[PATCH v8 09/11] ARM: dts: aspeed: anacapa: Add LPDB fuse monitor GPIO expander

[Colin Huang]

From: Rex Fu <rex.fu.amd at gmail.com>

Add PCA9554 GPIO expanders for PDB fuse monitor signals on the
Anacapa DVT board.

The patch adds GPIO expander definitions for both the left and
right PDBs under the i2c8 multiplexer and updates the associated
gpio-line-names to reflect the final signal assignments.

Signed-off-by: Rex Fu <rex.fu.amd at gmail.com>
---
 .../aspeed/aspeed-bmc-facebook-anacapa-dvt.dtsi    | 92 ++++++++++++++++++++++
 1 file changed, 92 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dtsi b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dtsi
index 0509bc8bb9cd..2fd7e46daa63 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dtsi
@@ -2,6 +2,98 @@
 
 #include "aspeed-bmc-facebook-anacapa-evt2.dtsi"
 
+// MB - PDB
+&i2c8 {
+	i2c-mux at 72 {
+		i2c at 0 {
+			gpio at 22 {
+				gpio-line-names =
+					"RPDB_FAN_FULL_SPEED_R_N", "RPDB_I2C_TMP432_U8_ALERT_R_N",
+					"RPDB_I2C_TMP432_U29_ALERT_R_N", "RPDB_GLOBAL_WP",
+					"RPDB_FAN_CT_FAN_FAIL_R_N", "RPDB_VERID_A0",
+					"RPDB_VERID_A1", "RPDB_VERID_A2",
+					"RPDB_ALERT_P50V_HSC2_R_N", "RPDB_ALERT_P50V_HSC3_R_N",
+					"RPDB_ALERT_P50V_HSC4_R_N", "RPDB_ALERT_P50V_STBY_R_N",
+					"RPDB_P12V_MB_VRM_ALERT_R_N",
+					"RPDB_P12V_STBY_VRM_ALERT_R_N",
+					"RPDB_PGD_P3V3_STBY_PWRGD_R",
+					"RPDB_P12V_STBY_VRM_PWRGD_BUF_R";
+			};
+
+			gpio at 24 {
+				gpio-line-names =
+					"RPDB_EAM2_PRSNT_MOS_N_R", "RPDB_EAM3_PRSNT_MOS_N_R",
+					"RPDB_PWRGD_P50V_HSC4_SYS_R",
+					"RPDB_PWRGD_P50V_STBY_SYS_BUF_R",
+					"RPDB_P50V_FAN5_R2_PG", "RPDB_P50V_FAN6_R2_PG",
+					"RPDB_P50V_FAN7_R2_PG", "RPDB_P50V_FAN8_R2_PG",
+					"RPDB_SKU_ID0", "RPDB_FAN5_PRSNT_N_R",
+					"", "RPDB_FAN6_PRSNT_N_R",
+					"RPDB_FAN7_PRSNT_N_R", "RPDB_FAN8_PRSNT_N_R",
+					"", "";
+			};
+
+			gpio at 38 {
+				compatible = "nxp,pca9554";
+				reg = <0x38>;
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				gpio-line-names =
+					"RPDB_P50V_FUSE2_TVS1", "RPDB_P50V_FUSE2_TVS2",
+					"RPDB_P50V_FUSE3_TVS1", "RPDB_P50V_FUSE3_TVS2",
+					"RPDB_P50V_FUSE4_TVS1", "",
+					"", "";
+
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+			};
+		};
+
+		i2c at 1 {
+			gpio at 22 {
+				gpio-line-names =
+					"LPDB_FAN_FULL_SPEED_R_N", "LPDB_I2C_TEMP75_U8_ALERT_R_N",
+					"LPDB_I2C_TMP432_U29_ALERT_R_N", "LPDB_GLOBAL_WP",
+					"LPDB_FAN_CT_FAN_FAIL_R_N", "LPDB_VERID_A0",
+					"LPDB_VERID_A1", "LPDB_VERID_A2",
+					"LPDB_ALERT_P50V_HSC0_R_N", "LPDB_ALERT_P50V_HSC1_R_N",
+					"LPDB_ALERT_P50V_HSC5_R_N", "LPDB_I2C_P12V_SW_VRM_ALERT_R_N",
+					"LPDB_EAM0_PRSNT_MOS_N_R", "LPDB_EAM1_PRSNT_MOS_N_R",
+					"LPDB_PWRGD_P50V_HSC5_SYS_R", "BARKLIP_PRSNT_N_R3";
+			};
+
+			gpio at 24 {
+				gpio-line-names =
+					"LPDB_P50V_FAN0_R2_PG", "LPDB_P50V_FAN1_R2_PG",
+					"LPDB_P50V_FAN2_R2_PG", "LPDB_P50V_FAN3_R2_PG",
+					"LPDB_P50V_FAN4_R2_PG", "LPDB_FAN0_PRSNT_N_R",
+					"LPDB_FAN1_PRSNT_N_R", "LPDB_FAN2_PRSNT_N_R",
+					"LPDB_FAN3_PRSNT_N_R", "LPDB_FAN4_PRSNT_N_R",
+					"LPDB_SKU_ID0", "",
+					"", "",
+					"", "LPDB_PG_P3V3_R";
+			};
+
+			gpio at 38 {
+				compatible = "nxp,pca9554";
+				reg = <0x38>;
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				gpio-line-names =
+					"LPDB_P50V_FUSE0_TVS1", "LPDB_P50V_FUSE0_TVS2",
+					"LPDB_P50V_FUSE1_TVS1", "LPDB_P50V_FUSE1_TVS2",
+					"LPDB_P50V_FUSE5_TVS1", "",
+					"", "";
+
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+			};
+		};
+	};
+};
+
 &sgpiom0 {
 	gpio-line-names =
 	/*in - out */

-- 
2.34.1