(struct pinctrl_dev *pctldev,
+ unsigned int pin_id, unsigned long *config)
{
struct imx_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev);
const struct imx_pinctrl_soc_info *info = ipctl->info;
@@ -312,16 +313,61 @@ static int imx_pinconf_get_mmio(struct pinctrl_dev *pctldev, unsigned pin_id,
return 0;
}
+static int imx_pinconf_get_mmio(struct pinctrl_dev *pctldev,
+ unsigned int pin_id, unsigned long *config)
+{
+ struct imx_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev);
+ const struct imx_pinctrl_soc_info *info = ipctl->info;
+ const struct imx_pin_reg *pin_reg = &ipctl->pin_regs[pin_id];
+ enum pin_config_param param = pinconf_to_config_param(*config);
+ unsigned int mask;
+ u32 raw;
+
+ switch (param) {
+ case PIN_CONFIG_OUTPUT_ENABLE:
+ mask = info->obe_mask;
+ break;
+ case PIN_CONFIG_INPUT_ENABLE:
+ mask = info->ibe_mask;
+ break;
+ default:
+ mask = 0;
+ break;
+ }
+
+ if (!mask)
+ return -ENOTSUPP;
+ if (pin_reg->conf_reg == -1)
+ return -EINVAL;
+
+ raw = readl(ipctl->base + pin_reg->conf_reg);
+ *config = pinconf_to_config_packed(param, !!(raw & mask));
+
+ return 0;
+}
+
static int imx_pinconf_get(struct pinctrl_dev *pctldev,
unsigned pin_id, unsigned long *config)
{
struct imx_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev);
const struct imx_pinctrl_soc_info *info = ipctl->info;
+ if (info->flags & IMX_USE_SCU)
+ return -ENOTSUPP;
+
+ return imx_pinconf_get_mmio(pctldev, pin_id, config);
+}
+
+static int imx_pinconf_get_raw(struct pinctrl_dev *pctldev,
+ unsigned int pin_id, unsigned long *config)
+{
+ struct imx_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev);
+ const struct imx_pinctrl_soc_info *info = ipctl->info;
+
if (info->flags & IMX_USE_SCU)
return info->imx_pinconf_get(pctldev, pin_id, config);
else
- return imx_pinconf_get_mmio(pctldev, pin_id, config);
+ return imx_pinconf_get_raw_mmio(pctldev, pin_id, config);
}
static int imx_pinconf_set_mmio(struct pinctrl_dev *pctldev,
@@ -426,7 +472,7 @@ static void imx_pinconf_group_dbg_show(struct pinctrl_dev *pctldev,
struct imx_pin *pin = &((struct imx_pin *)(grp->data))[i];
name = pin_get_name(pctldev, pin->pin);
- ret = imx_pinconf_get(pctldev, pin->pin, &config);
+ ret = imx_pinconf_get_raw(pctldev, pin->pin, &config);
if (ret)
return;
seq_printf(s, " %s: 0x%lx\n", name, config);
diff --git a/drivers/pinctrl/freescale/pinctrl-imx.h b/drivers/pinctrl/freescale/pinctrl-imx.h
index f65ff45b4003..8fa7e1e2521d 100644
--- a/drivers/pinctrl/freescale/pinctrl-imx.h
+++ b/drivers/pinctrl/freescale/pinctrl-imx.h
@@ -91,6 +91,10 @@ struct imx_pinctrl_soc_info {
unsigned int mux_mask;
u8 mux_shift;
+ /* OBE/IBE bits in the conf register, 0 if the pad does not have them */
+ unsigned int obe_mask;
+ unsigned int ibe_mask;
+
int (*gpio_set_direction)(struct pinctrl_dev *pctldev,
struct pinctrl_gpio_range *range,
unsigned offset,
diff --git a/drivers/pinctrl/freescale/pinctrl-vf610.c b/drivers/pinctrl/freescale/pinctrl-vf610.c
index 76a4bc0181a0..77d077618782 100644
--- a/drivers/pinctrl/freescale/pinctrl-vf610.c
+++ b/drivers/pinctrl/freescale/pinctrl-vf610.c
@@ -319,6 +319,8 @@ static const struct imx_pinctrl_soc_info vf610_pinctrl_info = {
.gpio_set_direction = vf610_pmx_gpio_set_direction,
.mux_mask = 0x700000,
.mux_shift = 20,
+ .obe_mask = 0x2,
+ .ibe_mask = 0x1,
};
static const struct of_device_id vf610_pinctrl_of_match[] = {
--
2.54.0
More information about the linux-arm-kernel
mailing list