[PATCH net v3 3/4] net: stmmac: pass the desired EST enable state to est_configure()
Lorenzo Bianconi
lorenzo.bianconi at oss.qualcomm.com
Wed Sep 2 13:15:43 PDT 2026
Pass the desired EST enable state explicitly to est_configure() instead
of having it derive the EEST/EST_INT_EN bits from cfg->enable. This
decouples the hardware programming state from the priv->est.enable
flag, which records whether the taprio offload is attached.
No functional change intended: the callers keep toggling
priv->est.enable around the EST programming, as before.
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi at oss.qualcomm.com>
---
drivers/net/ethernet/stmicro/stmmac/hwif.h | 2 +-
drivers/net/ethernet/stmicro/stmmac/stmmac_est.c | 6 +++---
drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c | 4 ++--
drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c | 4 ++--
4 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h b/drivers/net/ethernet/stmicro/stmmac/hwif.h
index 04dafec021b4..e5579166df1a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/hwif.h
+++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h
@@ -620,7 +620,7 @@ struct stmmac_mmc_ops {
struct stmmac_est_ops {
int (*configure)(struct stmmac_priv *priv, struct stmmac_est *cfg,
- unsigned int ptp_rate);
+ unsigned int ptp_rate, bool enable);
void (*irq_status)(struct stmmac_priv *priv, struct net_device *dev,
struct stmmac_extra_stats *x, u32 txqcnt);
};
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_est.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_est.c
index afc516059b89..f15d4d046aa7 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_est.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_est.c
@@ -26,7 +26,7 @@ static int est_write(void __iomem *est_addr, u32 reg, u32 val, bool gcl)
}
static int est_configure(struct stmmac_priv *priv, struct stmmac_est *cfg,
- unsigned int ptp_rate)
+ unsigned int ptp_rate, bool enable)
{
void __iomem *est_addr = priv->estaddr;
int i, ret = 0;
@@ -62,7 +62,7 @@ static int est_configure(struct stmmac_priv *priv, struct stmmac_est *cfg,
ctrl |= ((NSEC_PER_SEC / ptp_rate) * EST_GMAC5_PTOV_MUL) <<
EST_GMAC5_PTOV_SHIFT;
}
- if (cfg->enable)
+ if (enable)
ctrl |= EST_EEST | EST_SSWL | EST_DFBS;
else
ctrl &= ~EST_EEST;
@@ -70,7 +70,7 @@ static int est_configure(struct stmmac_priv *priv, struct stmmac_est *cfg,
writel(ctrl, est_addr + EST_CONTROL);
/* Configure EST interrupt */
- if (cfg->enable)
+ if (enable)
ctrl = EST_IECGCE | EST_IEHS | EST_IEHF | EST_IEBE | EST_IECC;
else
ctrl = 0;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
index be5b26edd04c..4869827670c8 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
@@ -74,7 +74,7 @@ static int stmmac_adjust_time(struct ptp_clock_info *ptp, s64 delta)
mutex_lock(&priv->est_lock);
priv->est.enable = false;
stmmac_est_configure(priv, priv, &priv->est,
- priv->plat->clk_ptp_rate);
+ priv->plat->clk_ptp_rate, false);
mutex_unlock(&priv->est_lock);
}
@@ -104,7 +104,7 @@ static int stmmac_adjust_time(struct ptp_clock_info *ptp, s64 delta)
priv->est.btr[1] = (u32)time.tv_sec;
priv->est.enable = true;
ret = stmmac_est_configure(priv, priv, &priv->est,
- priv->plat->clk_ptp_rate);
+ priv->plat->clk_ptp_rate, true);
mutex_unlock(&priv->est_lock);
if (ret)
netdev_err(priv->dev, "failed to configure EST\n");
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
index e25a08e4be5f..be48bcabdadc 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
@@ -1082,7 +1082,7 @@ static int tc_taprio_configure(struct stmmac_priv *priv,
tc_taprio_map_maxsdu_txq(priv, qopt);
ret = stmmac_est_configure(priv, priv, &priv->est,
- priv->plat->clk_ptp_rate);
+ priv->plat->clk_ptp_rate, true);
mutex_unlock(&priv->est_lock);
if (ret) {
netdev_err(priv->dev, "failed to configure EST\n");
@@ -1100,7 +1100,7 @@ static int tc_taprio_configure(struct stmmac_priv *priv,
mutex_lock(&priv->est_lock);
priv->est.enable = false;
stmmac_est_configure(priv, priv, &priv->est,
- priv->plat->clk_ptp_rate);
+ priv->plat->clk_ptp_rate, false);
/* Reset taprio status */
for (i = 0; i < priv->plat->tx_queues_to_use; i++) {
priv->xstats.max_sdu_txq_drop[i] = 0;
--
2.55.0
More information about the linux-arm-kernel
mailing list