[PATCH v2 3/3] arm64: dts: ti: k3-am62p: use ti,am62-m_can compatible for m_can devices

[Kendall Willis]

Prepend "ti,am62-m_can" to the m_can device compatible property since
this compatible adds out-of-band wakeup functionality to the m_can devices.
The m_can pins can be a wakeup source in the deepest low power states,
despite being in the MCU domain which is OFF during deeper low power states
since it has the out-of-band wakeup capability.

Signed-off-by: Kendall Willis <k-willis at ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi
index 5288c959f3c1aecfde363f9e2440253545591171..d26d6b6d0cf46a19bde9f58769b3eb8c86c836ab 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi
@@ -154,7 +154,7 @@ mcu_rti0: watchdog at 4880000 {
 	};
 
 	mcu_mcan0: can at 4e08000 {
-		compatible = "bosch,m_can";
+		compatible = "ti,am62-m_can", "bosch,m_can";
 		reg = <0x00 0x4e08000 0x00 0x200>,
 		      <0x00 0x4e00000 0x00 0x8000>;
 		reg-names = "m_can", "message_ram";
@@ -169,7 +169,7 @@ mcu_mcan0: can at 4e08000 {
 	};
 
 	mcu_mcan1: can at 4e18000 {
-		compatible = "bosch,m_can";
+		compatible = "ti,am62-m_can", "bosch,m_can";
 		reg = <0x00 0x4e18000 0x00 0x200>,
 		      <0x00 0x4e10000 0x00 0x8000>;
 		reg-names = "m_can", "message_ram";

-- 
2.34.1